本文へジャンプ

研究者情報

データ更新日:2024年03月14日

古本 達明 (ふるもと たつあき) 教授 FURUMOTO Tatsuaki

メール 研究室ウェブサイト

所属組織・役職等

設計製造技術研究所 生産加工システム

教育分野

【学士課程】
理工学域 機械工学類 機械創造コース
【大学院前期課程】
自然科学研究科 機械科学専攻 特殊加工学特論
【大学院後期課程】
自然科学研究科 機械科学専攻 デジタルエンジニアリング特論

所属研究室等

生産加工システム講座 TEL:076-234-4723 FAX:076-234-4723

学歴

【出身大学院】
金沢大学 博士課程 自然科学研究科 システム創成科学 2006/03 修了
【出身大学】
金沢大学 工学部 機械システム工学科 1998/03 卒業
【取得学位】
博士(工学)

職歴

石川県工業試験場 石川県工業試験場 技師(1998/04/01-2006/03/31)

生年月

1974年02月

所属学会

精密工学会
精密工学会 アフィリエイト(2009-2012)
日本機械学会
砥粒加工学会
電気加工学会
レーザ加工学会
日本レーザー歯学会
粉体および粉末冶金
日本設計工学会
国際生産工学アカデミー(CIRP)

学内委員会委員等

受賞学術賞

○精密工学会北陸信越支部奨励賞(2006/03/20)
○日本機械学会北陸信越支部技術賞(2006/03/08)
○LEM21 Best Paper受賞(2007/11/09)
○精密工学会アフィリエイト(2009/03/10)
○日本レーザー歯学会優秀発表賞(2009/11/23)
○工作機械技術振興財団 奨励賞(2012/06/12)
○Best Paper Award(2014/07/24)
○Best Paper Award(2014/07/24)
○ベストポスター賞(2016/11/20)
○工作機械技術振興財団 奨励賞(2021/06/30)
○部門長特別表彰(2023/04/21)
○工作機械技術振興財団 奨励賞(2023/06/30)

専門分野

生産工学・加工学、保存治療系歯学

専門分野キーワード

レーザ加工、粉末焼結積層造形,歯科治療

研究課題

レーザによる歯科治療に関する研究

歯科治療でのレーザ光利用は,回転切削器具の代替としてだけでなく,初期う蝕の進行防止や無麻酔治療の実現など,硬組織,軟組織に対する様々な効果が得られることがわかってきた.本研究は,レーザ照射に起因した殺菌効果発現のメカニズムを解明することを目的としている.レーザ照射時の歯質表面温度の測定や誘起衝撃力の測定など,レーザ照射によって生じる現象を工学的見地から捉え,各種現象が殺菌に与える影響について検討を行っている.

金属粉末光造形に関する研究

本研究は,ラピッドツーリングに用いられる鉄系混合粉末のレーザ結合特性について述べられている.結合に用いるレーザは波長が1070nmのYbファイバーレーザである.焦点位置でのレーザ照射部温度が粉末の結合特性に与える影響を調べるため,筆者らが開発した赤外線輻射温度計を用いて測定を行っている.また,結合物の断面をSEMや光学顕微鏡で観察すると共に,結合物を切削したときの抵抗を測定して,切削抵抗による結合物の状態モニタリングの実現に向けて取り組んでいる.

ラピッドツーリングで生じる材料内部の残留応力低減に関する研究

粉末焼結法で金属粉末を造形するとき,レーザによって粉末を溶融・凝集・固化させて層状積層物を造形する機構となるが,レーザ照射による急熱・急冷作用,繰り返し照射による焼入れ,焼戻し効果,粉末内の空隙による造形前後の密度変化の影響等により,造形された製品に残留応力が生じ,造形精度や造形用プレートの反りといった問題が生じる.本研究は,粉末焼結法によって鉄系混合粉末を積層造形し,製作したモデル内部に存在する残留応力を測定して,レーザ照射条件やプレートの材質・種類と発生する内部応力との関係について調べると共に,造形モデルの残留応力低減法について検討を行っている.

レーザによる脆性材料の微細加工に関する研究

著書

  • 3次元CAD・CAE・CAMを活用した創造的な機械設計 日本工業新聞社 2009/10 原著書
  • 軽量化設計-理論と実際 養賢堂 2002/01 123頁

論文

  • YAGレーザによる歯科治療に関する研究(第1報)-レーザ照射部の温度 上田隆司,山田啓司,古本達明 精密工学会誌 66巻 9号 1388-1393頁 2000/09 査読有 原著論文 研究論文(学術雑誌)
  • パルスYAGレーザを用いた超砥粒砥石の切断特性 古本達明,舟田義則,上田隆司 砥粒加工学会誌 47巻 1号 39-43頁 2003/01 査読有 原著論文 研究論文(学術雑誌)
  • パルスNd:YAGレーザを用いたCBN砥石およびダイヤモンド砥石の切断特性-超砥粒砥石のレーザ切断 古本達明,上田隆司,他2名 精密工学会誌 71巻 4号 501-505頁 2005/04 査読有 原著論文 研究論文(学術雑誌)
  • Nd:YAGレーザ用光ファイバのTiO2による先端加工(第2報)-TPファイバによるエナメル質除去特性 古本達明,上田隆司,杉原成良,他2名 日本レーザー歯学会誌 16巻 2号 86-92頁 2005/10 査読有 原著論文 研究論文(学術雑誌)
  • パルスNd:YAGレーザによる超砥粒砥石の穴開け加工に関する研究-軸付き砥石へのレーザ加工の適用 古本達明,上田隆司,尾倉秀一 砥粒加工学会誌 53巻 1号 34-38頁 2006/01 査読有 原著論文 研究論文(学術雑誌)

全て表示

  • 積層造形用金属粉末の各種物性測定に関する研究-熱伝導率およびレーザ光吸収率の簡易測定方法の提案- 古本達明,上田隆司,細川晃,他2名 精密工学会誌 73巻 5号 558-562頁 2007/05 査読有 原著論文 研究論文(学術雑誌)
  • Nd:YAGレーザ用光ファイバのTiO2による先端加工(第3報)-TPファイバ先端のエネルギ分布 古本達明,上田隆司,杉原成良,他2名 日本レーザー歯学会誌 18巻 1号 34-41頁 2007/04 査読有 原著論文 研究論文(学術雑誌)
  • Nd:YAGレーザー用光ファイバーのTiO2による先端加工(第4報)- TPファイバー先端の温度測定 - 古本達明,上田隆司,細川晃,他3名 日本レーザー歯学会誌 18巻 2号 103-110頁 2007/10 査読有 原著論文 研究論文(学術雑誌)
  • レーザ歯科治療用光ファイバー先端の加工 杉原成良,古本達明,上田隆司 砥粒加工学会誌 52巻 3号 164-169頁 2008/03 査読有 原著論文 研究論文(学術雑誌)
  • Nd:YAGレーザーとTiO2によるin vitroでの殺菌効果 和賀正明,上田隆司,古本達明,杉原成良 日本レーザー歯学会誌 19巻 1号 10-16頁 2008/04 査読有 原著論文 研究論文(学術雑誌)
  • Yb:fiberレーザによる混合金属粉末の焼結特性に関する研究-プレート面性状の違いによるライン焼結物の幅および比切削抵抗の評価- 古本達明,上田隆司,細川晃,他2名 精密工学会誌 72巻 8号 836-840頁 2008/08 査読有 原著論文 研究論文(学術雑誌)
  • ファイバーレーザを用いた金属粉末のレーザ結合に関する研究-レーザ照射部の温度測定 古本達明,上田隆司,他4名 粉体および粉末冶金 55巻 8号 561-567頁 2008/08 査読有 原著論文 研究論文(学術雑誌)
  • Study on cutting characteristics of sintered material with Yb:Fiber laser Abdullah YASSIN,上田隆司,細川晃,古本達明,他2名 Journal of Advanced Mechanical Design, Systems, and Manufacturing 2巻 5号 833-843頁 2008/08 査読有 原著論文 研究論文(学術雑誌)
  • 旋削加工におけるMQLの効果-ファイバ連結型2色温度計を用いた工具刃先温度の測定 細川晃,古本達明,他3名 精密工学会誌 74巻 10号 1080-1085頁 2008/10 査読有 原著論文 研究論文(学術雑誌)
  • レーザ歯科治療に用いる光ファイバ先端の加工 第2報:ファイバ先端の加工材評価 古本達明,上田隆司,他2名 JSAT 52巻 10号 595-600頁 2008/10 査読有 原著論文 研究論文(学術雑誌)
  • 金属粉末光造形複合加工における小径ボールエンドミルの切削性能 上田隆司,Abdullah YASSIN,古本達明,他3名 砥粒加工学会誌 52巻 12号 718-723頁 2008/12 査読有 原著論文 研究論文(学術雑誌)
  • 旋削加工におけるMQLの効果 -工具すくい面および逃げ面に供給されるオイルミストの作用機構 小澤匡史,細川晃,古本達明,他2名 JSAT 53巻 2号 88-93頁 2009/02 査読有 原著論文 研究論文(学術雑誌)
  • Cutting Tool Edge Temperature in Finish Hard Turning of Case Hardened Steel 田中隆太郎,古本達明,他4名 Key Engineering Materials 407-708巻 672-675頁 2009/02 査読有 原著論文 研究論文(学術雑誌)
  • Prevention of Burr Formation in Face Milling of Carbon Steel by Laser Hardening 田中隆太郎,古本達明,他4名 Key Engineering Materials 407-408巻 672-675頁 2009/02 査読有 原著論文 研究論文(学術雑誌)
  • Influence of On-the-machine Laser Hardening on Machinability of Carbon Steel in Turning 田中隆太郎,古本達明,他4名 Key Engineering Materials 407-408巻 690-693頁 2009/02 査読有 原著論文 研究論文(学術雑誌)
  • Study on Laser Consolidation of Metal Powder with Yb fiber laser -Temperature Measurement of Laser Irradiation Spot- 上田隆司,他4名 Journal of Laser Micro/Nanoengineering 4巻 1号 22-27頁 2009/02 査読有 原著論文 研究論文(学術雑誌)
  • 炭素鋼の正面フライスにおけるバリの抑制におよぼす被削材のレーザ熱処理の効果 田中隆太郎,古本達明,他3名 砥粒加工学会誌 53巻 6号 379-384頁 2009/06 査読有 原著論文 研究論文(学術雑誌)
  • Fabrication of the Quartz Optical Fiber for Dental Treatment with Nd:YAG Laser - Proposal of the New Process with TiO2 powder 古本達明,上田隆司,他2名 Optics and Lasers in Engineering 49巻 9号 941-947頁 2009/06 査読有 原著論文 研究論文(学術雑誌)
  • Experimental Investigation on Cutting Mechanism of Sintered Material Using Small Ball End Mill Abdullah YASSIN, T. FURUMOTO et al. Journal of Materials Processing Techniology 209巻 5680-5689頁 2009/07 査読有 原著論文 研究論文(学術雑誌)
  • Study on Laser Consolidation of Metal Powder with Yb:fiber laser - Evaluation of Line Consolidation Structure - T. FURUMOTO, T. UEDA et al. Journal of Materials Processing Technology 209巻 5973-5980頁 2009/07 原著論文 研究論文(学術雑誌)
  • Nd:YAGレーザー照射時の誘起衝撃力の測定 古本達明,上田隆司,他4名 日本レーザー歯学会誌 20巻 2号  67-73頁 2009/08 査読有 原著論文 研究論文(学術雑誌)
  • 長棒を用いたレーザ誘起衝撃応力の測定 上田隆司,他4名 日本機械学会論文集(C編) 75巻 758号  2810-2815頁 2009/10 査読有 原著論文 研究論文(学術雑誌)
  • Dental Treatment with Laser Beam, Monitoring Methods to Realize Safety Removal of Hard Tooth Tissues 山田啓司,古本達明,他3名 International Journal of Automation Technology 3巻 5号  494-501頁 2009/11 査読有 原著論文 研究論文(学術雑誌)
  • Control of Machined Workpiece Edge Shape by Laser Hardening 田中隆太郎,古本達明,他3名 International Journal of Automation Technology 4巻 1号  21-25頁 2010/01 査読有 原著論文 研究論文(学術雑誌)
  • Ybファイバーレーザによる混合金属粉末の焼結特性に関する研究(第2報)-焼結温度と切削抵抗の評価- 古本達明,上田隆司,他4名 精密工学会誌 76巻 2号  173-177頁 2010/02 査読有 原著論文 研究論文(学術雑誌)
  • Study on Laser Assisted Milling of Ferrous Based Consolidated Material 古本達明,上田隆司,他4名 Journal of Mechanical Science and Technology 24巻 1号  127-130頁 2010/03 査読有 原著論文 研究論文(学術雑誌)
  • Study on Wear Mechanism in Milling Sintered Material アブドラヤシン,古本達明,他4名 Journal of Mechanical Science and Technology 24巻 1号  77-80頁 2010/03 査読有 原著論文 研究論文(学術雑誌)
  • Study on Measurement of Dynamic Force Induced by Nd:YAG Laser Beam 古本達明,上田隆司,他5名 Journal of Laser Micro/Nanoengineering 5巻 1号  59-63頁 2010/02 査読有 原著論文 研究論文(学術雑誌)
  • レーザ複合切削による創生面の摩擦特性,静止摩擦における特性 田中隆太郎,井上豪,細川晃,古本達明,上田隆司 日本機械学会論文集(C編) 76巻 764号 794-799頁 2010/04 査読有 原著論文 研究論文(学術雑誌)
  • Turning of Difficult-to-Machine Materials with Actively Driven Rotary Tools A. Hosokawa, T. Ueda, R. Onishi, R. Tanaka and T. Furumoto CIRP Annals - Manufacturing Technology 59巻 1号 89-92頁 2010/06 査読有 原著論文 研究論文(学術雑誌)
  • 炭素鋼の正面フライス加工におけるバリの抑制におよぼす被削材のレーザ熱処理の効果(第2報),レーザ照射条件およびカッターパスの最適化 鬼頭昂志,田中隆太郎,他3名 砥粒加工学会誌 54巻 6号 359-365頁 2010/06 査読有 原著論文 研究論文(学術雑誌)
  • Study on Elucidation of Bactericidal Effects Induced by Laser Beam Irradiation, Measurement of Dynamic Stress on Laser Irradiated Surface 古本達明,上田隆司,他3名 Optics and Lasers in Engineering  48巻 9号 827-833頁 2010/09 査読有 原著論文 研究論文(学術雑誌)
  • Study on Reduction of Residual Stress Induced in Rapid Tooling Process, Influence of Heating Conditions on Residual Stress 古本達明,上田隆司,他3名 Key Engineering Materials 447-448巻 785-789頁 2010/10 査読有 原著論文 研究論文(学術雑誌)
  • Experimental Investigation on Laser Flattening of Sheet Metal 上田隆司,古本達明,他3名 Optics and Lasers in Engineering  49巻 1号 137-144頁 2011/01 査読有 原著論文 研究論文(学術雑誌)
  • Surface Temperature during Cavity Preparation on Human Tooth by Er:YAG Laser Irradiation 古本達明,上田隆司,他2名 CIRP Annals - Manufacturing Technology 60巻 1号 555-558頁 2011/06 査読有 原著論文 研究論文(学術雑誌)
  • Study on Internal Face Finishing of Cooling Channel in Injection Mold with Free Abrasive Grains 古本達明,上田隆司,他2名 Journal of Materials Processing Technology 211巻 11号 1742-1748頁 2011/07 査読有 原著論文 研究論文(学術雑誌)
  • CO2パルスレーザによるサファイアウエハの熱応力割断 上田隆司,古本達明,他3名 砥粒加工学会誌 55巻 7号 424-426頁 2011/07 査読有 原著論文 研究論文(学術雑誌)
  • Nd:YAGレーザーとTiO2によるin vitroでの殺菌効果(第2報) 和賀正明,古本達明,他2名 日本レーザー歯学会誌 22巻 2-3号 77-84頁 2011/08 査読有 原著論文 研究論文(学術雑誌)
  • レーザ複合切削による創生面の摩擦特性(第2報),切削における表面創成メカニズムと静止摩擦力におよぼす油剤粘度の影響 田中隆太郎,他5名 日本機械学会論文集(C編) 77巻 780号 241-246頁 2011/08 査読有 原著論文 研究論文(学術雑誌)
  • レーザ熱処理によるステンレス鋼のフライス加工における切削バリの抑制 田中隆太郎,他4名 日本機械学会論文集(C編) 77巻 783号 4318-4323頁 2011/11 査読有 原著論文 研究論文(学術雑誌)
  • 2波長レーザを用いた硬脆材料のレーザ割断に関する研究,炭酸ガスレーザおよびEr:YAGレーザを用いた厚肉ガラスの精密切断 上田隆司,他,4名 日本機械学会論文集(C編) 78巻 788号 1295-1304頁 2012/04 査読有 原著論文 研究論文(学術雑誌)
  • Study on Thermal and Strain Behavior in Selective Laser Sintering Process Mohd Sanusi Abdul Aziz, et al. Key Engineering Materials 516巻 203-208頁 2012/06 査読有 原著論文 研究論文(学術雑誌)
  • Development of tool edge temperature measurement method in wet cutting, Application for CBN and poly crystalline diamond tools H. Nishimoto, et al. Journal of Advanced Mechanical Design, Systems, and Manufacturing 6巻 6号 916-922頁 2012/09 査読有 原著論文 研究論文(学術雑誌)
  • Pre-Groove Development for Laser Cleaving of Brittle Materials by Using Micro-Lens T. Ishikawa, et al. Journal of Advanced Mechanical Design, Systems, and Manufacturing 6巻 6号 841-848頁 2012/09 査読有 原著論文 研究論文(学術雑誌)
  • Finishing Performance of Cooling Channel with Face Protuberance inside the Molding Die T. Furumoto, et al.  Journal of Materials Processing Technology 212巻 10号 2154-2160頁 2012/10 査読有 原著論文 研究論文(学術雑誌)
  • 遊離砥粒を用いた金型内部冷却水管の仕上げ加工,表面突起付加による曲線水管の加工性改善 古本達明,他5名 砥粒加工学会誌 56巻 10号 698-702頁 2012/10 査読有 原著論文 研究論文(学術雑誌)
  • Thermal Conductivity of Metal Powder and Consolidated Material fabricated via Selective Laser Melting Mohd Rizal Alkahari, et al. Key Engineering Materials 523-524巻 244-249頁 2012/11 査読有 原著論文 研究論文(学術雑誌)
  • Cutting Performance of Ceramic Tools in Turning of Mild Steel R. Tanaka, et al. Key Engineering Materials 523-524巻 493-496頁 2012/11 原著論文 研究論文(学術雑誌)
  • Er:YAGレーザによる歯質の除去特性,注水による気泡の発現と効果 古本達明,他5名 日本機械学会論文集(C編) 78巻 794号 3594-3604頁 2012/10 査読有 原著論文 研究論文(学術雑誌)
  • 複合機械加工による高品位面性状を有する表面改質層の生成 田中隆太郎.他5名 日本機械学会論文集(C編) 78巻 794号 3605-3614頁 2012/10 査読有 原著論文 研究論文(学術雑誌)
  • 焼結鋼の旋削加工における工具刃先温度と仕上げ面粗さ 田中隆太郎,他5名 砥粒加工学会誌 56巻 12号 819-823頁 2012/12 査読有 原著論文 研究論文(学術雑誌)
  • Analysis of Cutting Behavior during Tapping and Measurement of Tool Edge Temperature Measured by a Two-Color Pyrometer Journal of Advanced Mechanical Design, Systems, and Manufacturing 7巻 2号 115-124頁 2013/03 査読有 原著論文 研究論文(学術雑誌)
  • Reduction of Residual Stress inside the Consolidated Structure Obtained by Layered Manufacturing Process Journal of Advanced Mechanical Design, Systems, and Manufacturing 7巻 2号 244-256頁 2013/04 査読有 原著論文 研究論文(学術雑誌)
  • Effects of Tool Edge Geometry on Cutting Temperature in Continuous Cutting of Case Hardened Steel R, Tanaka, T. Furumoto, et al. International Journal of Automation Technology 7巻 3号 313-320頁 2013/03 査読有 原著論文 研究論文(学術雑誌)
  • Wear Characteristics of Ceramic Tools When Turning BN Free-machining Steel R, Tanaka, T. Furumoto, et al. Journal of Advanced Mechanical Design, Systems, and Manufacturing 7巻 3号 474-484頁 2013/06 査読有 原著論文 研究論文(学術雑誌)
  • Investigation of Laser Consolidation Process for Metal Powder by Two-Color Pyrometer and High Speed Video Camera CIRP Annals - Manufacturing Technology 62巻 1号 223-226頁 2013/08 査読有 原著論文 研究論文(学術雑誌)
  • 溝加工が施されたサファイアウエハのレーザ割断 上田隆司,松永隆秀,古本達明,細川晃,長友正平 日本機械学会論文集(C編) 79巻 805号 3285-3289頁 2013/10 査読有 原著論文 研究論文(学術雑誌)
  • Consolidation Characteristics of SCM Based Metal Powder Journal of Advanced Mechanical Design, Systems, and Manufacturing 8巻 1号 1-16頁 2014/04 査読有 原著論文 研究論文(学術雑誌)
  • Melt Pool and Single Track Formation in Selective Laser Sintering/ Selective Laser Melting M. R. Alkahari, T. Furumoto, et al. Advanced Materials Research 933巻 196-201頁 2014/05 査読有 原著論文 研究論文(学術雑誌)
  • 軸付砥石によるセラミックス基複合材料の研削加工,ビトリファイドボンド砥石による高能率加工の実現 古本達明,他3名 砥粒加工学会誌 58巻 6号 380-385頁 2014/06 査読有 原著論文 研究論文(学術雑誌)
  • ダイヤモンドコートエンドミルによる超硬合金の切削加工,微小送りにおける切削機構の基礎的検討 渡邊英人,岡田将人,古本達明,他2名 精密工学会誌 80巻 6号 615-615頁 2014/06 査読有 原著論文 研究論文(学術雑誌)
  • High-quality machining of CFRP with high helix end mill CIRP Annals - Manufacturing Technology 63巻 1号 89-92頁 2014/06 査読有 原著論文 研究論文(学術雑誌)
  • Thermal Stress Cleaving of Si-Wafer, Investigation of Fracture Initiation during Laser Beam Irradiation Advanced Materials Research 1101巻 412-418頁 2015/01 査読有 原著論文 研究論文(学術雑誌)
  • Permeability and strength of a porous metal structure fabricated by additive manufacturing T. Furumoto, et al. Journal of Materials Processing Technology 219巻 10-16頁 2015/01 査読有 原著論文 研究論文(学術雑誌)
  • CO2レーザ照射時の歯質除去機構 辺見慎吾,古本達明,他 砥粒加工学会誌 59巻 3号 145-147頁 2015/03 査読有 原著論文 研究論文(学術雑誌)
  • A Study on Separating of a Silicon Wafer with Moving Laser Beam by Using Thermal Stress Cleaving 223巻 252-261頁 2015/04 査読有 原著論文 研究論文(学術雑誌)
  • Influence of Cutting Fluid on Tool Edge Temperature in End Milling Titanium Alloy R. Tanaka, A. Hosokawa, T. Furumoto, M. Okada, T. Ueda Journal of Advanced Mechanical Design, Systems, and Manufacturing 9巻 5号 1-10頁 2015/12 査読有 原著論文 研究論文(学術雑誌)
  • Mechanisms and Characteristics of Direct Cutting of Tungsten Carbide Using a Diamond-coated Carbide End Mill M. Okada, A. Yoshida, T. Furumoto, H. Watanabe, N. Asakawa, M. Otsu  International Journal of Advanced Manufacturing Technology 86巻 1827-1839頁 2016/01 査読有 原著論文 研究論文(学術雑誌)
  • Cutting performance of CBN and diamond tools in dry turning of cemented carbide A. M. N. A. Kamaruddin, A. Hosokawa, T. Ueda, T. Furumoto, T. Koyano Mechanical Engineering Journal 3巻 1号 115-124頁 2016/01 査読有 原著論文 研究論文(学術雑誌)
  • High speed cutting of Ti-6Al-4V with diamond tools A. M. N. A. Kamaruddin, A. Hosokawa, T. Ueda, T. Furumoto International Journal of Automation Technology 10巻 3号 411-419頁 2016/05 査読有 原著論文 研究論文(学術雑誌)
  • High-quality End Milling of CFRP, Inclination milling with high helix end mill A. Hosokawa, N. Hirose, T. Ueda, T. Koyano, T. Furumoto International Journal of Automation Technology 10巻 3号 372-380頁 2016/05 査読有 原著論文 研究論文(学術雑誌)
  • Micro Electrical Discharge Machining Using High Electric Resistance Electrodes T. Koyano, Y. Sugata, A. Hosokawa, T. Furumoto Precision Engineering 47巻 480-486頁 2017/01 査読有 原著論文 研究論文(学術雑誌)
  • レーザを用いた積層ウエハの熱応力割断,ガラス/シリコン積層ウエハ内部のき裂進展メカニズム 古本達明, 藤澤和人, 細川 晃, 小谷野智広, 上田隆司 83巻 2号 167-172頁 2017/02 査読有 原著論文 研究論文(学術雑誌)
  • Study on Deformation Restraining of Metal Powder Fabricated by Selective Laser Melting T. Furumoto, et al. Materials Processing Technology 245 巻 2017/07/01 査読有 原著論文 研究論文(学術雑誌)
  • Evaluation of the Minimum Quantity Lubrication in Orthogonal Cutting with the Application of Finite Element Method A. S. Jamaludin, A. Hosokawa, T. Furumoto, T. Koyano, Y. Hashimoto International Journal of Mechanical and Mechatronics Engineering 17 巻 1号 104-109頁 2017/01 査読有 原著論文 研究論文(学術雑誌)
  • 両面研磨におけるウェハとキャリアの接触を考慮したウェハ挙動の高精度解析手法の開発 橋本洋平,近藤亮太,古本達明,細川晃 精密工学会誌 83巻 5号 433-438頁 2017/05/05 査読有 原著論文 研究論文(学術雑誌)
  • 両面研磨シミュレーションに基づくウェハ挙動の検討 橋本洋平.佐野智哉,古本達明,細川晃 精密工学会誌 84巻 2号 188-193頁 2018/02/05 査読有 原著論文 研究論文(学術雑誌)
  • Experimental investigation of melt pool behaviour during selective laser melting by high speed imaging T. Furumoto, et al. CIRP Annals - Manufacturing Technology 67 巻 1号 253-256頁 2018/05/03 査読有 原著論文 研究論文(学術雑誌)
  • Design and development of a low-cost 3D metal printer Nor Ana Rosli, Mohd Rizal Alkahari, Faiz Redza Ramli, Shajahan Maidin, Mohd Nizam Sudin, Sivarao Subramoniam, Tatuaki Furumoto Journal of Mechanical Engineering Research and Developments 41巻 3号 47-54頁 2018/09 査読有 原著論文 研究論文(学術雑誌)
  • Analysis of Electrochemical Machining Process with Ultrashort Pulses Considering Stray Inductance of Pulse Power Supply T. Koyano, A. Hosokawa, T. Furumoto Journal of Advanced Mechanical Design, Systems, and Manufacturing 12巻 5号 18-00169頁 2018/07 査読有 原著論文 研究論文(学術雑誌)
  • Turning of Difficult-to-Machine Materials with an Actively Driven Rotary Tool (ADRT) —Proposition of reciprocating turning contingent on fundamental cutting characteristics— A. Hosokawa, H. Yoshimatsu, T. Koyano, T. Furumoto, et al. Journal of Advanced Mechanical Design, Systems, and Manufacturing 12巻 5号 18-00175頁 2018/07 査読有 原著論文 研究論文(学術雑誌)
  • Evaluation of separating process for different materials by thermal stress cleaving technique Alias Mohd Saman, Tatsuaki Furumoto International Journal of Engineering and Technology 7巻 4号 158-161頁 2018 査読有 原著論文 研究論文(学術雑誌)
  • Micro-Electrical Discharge Machining of Micro-Rods Using Tool Electrodes with High Electrical Resistivity T. Koyano, Y. Sugata, A. Hosokawa, T. Furumoto Precision Engineering 55巻 95-100頁 2018/09 査読有 原著論文 研究論文(学術雑誌)
  • Formation mechanism of pores inside built structure obtained by metal-based additive manufacturing K. Egashira, T. Furumoto, et al. International Journal of Automation Technology 13巻 3号 330-337頁 2019/03 査読有 原著論文 研究論文(学術雑誌)
  • Estimation of material removal rate distribution considering workpiece attitude in double-sided polishing Y. Hashimjoto, T. Sano, T. Furumoto, A. Hosokawa Journal of Advanced Mechanical Design, Systems, and Manufacturing 13巻 1号 JAMDSM0020頁 2019/02 査読有 原著論文 研究論文(学術雑誌)
  • Development an identification method of friction coefficient between wafer and carrier in double-sided lapping Y. Hashimjoto, T. Sano, T. Furumoto, A. Hosokawa Precision Engineering 56 巻 364-369頁 2019/02 査読有 原著論文 研究論文(学術雑誌)
  • Microstructure of Built Part Obtained by Powder Bed Fusion Process with Metal T. Furumoto, et al.  Key Engineering Materials 825巻 1-6頁 2019/10 査読有 原著論文 研究論文(学術雑誌)
  • Study on high quality thermal stress cleavage of thick sapphire wafer T. Kawabe, T. Furumoto, et al. Key Engineering Materials 825巻 39-44頁 2019/10 査読有 原著論文 研究論文(学術雑誌)
  • Studies on Eco-friendly Grinding with Extremely Small Amount of Coolant, Applicability of contact type flexible blush nozzle A. Hosokawa, R. Shimizu, T. Kiwata, T. Koyano, T. Furumoto, Y. Hashimoto International Journal of Automation Technology 13巻 5号 648-656頁 2019/09 査読有 原著論文 研究論文(学術雑誌)
  • Studies on high-efficiency and high-precision orthogonal turn-milling-The effects of relative cutting speed and tool axis offset on tool flank temperature K. Shimanuki. A. Hosokawa, T. Koyano, T. Furumoto, Y. Hashimoto Precision Engineering 66巻 180-187頁 2020/07/22 査読有 原著論文 研究論文(学術雑誌)
  • Fundamental investigation of gyro finishing experimental investigation of contact force between cylindrical workpiece and abrasive media under dry condition Y. Hashimoto, T. Ito, Y. Nakayama, T. Furumoto, A. Hosokawa Precision Engineering 67巻 123-136頁 2020/09/20 査読有 原著論文 研究論文(学術雑誌)
  • CO2 laser cleavage of chemically strengthened glass T. Furumoto, Y. Hashimoto, H. Ogi, T. Kawabe, M. Yamaguchi, T. Koyano, A. Hosokawa Journal of Materials Processing Technology 289巻 116961頁 2020/11/05 査読有 原著論文 研究論文(学術雑誌)
  • Experimental investigation into the spatter particle behavior of maraging steel during selective laser melting T. Furumoto, K. Egashira, K. Oishi, S. Abe, M. Yamaguchi, Y. Hashimoto, T. Koyano, A. Hosokawa Journal of Advanced Mechanical Design, Systems, and Manufacturing 15巻 4号 jamdsm0039頁 2020/11/11 査読有 原著論文 研究論文(学術雑誌)
  • Investigation of orthogonal turn-milling for higher machining efficiency and accuracy, Relationship between material removal rate and tool flank temperature K. Shimanuki. A. Hosokawa, T. Koyano, T. Furumoto, Y. Hashimoto Journal of Advanced Mechanical Design, Systems, and Manufacturing 15巻 4号 jamdsm0043頁 2020/11/19 査読有 原著論文 研究論文(学術雑誌)
  • Internal face finishing for a cooling channel using a fluid containing free abrasive grains M. Yamaguchi, T. Furumoto, S. Inagaki, M. Tsuji, Y. Ochiai, Y. Hashimoto, T. Koyano, A. Hosokawa The International Journal of Advanced Manufacturing Technology 114 巻 497-507頁 2021/03/17 査読有 原著論文 研究論文(学術雑誌)
  • Electrochemical milling using a parallel mechanism for high-speed translation of tool electrodes T. Koyano, et al. International Journal of Electrical Machining 26巻 25-32頁 2021/03/26 査読有 原著論文 研究論文(学術雑誌)
  • Thermal stress cleavage of a single-crystal round sapphire bar by carbon dioxide laser T. Furumoto et al.,  Journal of Materials Processing Technology 287巻 117237頁 2021/05/26 査読有 原著論文 研究論文(学術雑誌)
  • Effects of the powder morphology, size distribution, and characteristics on the wettability of selective laser melted H13 steel M. Yamaguchi, T. Furumoto, et al. Journal of Advanced Mechanical Design, Systems, and Manufacturing 15巻 3号 1-13頁 2021/06/03 査読有 原著論文 研究論文(学術雑誌)
  • Fabrication of release agent supply die with porous structure by using metal-based AM H. Chiba, T. Furumoto et al. International Journal of Automation Technology 15巻 6号 2021/11/05 査読有 原著論文 研究論文(学術雑誌)
  • Improving surface quality using laser scanning and machining strategy combining powder bed fusion and machining processes T. Furumoto, S. Abe, et al. The International Journal of Advanced Manufacturing Technology 117巻 11号 3405-3413頁 2021/08/28 査読有 原著論文 研究論文(学術雑誌)
  • A novel measurement method for the torque acting on the upper platen in a three-way double-sided lapping/polishing machine Y. Hashimoto, R. Ozaki, T. Furumoto, A. Hosokawa Precision Engineering 72巻 891-898頁 2021/08/12 査読有 原著論文 研究論文(学術雑誌)
  • Evaluating the thermal characteristics of laser powder bed fusion T. Furumoto, K. Oishi, et al. Journal of Materials Processing Technology 299巻 117384頁 2021/09/24 査読有 原著論文 研究論文(学術雑誌)
  • A calculation method for workpiece profile variation during double-sided lapping by considering workpiece elastic deformation Y. Hashimoto, R. Ozaki, T. Furumoto, A. Hosokawa Precision Engineering 73巻 457-469頁 2021/10/05 査読有 原著論文 研究論文(学術雑誌)
  • Influence of metal transfer behavior under Ar and CO2 shielding gases on geometry and surface roughness of single and multi-layer structures in GMAW-based wire arc additive manufacturing of mild steel M. Yamaguchi, R. Komata, T. Furumoto, et al. The International Journal of Advanced Manufacturing Technology 119巻 911-926頁 2021/11/11 査読有 原著論文 研究論文(学術雑誌)
  • Improving finishing efficiency using a cover plate in gyro finishing Y. Hashimoto, Y. Nakayama, T. Furumoto, A. Hosokawa Precision Engineering 74巻 140-146頁 2021/11/05 査読有 原著論文 研究論文(学術雑誌)
  • Evaluation of spatter particles, metal vapour jets, and depressions considering influence of laser incident angle on melt pool behaviour K. Tsubouchi, T. Furumoto, et al. The International Journal of Advanced Manufacturing Technology 120巻 1821-1830頁 2022/02/15 査読有 原著論文 研究論文(学術雑誌)
  • ナノシリカ粒子の添加による付加製造用金属粉末の流動性改善と造形特性 坪内光太郎,古本達明,山口貢 製密工学会誌 88巻 5号 415-419頁 2022/05/05 査読有 原著論文 研究論文(学術雑誌)
  • Influence of process parameters on the geometry and surface defects of the single-line track in the directed energy deposition of pure copper onto 304 stainless-steel using a blue laser M. Yamaguchi, M. Yamazaki,Y. Funada, T. Yachi, A. Saikai, T. Furumoto  The International Journal of Advanced Manufacturing Technology 121巻 1191-1100頁 2022/05/25 査読有 原著論文 研究論文(学術雑誌)
  • Bold Approach in Finite Element Simulation on Minimum Quantity Lubrication Effect during Machining Ainur Munira Rosli, Ahmad Shahir Jamaludin, Mohd Nizar Mhd Razali, Hosokawa Akira, Tatsuaki Furumoto, Mohd Shahril Osman Journal of Modern Manufacturing Systems and Technology 2巻 33-41頁 2019/03/15 査読有 原著論文 研究論文(学術雑誌)
  • 電解加工を用いた一括表面テクスチャリングにおけるテクスチャの微細化 小谷野智広,高橋克成,細川晃,古本達明,橋本洋平 電気加工学会誌 56巻 141号 52-60頁 2022/05/24 査読有 原著論文 研究論文(学術雑誌)
  • PBF-LBM用工具鋼粉末の粉末床品質に及ぼす粉末せん断特性の影響 山田慎之介,山口貢,古本達明 製密工学会誌 88巻 10号 795-800頁 2022/10/01 査読有 原著論文 研究論文(学術雑誌)
  • Finishing speed improvement using side cover plates in gyro finishing Y. Hashimjoto, Y. Nakayama, T. Furumoto, A. Sekiya T. Yamada, T. Kawahara, A. Hosokawa International Journal of Automation Technology 17巻 1号 47-54頁 2023/01 査読有 原著論文 研究論文(学術雑誌)
  • Novel method to visualize Preston's coefficient distribution for chemical mechanical polishing process Y, Hashimoto, T. Furumoto, T. Sato, N. Suzuki, H. Yasuda, S. Yamaki, Y. Mochizuki Japanese Journal of Applied Physics 61巻 116502頁 2022/10 査読有 原著論文 研究論文(学術雑誌)
  • Humidity control in laser powder bed fusion using titanium alloy powder for quality assurance of built parts and reusability of metal powder M. Yamaguchi, K. Kushima, Y. Ono, T. Sugai, T. Oyama, T. Furumoto Journal of Materials Processing Technology 311巻 117817頁 2023/01 査読有 原著論文 研究論文(学術雑誌)
  • Experimental Investigation of Spatter Particle Behavior and Improvement of Build Part Quality in PBF-LB  M. Yoshida, T. Furumoto, K. Sakuma, K. Kawasaki, K. Itagaki International Journal of Automation Technology 17巻 4号 345-355頁 2023/07/05 査読有 原著論文 研究論文(学術雑誌)
  • Influence of oxygen concentration in building environment and oxidation extent of maraging steel on spatter generation behavior in powder bed fusion M. Yamaguchi, K. Tsubouchi, S. Yamada, K. Sugiyama, T. Furumoto International Journal of Automation Technology 17巻 4号 346-355頁 2023/07/05 査読有 原著論文 研究論文(学術雑誌)
  • Improvement of Machining Accuracy by Controlling the Pulse Voltage On-time in Electrochemical Milling with High-speed Scanning T. Koyano, S. Notate, T. Furumoto, A. Hosokawa International Journal of Electrical Machining 28巻 7-12頁 2023/03 査読有 原著論文 研究論文(学術雑誌)
  • Analytical Investigation of the Influence of Machining Area in Electrochemical Machining with Short Voltage Pulses T. Koyano, Y. Shibuya, T. Furumoto, A. Hosokawa International Journal of Electrical Machining 28巻 13-19頁 2023/03 査読有 原著論文 研究論文(学術雑誌)
  • Study on laser scanning strategy for correction of anisotropic residual stress distribution and reduction of warpage in structures fabricated by PBF-LB/M A. Ezura, S. Abe, T. Furumoto, T. Sasaki, J. Sakamoto International Journal of Automation Technology 17巻 4号 369-377頁 2023/07/05 査読有 原著論文 研究論文(学術雑誌)
  • 微小管付与による離型剤浸透金型の製作とダイカスト鋳造特性 堀裕生,古本達明,千葉洋尚,加藤直紀,山口貢,新川真人 精密工学会誌 89巻 10号 790-794頁 2023/10/01 査読有 原著論文 研究論文(学術雑誌)
  • PBF-LB/M用金属粉末の粒度分布の違いが粉末床と造形特性に及ぼす影響 東直哉,古本達明,山口貢,牛晶,桑原孝介 精密工学会誌 90巻 1号 126-131頁 2024/01 査読有 原著論文 研究論文(学術雑誌)
  • Finishing characteristics with free abrasive grains and cooling performance of internal channels with different cross-sectional geometries M. Yamaguchi, K. Kushima, S. Inagaki, M. Tsuji, T. Furumoto International Journal of Automation Technology 18巻 2号 216-224頁 2024/03 査読有 原著論文 研究論文(学術雑誌)
  • Cut-off characteristics of CBN and diamond stick stone with pulse YAG laser –Laser cutting of super abrasive stone 古本達明,上田隆司,他2名 LPM2004 5662頁 2004/05 査読有 原著論文 研究論文(プロシーディング)
  • Tip Processing of Quartz Optical Fiber for Dental Treatment with TiO2 Powder -Irradiation Characteristics of TiO2-processed(TP) Fiber 古本達明,上田隆司,他6名 Online Proceedings of LAMP2006 6巻 25頁 2006/05 査読有 原著論文 研究論文(プロシーディング)
  • Minimum Quantity Lubrication Turning of Ferrous Metals - Measurement of tool temperature using fibercoupled two-color pyrometer - 細川晃,古本達明,他3名 LEM21 07巻 205号 339-342頁 2007/11 査読有 原著論文 研究論文(プロシーディング)
  • Study on Laser Consolidation of Metal Powder with Yb fiber laser -Temperature Measurement of Laser Irradiation Spot- 古本達明,上田隆司,他4名 Proc. of LPM2008 2008/06 査読有 原著論文 研究論文(プロシーディング)
  • Minimum Quantity Lubrication Turning Using Tools with oil Holes 細川晃,古本達明,他3名 Proc. of 2008 ASPE/ICPE meeting 221-224頁 2008/10 査読有 原著論文 研究論文(プロシーディング)
  • Improvement of Chip Controllability of Carbon Steel in Turning by Laser Heat 田中隆太郎,古本達明,他4名 Proc. of 2008 ASPE/ICPE meeting 229-232頁 2008/10 査読有 原著論文 研究論文(プロシーディング)
  • Cutting Tool Edge Temperature in Finish Hard Turning of Case Hardened Steel 田中隆太郎,古本達明,他4名 ICPMT2009 (Progress of Machining Technology) 538-541頁 2009/04 査読有 原著論文 研究論文(プロシーディング)
  • Prevention of Burr Formation in Face Milling of Carbon Steel by Laser Hardening 田中隆太郎,古本達明,他3名 Proc. of ICPMT2009 672-675頁 2009/04 査読有 原著論文 研究論文(プロシーディング)
  • Influence of On-the-machine Laser Hardening on Machinability of Carbon Steel in Turning 田中隆太郎,古本達明,他4名 Proc. of ICPMT2009 690-693頁 2009/04 査読有 原著論文 研究論文(プロシーディング)
  • Study on Laser Assisted Milling of Ferrous Based Consolidated Material 古本達明,上田隆司,他4名 Proc. of ICMDT 47頁 2009/06 査読有 原著論文 研究論文(プロシーディング)
  • Study on Wear Mechanism in Milling Sintered Material A. YASSIN,上田隆司,古本達明,他3名 Proc. of ICMDT 46頁 2009/06 査読有 原著論文 研究論文(プロシーディング)
  • Study on Measurement of Impulse Force Induced by Nd:YAG Laser Beam 古本達明,上田隆司,他5名 Proc. of LAMP2009 327頁 2009/06 査読有 原著論文 研究論文(プロシーディング)
  • Study on Mechanism of Bactericidal Effect Induced by Nd:YAG Laser, Irradiation, Variation of Impulse Stress with Absorbent 上田隆司,他5名 Proc. of ICMT2009 33頁 2009/10 査読有 原著論文 研究論文(プロシーディング)
  • Laser Sintering Characteristics of Metallic Powder with Yb Fiber Laser, Optimization of Processing Conditions about Laser irradiation 小林直人,古本達明,他3名 Proc. of LEM21 593-596頁 2009/12 査読有 原著論文 研究論文(プロシーディング)
  • Finishing of Inner Wall of Cooling Channel in Mold by High Speed Flowing 加納康弘,古本達明,他4名 Proc. of LEM21 401-404頁 2009/12 査読有 原著論文 研究論文(プロシーディング)
  • Study on Cleaving Mechanism of Silicon Wafer By Laser Beam Irradiation 武田怜子,古本達明,他3名 Proc. of LEM21 589292頁 2009/12 査読有 原著論文 研究論文(プロシーディング)
  • Study on Reduction of Residual Stress Induced in Rapid Tooling Process, Influence of Heating Conditions on Residual Stress 古本達明,上田隆司,他3名 Proc. of ICPE2010 49-50頁 2010/07 査読有 原著論文 研究論文(プロシーディング)
  • Study on Optimization of Cnsolidation Conditions by the Monitoring ofCutting Force, Application to Rapid Tooling Processes  古本達明,上田隆司,他3名 Proc. of ISFA 50頁 2010/07 査読有 原著論文 研究論文(プロシーディング)
  • Study on Inner Face Polishing of Cooling Channel within Molding Die with Flowing Slurry, Polishing Characteristics of Cooling Channel Obtained by Layered Manufacturing Process 古本達明,上田隆司,他3名 Proc. of CIRP HPC 389-392頁 2010/10 査読有 原著論文 研究論文(プロシーディング)
  • Measurement of Dynamic Stress Generated in TiO2 Solution, Induced by Nd:YAG Laser Beam Irradiation 葛西惇士,古本達明,他5名 Proc. of ICMT2010 337-341頁 2010/11 査読有 原著論文 研究論文(プロシーディング)
  • Study on temperature measurement during Er:YAG laser irradiation with two-color pyrometer 古本達明,上田隆司,他3名 Proc. of WFLD-ED2010 2011/06 査読有 原著論文 研究論文(プロシーディング)
  • Combined Effect of Nd:YAG laser and TiO₂ on Bactericidal Action 和賀正明,古本達明,上田隆司 Proc. of  WFLD-ED 2011/06 査読有 原著論文 研究論文(プロシーディング)
  • Internal Finishing of Cooling Channel in Molding Die with Free Abrasive Grains, Influence of Face Protuberance on Finishing Performance Proc. of ASPEN2011 CD-ROM巻 2011/11 査読有 原著論文 研究論文(プロシーディング)
  • Study on Temperature Measurement of Human Enamel by Er:YAG Laser Irradiation-The Influence of Surface Temperature on the Dental Pulp Proc. of LEM21 CD-ROM, No.3361巻 2011/11 査読有 原著論文 研究論文(プロシーディング)
  • Study on Aircraft Materials with Laser-aided Proc. of LEM21 CD-ROM, No.3305巻 2011/11 査読有 原著論文 研究論文(プロシーディング)
  • Development of Tool Edge Temperature Measurement Method in Wet Cutting,Application for CBN and Poly Crystalline Diamond Tools  Proc. of LEM21 CD-ROM, No.3367巻 2011/11 査読有 原著論文 研究論文(プロシーディング)
  • Tool Edge Temperature of Spiral Tap at Tapping, Grasp of Cutting Behavior and Measurement of Tool Edge Temperature by Two-color Pyrometer Proc. of LEM21 CD-ROM, No.3304巻 2011/11 査読有 原著論文 研究論文(プロシーディング)
  • Tool Edge Temperature in Tapping of Stainless Steel Proc. of ICPMT2012 109-112頁 2012/09 査読有 原著論文 研究論文(プロシーディング)
  • Study on Machinability of Laser Sintered Materials Fabricated by Layered Manufacturing System, Influence of Hardness on Cutting Temperature  Procedia CIRP 4巻 79-83頁 2012/10 査読有 原著論文
  • Monitoring of Laser Consolidation Process of Metal Powder with High Speed Video Camera  Physics Procedia 39巻 760-766頁 2012/10 査読有 原著論文 研究論文(プロシーディング)
  • Study on Measurement of Laser Induced Dynamic Stress in the Suspension, The Influences of Powder Materials on Induced Dynamic Stress  Procedia CIRP 5巻 74-78頁 2013/01 査読有 原著論文 研究論文(プロシーディング)
  • Consolidation Characteristics of SCM Based Metal Powder M. R. Alkahari, T. Furumoto, et al. Proc. of ICMDT2013 2013/05 査読有 原著論文 研究論文(プロシーディング)
  • Development of Permeability Measurement System of Porous Structure Obtained by Additive Manufacturing Proc. of ICMT2013 110-113頁 2013/10 査読有 原著論文 研究論文(プロシーディング)
  • Internal finishing of cooling channel within molding die obtained by additive manufacturing D. Kusunoki, T. Furumoto, et al. Proc. of LEM21 59-62頁 2013/11 査読有 原著論文 研究論文(プロシーディング)
  • Formation of re-solidified layer on the surface of dental hard tissue by Er:YAG laser irradiation T. Hayashi, T. Furumoto, et al. Proc. of LEM21 63-66頁 2013/11 査読有 原著論文 研究論文(プロシーディング)
  • Thermal Dressing of Metal Bonded Diamond Wheel by Nd:YAG Laser, Optimization of Air-jet Irradiation Angle S. Tamaki, A. Hosokawa, et al. Proc. of LEM21 75-78頁 2013/11 査読有 原著論文 研究論文(プロシーディング)
  • The Temperature Measurement of Human Enamel Surface during CO2 Laser Beam Irradiation, The Comparison of removal Characteristic in Laser Wavelength Proc. of ICPE2014 275-278頁 2014/07 査読有 原著論文 研究論文(プロシーディング)
  • Study on Reduction of Deformation of Consolidated Structure by Layered Manufacturing System, Optimization of Laser Scanning Method 74-77頁 2014/07 査読有 原著論文 研究論文(プロシーディング)
  • Wear Behavior of Diamond-coated End Mill in Cutting of Cemented Carbide A. Yoshida, M. Okada, T. Furumoto, et al. 625-626頁 2014/07 査読有 原著論文 研究論文(プロシーディング)
  • Studies on Reduction of Grinding Fluid in Cylindrical Plunge Grinding 617-620頁 2014/07 査読有 原著論文 研究論文(プロシーディング)
  • Internal Face Finishing Performance of Cooling Channel with Face Protuberance within Molding Die 83-86頁 2014/07 査読有 原著論文 研究論文(プロシーディング)
  • Studies on Effective Parameters for FEM Analysis of MQL Cutting A. S. Jamaludin, A. Hosokawa, T. Furumoto, T. Koyano Proc. of iDECON2015 23-32頁 2015/09 査読有 原著論文 研究論文(プロシーディング)
  • Cutting performance of CBN and diamond tools in dry turning of cemented carbide A. M. N. A. Kamaruddin, A. Hosokawa, T. Ueda, T. Furumoto, T. Koyano Proc. of LEM21 No.0508頁 2015/10 査読有 原著論文 研究論文(プロシーディング)
  • Miniaturization of micro EDM using high electric resistance electrode Y. Sugata, T. Koyano, A. Hosokawa, T. Furumoto Proc. of LEM21 No.1105頁 2015/10 査読有 原著論文 研究論文(プロシーディング)
  • Study on the Effect of External Hydrostatic Pressure on Electrical Discharge Machining T. Koyano, S. Suzuki, A. Hosokawa, T. Furumoto  Procedia CIRP 42巻 46-50頁 2016/04 査読有 原著論文 研究論文(プロシーディング)
  • Study on Thermal Stress Cleavage of Chemically Strengthened Glass by CO2 Laser Beam H. Ogi, T. Furumoto, T. Koyano, A. Hosokawa Procedia CIRP 42巻 460-463頁 2016/04 査読有 原著論文 研究論文(プロシーディング)
  • Study on High Quality Laser Cleavage of Chemically Strengthened Glass H. Ogi, T. Furumoto, T. Koyano, A. Hosokawa Proc. of IC3MT2016 41頁 2016/11 査読有 原著論文 研究論文(プロシーディング)
  • Electrochemical Machining with Porous Electrode Fabricated by Additive Manufacturing R. Igusa, Tomohiro Koyano, T. Furumoto, A. Hosokawa, Y. Hashimoto Proc. of ICPE2016 B107-8174頁 2016/10 査読有 原著論文 研究論文(プロシーディング)
  • Study on High Efficiency Cutting of SiC-based Ceramic Matrix Composites, Application of Diamond Coated Carbide End Mill T. Tanabe, T. Furumoto, S. Mori, Y. Hashimoto, T. Koyano, A. Hosokawa, M. Yano Proc. of ICPE2016 P43-8194頁 2016/10 査読有 原著論文 研究論文(プロシーディング)
  • Machining of Difficult-to-Machine Materials by PVD Coated End Mills, Application of high smooth coated film deposited by filtered arc deposition (FAD) method G. Hoshino, Tetsuo Fujimoto, A. Hosokawa, T. Furumoto, T. Koyano Proc. of ICPE2016 A210-8136頁 2016/10 査読有 原著論文 研究論文(プロシーディング)
  • Study on formation mechanism of pores inside built structure by metal-based additive manufacturing K. Egashira, T. Furumoto, et al. Proc. of ISAAT2017 R304頁 2017/12 原著論文 研究論文(プロシーディング)
  • Thermophysical properties of SKD61 powder for additive manufacturing, Measurement of thermal conductivity and laser absorption Y. Tanabe, T. Furumoto, et al. Proceedings of the 9th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2017 100頁 2017/11/13 査読有 原著論文 研究論文(プロシーディング)
  • Investigation of friction coefficient between wafer and carrier during double-sided lapping Y. Hashimoto, T. Sano, T. Furumoto, et al. Proceedings of the 9th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2017 124頁 2017/11/13 査読有 原著論文 研究論文(プロシーディング)
  • Analytical investigation of workpiece attitude during double-sided polishing Y. Hashimoto, T. Sano, T. Furumoto, et al. Proceedings of the 9th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2017 147頁 2017/11/13 査読有 原著論文 研究論文(プロシーディング)
  • Hard turning of difficult-to-machine materials with actively driven rotary tool (ADRT)-proposition of reciprocating turning based on the fundamental cutting characteristics A. Hosokawa, H. Yoshimatsu, T. Koyano, T. Furumoto, et al. Proceedings of the 9th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2017 053頁 2017/11/13 査読有 原著論文 研究論文(プロシーディング)
  • Analysis of electrochemical machining process with ultrashort pulses considering stray inductance of pulse power supply T. Koyano, A. Hosokawa, T. Furumoto, Y. Hashimoto Proceedings of the 9th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2017 148頁 2017/11/13 査読有 原著論文 研究論文(プロシーディング)
  • Formation of pores inside the built structure obtained by metal-based powder bed fusion process T. Furumoto, et al. Proc. of ICMT2017 2017/10/21 査読有 原著論文 研究論文(プロシーディング)
  • Study on the effectiveness of Extreme Cold Mist MQL system on turning process of stainless steel AISI 316 A. S. Jamaludin, A. Hosokawa, T. Furumoto, T. Koyano, Y. Hashimoto Materials Science and Engineering 319巻 012054頁 2018/01 査読有 原著論文 研究論文(プロシーディング)
  • Temperature Measurement of Wire Electrode in Wire EDM by Two-color Pyrometer  T. Koyano, A. Hosokawa, T. Furumoto, Y. Hashimoto Procedia CIRP 68巻 96-99頁 2018/04 査読有 原著論文 研究論文(プロシーディング)
  • Study on laser cleavage of thick sapphire wafer with CO2 laser beam, Reduction of waviness in cleavage surface T. Kawabe, T. Furumoto, et al. Proc. of ISFA2018 S049頁 2018/07 査読有 原著論文 研究論文(プロシーディング)
  • Properties of structure with negative poisson's ratio built by metal powder bed fusion additive manufacturing S. Matsuura, T. Furumoto, et al. Proc. of ISFA2018 S048頁 2018/07 査読有 原著論文 研究論文(プロシーディング)
  • Microstructure of built part obtained by powder bed fusion process with metal T. Furumoto, et al. Proc. of IC3MT2018 2367頁 2018/09 査読有 原著論文 研究論文(プロシーディング)
  • Study on high quality thermal stress cleavage of thick sapphire wafer T. Kawabe, T. Furumoto, et al. Proc. of IC3MT2018 2367頁 2018/09 査読有 原著論文 研究論文(プロシーディング)
  • High-quality machining of CFRP with dDLC-coated and diamond-coated end mills S. Tanaka, A. Hosokawa, G. Hoshino, T. Koyano, T. Furumoto, Y. Hashimoto Proc. of IC3MT2018 2356頁 2018/09 査読有 原著論文 研究論文(プロシーディング)
  • Turning of Difficult-to-machine Materials with High Pressure Coolant A. Hosokawa, Y. Nomura, T. Koyano, T. Furumoto, Y. Hashimoto Proc. of ICPE2018 B-1-12頁 2018/11 査読有 原著論文 研究論文(プロシーディング)
  • Study on Removal Characteristics of Soft Tissue by Er:YAG Laser Irradiation H. Okudomi, T. Furumoto, et al. Proc. of ICPE2018 G-1-4頁 2018/11 査読有 原著論文 研究論文(プロシーディング)
  • Micro Texturing by Electrochemical Machining with Short Voltage Pulses  T. Takahashi, T. Koyano, A. Hosokawa, T. Furumoto, Y. Hashimoto Proc. of ICPE2018 B-5-12頁 2018/11 査読有 原著論文 研究論文(プロシーディング)
  • Electrical Discharge Machining of Micro-rods Using High Electric Resistance Electrodes and Piezoelectric Positioning Stage R. Hayashi, T. Koyano, A. Hosokawa, T. Furumoto, Y. Hashimoto Proc. of ICPE2018 B-5-19頁 2018/11 査読有 原著論文 研究論文(プロシーディング)
  • Permeability of Release Agent inside the Porous Structure Built by Metal-based Additive Manufacturing T. Furumoto, et al. Proc. of ICMDT2019 FR-D-2-1頁 2019/04 査読有 原著論文 研究論文(プロシーディング)
  • Relashionship between spatter particle behavior and volume specific energy density in SLM process K. Oishi, T. Furumoto, et al. Proc. of ICMDT2019 FR-D-2-2頁 2019/04 査読有 原著論文 研究論文(プロシーディング)
  • Surface Texturing of Tungsten Carbide Cutting Tools by Electrochemical Machining T. Koyano, M. Takabatake, A. Hosokawa, T. Furumoto, Y. Hashimoto Proc. of ASPEN2019 B31頁 2019/11 査読有 原著論文 研究論文(プロシーディング)
  • Investigation on force acting on workpiece with respect to actual amount of abrasive media on the workpiece in dry gyro barrel finishing Y. Hashimoto, T. Ito, Y. Nakayama, T. Furumoto, et al. Proc. of ASPEN2019 A07頁 2019/11 査読有 原著論文 研究論文(プロシーディング)
  • Study on material property of dental hard tissue:Evaluation of non-carious lesion H. Ohura, T. Furumoto, et al. Proc. of ASPEN2019 P05頁 2019/11 査読有 原著論文 研究論文(プロシーディング)
  • Investigation of Contact Force between Cylindrical Workpiece and Abrasive Media in Gyro Finishing Process T. Ito, Y. Hashimoto, Y. Nakayama, T. Furumoto, et al.  Proc. of ISAAT2019 2019/12 査読有 原著論文 研究論文(プロシーディング)
  • Mechanical and Tribological Characteristics of VN and VN/AlCrN Multilayer PVD Coating Films for Cutting Tools R. Saito, A. Hosokawa, T. Koyano, T. Furumoto, Y. Hashimoto Proc. of ISAAT2019 2019/12 査読有 原著論文 研究論文(プロシーディング)
  • Experimental Investigation Into the Spatter Particle Behaviour of Maraging Steel During Selective Laser Melting  T. Furumoto, K. Egashira, K. Oishi, S. Abe, M. Yamaguchi, Y. Hashimoto, T. Koyano, A. Hosokawa Proc. of LEMP2020 2020/06 査読有 原著論文 研究論文(プロシーディング)
  • Investigation of Orthogonal Turn-Milling for Higher Machining Efficiency and Accuracy: Relationship Between Material Removal Rate and Measured Tool Flank Temperature K. Shimanuki, A. Hosokawa, T. Koyano, T. Furumoto, Y. Hashimoto Proc. of LEMP2020 2020/06 原著論文 研究論文(プロシーディング)
  • Experimental investigation of torques acting on upper and lower platens in double-sided lapping R. Ozaki, Y. Hashimoto, H. Hashimoto, T. Furumoto, T. Koyano, A. Hosokawa Proc. of ICPE2020 116-117頁 2020/11 査読有 原著論文 研究論文(プロシーディング)
  • Influence of laser power on spatter particle generation in Powder Bed Fusion process K. Oishi, T. Furumoto, S. Abe, Y. Hashimoto, T. Koyano, A. Hosokawa Proc. of ICPE2020 148-149頁 2020/11 査読有 原著論文 研究論文(プロシーディング)
  • Improvement of processing time by utilizing cover plate in gyro barrel finishing Y. Nakayama, Y. Hashimoto, T. Ito, T. Furumoto, T. Koyano, A. Hosokawa Proc. of ICPE2020 124-125頁 2020/11 査読有 原著論文 研究論文(プロシーディング)
  • Turning of Difficult-to-machine Materials with High Pressure Coolant A. Hosokawa, K. Kuwabara, K. Kosugi, T. Koyano, T. Furumoro, Y. Hashimoto Proc. of ICPE2020 399-400頁 2020/11 査読有 原著論文 研究論文(プロシーディング)
  • Laser scan strategy for isotropic residual stress distribution and reduction of warpage in powder bed fusion A. Ezura, S. Abe, T. Furumoto, et al. Proc. of the 16th CHINA-JAPAN International Conference on Ultra-Precision Machining Process (CJUMP) 2021/11 査読有 原著論文 研究論文(プロシーディング)
  • Study on finishing characteristics with free abrasive grains and cooling performance of channels with various cross-sectional shapes K. Kushima, T. Furumoto, et al. Proc. of LEM21 2021/11 査読有 原著論文 研究論文(プロシーディング)
  • Melt pool behaviour during laser powder bed fusion process, Influence of laser incident angle on the scattering of spatter particles K. Tsubouchi, T. Furumoto, et al. Proc. of LEM21 2021/11 査読有 原著論文 研究論文(プロシーディング)
  • Improvement of Finishing Speed by Using Side Cover Plates in Gyro Finishing Y. Nakayama, Y. Hashimoto, T. Furumoto, et al. Proc. of ISAAT2021 2021/11 査読有 原著論文 研究論文(プロシーディング)
  • Observation of slurry behavior between workpiece and upper platen in Double-sided Lapping T. Sasaki, Y. Hashimoto, T. Furumoto, et al. Proc. of ISAAT2021 2021/11 査読有 原著論文 研究論文(プロシーディング)
  • Overhang shape in metal addition manufacturing of molds with topology-optimized cooling channels A. Ezura, H. Suzuki, S. Abe, T. Furumoto, J. Sakamoto Proc. of ACSMO2022 2022/04 査読有 原著論文 研究論文(プロシーディング)
  • Development of multi-layer PVD coating film with high-temperature lubricity and heat resistance and their application to cutting tools A. Hosokawa, T. Uno, T. Koyano, T. Furumoto, Y. Hashimoto Proc. of ICPE2022 C277頁 2022/11/30 査読有 原著論文 研究論文(プロシーディング)
  • Temperature Measurement of Wire Electrode during Wire Electrical Discharge Machining Using Two-color Pyrometer with Optical Fiber T. Hinata, T. Koyano, A. Hosokawa, T. Furumoto, Y. Hashimoto, M. Yamaguchi, S. Abe Proc. of ICPE2022 C264頁 2022/11/30 査読有 原著論文 研究論文(プロシーディング)
  • Effects of Voltage Pulse Conditions on Electrochemical Machining of Cemented Carbide Proc. of ICPE2022 C271頁 2022/11/30 査読有 原著論文 研究論文(プロシーディング)
  • Effect of laser wet remelting on surface roughness and tribology behavior of maraging steel built by powder bed fusion A. Ezura, S. Abe, T. Furumoto, J. Sakamoto Proc. of ICPE2022 C130頁 2022/11/30 査読有 原著論文 研究論文(プロシーディング)
  • Effective removal of support structures constructed by PBF process using gyro finishing K. Yamaya, Y. Hashimoto, T. Furumoto, M. Yamaguchi, T. Koyano, A. Ezura, A. Hosokawa Proc. of ICPE2022 C140頁 2022/11/30 査読有 原著論文 研究論文(プロシーディング)
  • Novel drag finishing machine for less variation in finishing speed A. Kutsuna, Y. Hashimoto, T. Furumoto, M. Yamaguchi, T. Koyano, A. Ezura, T. Kawahara, A. Sekiya, A. Hosokawa Proc. of ICPE2022 C149頁 2022/11/30 査読有 原著論文 研究論文(プロシーディング)
  • The effect of oxygen in the shielding gas on building properties for laser powder bed fusion of aluminum alloy K. Kushima, T. Furumoto, Y. Ono, T. Oyama Proc. of ICMDT2023 28頁 2023/03/08 査読有 原著論文 研究論文(プロシーディング)
  • Simulation of wire electrode temperature in wire electrical discharge machining based on temperature measurement resulted byteo-color pyrometer with optical fiber T. Hinata, T. Koyano, T. Furumoto, Y. Hashimoto, M. Yamaguchi Proc. of ASPEN2023 28頁 2023/11 査読有 原著論文 研究論文(プロシーディング)
  • Multiphysics Simulation of Micro Electrochemical Machining Including Circuit Analysis of Pulse Power Supply T. Koyano, T. Furumoto Proc.of ASPEN2023 95頁 2023/11 査読有 原著論文 研究論文(プロシーディング)
  • Droplet control for development of spatterless building technology in powder bed fusion S. Kajimoto, T. Furumoto, S. Abe, M. Yamaguchi, Y. Hashimoto, T. Koyano Proc. of ISAAT2023 115頁 2023/11 査読有 原著論文 研究論文(プロシーディング)
  • レーザによる歯の治療 上田隆司,山田啓司,杉田忠彰,古本達明 先端加工学会誌 16巻 1号 22-24頁 1997/01 査読無 解説 その他
  • 電動車いすの軽量化設計 中藪敏博,高橋哲郎,前川満良,古本達明,吉田博幸 機械の研究 53巻 1号 163-168頁 2001/01 査読無 解説 その他
  • セラミックスの3次元微細加工技術 坂谷勝明,舟田義則,古本達明 セラミックス 39巻 12号 994-997頁 2004/12 査読無 解説 その他
  • 微粒超砥粒砥石のレーザ切断 古本達明,上田隆司 砥粒加工学会誌 49巻 4号 24-27頁 2005/04 査読無 解説 その他
  • Nd:YAGレーザによる先進レーザ歯科治療 上田隆司,古本達明 レーザ加工学会誌 15巻 1号 22-28頁 2008/01 査読無 解説 その他
  • レーザ光を用いた金属粉末の焼結技術 ―ラピッドツーリングによる高精度金型の製作に向けて― 古本達明,上田隆司 光アライアンス 20巻 5号 5-8頁 2009/05 査読無 解説 その他
  • レーザ光を用いたハイブリッド歯科治療,レーザ治療の安全で効率的な臨床応用に向けて 古本達明,上田隆司 光アライアンス 20巻 7号 11-15頁 2009/07 査読無 解説 その他
  • 遊離砥粒を用いた金型水管内面のクリーニング 古本達明,上田隆司,加納康弘 型技術ワークショップ2009 in 金沢講演論文集 44-45頁 2009/12 査読無 解説 その他
  • 2波長レーザを用いたガラス板材の精密割断 古本達明 財団法人天田金属加工機械技術振興財団・研究概要報告書 23巻 175-179頁 2011/03 査読無 解説 その他
  • 金属光造形用粉末のレーザ焼結特性に関する研究,ファイバ導光型2色温度計によるレーザ照射部の温度測定 古本達明,上田隆司,阿部諭 型技術 26巻 7号 82-83頁 2011/06 査読無 解説 その他
  • 遊離砥粒を用いた金型水管内面のクリーニング(第2報) ―表面突起付加による研磨効率の改善― 古本達明,上田隆司,阿部諭 型技術ワークショップ2011 in 岐阜講演論文集 102-103頁 2011/11 査読無 解説 その他
  • 遊離砥粒を用いたダイカスト金型冷却穴の表面改質 古本達明,上田隆司,楠大樹,落合良基,辻正雄,稲垣秀治 2014日本ダイカスト会 25-29頁 2014/11 査読無 解説 その他
  • 積層造形で得られた金型の高精度化に向けて 古本達明 北陸経済研究 427巻 52-53頁 2014/11 査読無 解説 その他
  • 金属粉末積層造形で得られた金型の高機能化 古本達明 計測と制御 54巻 6号 405-411頁 2015/06 査読無 解説 その他
  • 金属AMを用いた金型製作の現状と展望 古本達明 機械技術 64巻 1号 66-71頁 2016/01 査読無 解説 その他
  • 遊離砥粒を用いたダイカスト金型用冷却穴の表面改質,スポット冷却水管の評価 古本達明,落合良基,辻正雄,稲垣秀治 2016日本ダイカスト会議論文集 29-34頁 2016/11 査読無 解説 その他
  • Additive Manufacturingによる金型製作 古本達明 機械の研究 69巻 2号 114-118頁 2017/02 査読無 解説 その他
  • レーザ照射による歯質除去と殺菌効果発現 古本達明,他 砥粒加工学会誌 61巻 4号 191-194頁 2017/04/01 査読無 解説 その他
  • 積層造形を活用した金型製作 古本達明 塑性と加工 58巻 675号 273-277頁 2017/04/27 査読無 解説 その他
  • 遊離砥粒を用いたダイカスト金型用冷却穴の表面加工 古本達明 型技術 32巻 6号 40-43頁 2017/05/01 査読無 解説 その他
  • 金属AMを用いた金型製作の現状と課題 古本達明 成形加工 29巻 9号 316-319頁 2017/08/20 査読無 解説 その他
  • 海外展示会レポート EMO Hannover 2017にみる金属AMの動向 古本達明 機械と工具 7巻 12号 72-75頁 2017/12/10 査読無 解説 その他
  • 内部配置水管の表面加工による3Dプリンタ製金型の高精度化 古本達明 プラスチックス 68巻 12号 28-31頁 2017/12/10 査読無 解説 その他
  • 金属Additive Manufacturingで製作した金型内部水管の表面加工 古本達明 ケミカルエンジニヤリング 63巻 6号 25-30頁 2018/06 査読無 解説 研究論文(大学・研究所等紀要)
  • 金属Additive Manufacturingで製作した金型の高精度化に向けた内部配置水管の表面加工 古本達明 機械技術 66巻 10号 29-32頁 2018/10 査読無 解説 研究論文(大学・研究所等紀要)
  • 金属AM製金型内部水管の表面加工 古本達明 油空圧技術 58巻 1号 37-40頁 2019/01 査読無 解説 研究論文(大学・研究所等紀要)
  • レーザを用いた硬脆材料の熱応力割断 古本達明 素形材 60巻 6号 16-21頁 2019/06 査読無 解説 その他
  • レーザ照射部の可視化による粉末溶融・凝固現象の解明 古本達明,阿部諭,山口貢 ぷらすとす 3巻 34号 12-16頁 2020/10 査読無 解説 その他
  • レーザ照射部の可視化による粉末溶融・凝固現象の解明 古本達明,阿部諭,山口貢 電気加工技術 44巻 137号 11-17頁 2021/01 査読無 解説 学位論文(その他)
  • 金属を用いた粉末床溶融結合時の溶融池温度測定 古本達明 型技術 37巻 6号 22-25頁 2022/05/01 査読無 解説 その他
  • レーザーを用いる粉末床溶融結合法の造形現象 古本達明 機械技術 2023/09/01 査読無 解説 その他
  • cosα法を用いた金属積層体の異方的な残留応力分布測定 江面篤志,阿部諭,古本達明,坂本二郎,佐々木敏彦 非破壊検査 73巻 1号 10-14頁 2024/01 査読無 解説 研究論文(その他学術会議資料等)
  • 金属付加製造法を用いた離型材浸透金型の製作とダイカスト鋳造特性 古本達明,堀裕生,新川真人 砥粒加工学会誌 2024/03 解説 その他

講演・口頭発表等

  • レーザによる歯科治療に関する研究,TPファイバ成形のためのレーザ条件最適化(会議名:歯科レーザ予防臨床アカデミー)(2008)
  • レーザによる超砥粒砥石の高精度加工技術の開発(会議名:産学官テクノインダストリ・スクエア金沢)(2007)
  • Study on Laser Assisted Milling of Consolidated Structure with the Layered Manufacturing Process(会議名:The 33rd Rapid Prototyping Symposium in Japan)(2009)
  • 汎用レーザによる表面周期構造の創成と気体軸受への応用(会議名:レーザ高度利用技術研究会)(2010/02)
  • 高機能金型の製作に向けたアプローチ, レーザアシスト加工と遊離砥粒による水管内面加工 (会議名:最新金型技術講演会)(2010/10)

全て表示

  • レーザー照射時に生じる誘起衝撃応力の測定および酸化チタン乳液内部に生じる応力測定(会議名:歯科レーザー予防臨床アカデミー)(2011/07)
  • 歯科分野への工学からのアプローチ(会議名:精密工学会 アフィリエイト研究会)(2011/12)
  • 歯科分野への工学からのアプローチ(会議名:歯科臨床研鑽会)
  • 歯科分野におけるレーザ利用の現状(会議名:精密工学会2013年度春季大会学術講演会)(2013)
  • Study on Milling-combined Laser Consolidation System, For the Advanced Injection Mold by Additive Manufacturing(会議名:ISUPEN2013)(2013)
  • 積層造形による高機能金型の製作に向けたアプローチ(会議名:最新加工技術に関する研究会)(2013/08)
  • 金属系積層造形の現状と課題(会議名:燕三条地場産業振興センター 平成25年度新技術・新材料研究会)(2013/11)
  • 金属粉末積層造形で得られた金型の高機能化に向けたアプローチ(会議名:電子ジャーナル 第2148回テクニカルセミナー)(2014/03)
  • 金属粉末積層造形で得られた金型の高機能化に向けて(会議名:型技術協会 第117回型技術セミナー)(2014/10)
  • 金属粉末積層造形の金型への応用 (会議名:精密工学会 第373回講習会)(2015/06)
  • 金属Additive Manufacturingの金型応用(会議名:精密工学会 第26回アフィリエイト委員会)(2015/12)
  • 金属レーザ焼結の基礎的研究と将来展望(会議名:プラスチック工業技術研究会 技術講演会)(2016/09)
  • 遊離砥粒を用いた金型内部水管の表面加工(会議名:日本鋳造工学会 東海支部岐阜地区「鋳物技術講演会」)(2016/09)
  • 粉末床溶融結合法で得られた金型の高機能化(会議名:粉体粉末冶金協会 平成28年度秋季大会(第118回講演大会))(2016/11/11)
  • 遊離砥粒を用いたダイカスト金型用冷却穴の表面改質 (会議名:型寿命評価研究委員会 平成28年度第3回研究会)(2016/12/07)
  • レーザによる各種ウエハの熱応力割断(会議名:公益財団法人天田財団 北陸産学交流会)(2017/02/18)
  • レーザ照射による歯質除去と殺菌効果発現(会議名:第5回金沢バイオエンジニアリング・コンポジット研究会)(2017/03/20)
  • 金属AMを用いた金型製作の現状と課題(会議名:金沢大学理工研究域 先端製造技術開発推進センター平成29年度第1回ワークショップ)(2017/06/14)
  • 金属3Dプリンタによる金型製作の現状と課題 (会議名:平成29年度金沢市産学連携・先端ものづくり技術交流セミナー(第1回))(2017/06/28)
  • 金属3D プリンタによる金型製作の現状と課題(会議名:技術交流会「金属3Dプリンタの新展開」)(2017/08/01)
  • 金属3Dプリンタによる金型製作の現状と課題 (会議名:次世代金型研究会「金型関連セミナー」)(2017/08/02)
  • 金属3Dプリンタを用いた金型作製の現状と課題(会議名:平成29年度 第3回デジタルものづくり研究会)(2017/09/28)
  • 金型製作における金属AMの現状と課題(会議名:平成29年度 第1回次世代金型技術セミナー)(2017/10/06)
  • 金属AMを用いた金型製作の現状と課題(会議名:第62回材質制御研究会)(2017/11/17)
  • 金属AMによる金型製作の現状と課題(会議名:平成29年度産業技術連携推進会議 製造プロセス部会,他合同分科会)(2017/11/22)
  • 金属AMを用いた金型作製の現状と課題(会議名:平成29年度ものづくり革新推進事業「金属積層造形技術セミナー」)(2018/02/08)
  • 製造装置としての金属3Dプリンタの課題(会議名:3Dプリンタ研究会 第7回利活用セミナー)(2018/03/08)
  • 金属AMを用いた金型製作の現状と課題 (会議名:製造技術のための3Dプリンティング ,3Dプリンティング基盤技術の最新動向:講演&見学会)(2018/07/03)
  • PBF法で造形した金型内部水管の表面加工(会議名:一般社団法人軽金属学会 第 109 回シンポジウム 「金属学研究者と技術者のための3Dプリンタ科学・技術・造形事例」)(2018/10/05)
  • 金属AMを用いた金型製作の現状と課題(会議名:日本金属学会・ 日本鉄鋼協会 東海支部 第74回「金属3次元積層造形法による新たなものづくり」)(2018/11/08)
  • 金属AMの動向と基礎研究から見えてきた可能性(会議名:(公社)精密工学会 生産・経営知識学専門委員会 「3D アディティブマニュファクチャリングの最前線」)(2019/01/10)
  • 金属AMの普及に向けた課題 (会議名:平成30年度 NEDO 『TSC Foresight』セミナー(第3回)「金属積層造形プロセス」 )(2019/02/08)
  • 金属AMを用いた金型製作とアカデミアからのアプローチ(会議名:インターモールド 「3D プリンティングパビリオン」)(2019/04/17)
  • 金属AMを用いた金型製作とアカデミアからのアプローチ (会議名:ナノテクノロジービジネス推進委員会 「3D プリンタ分科会」)(2019/06/03)
  • 金属AMを用いた金型製作とアカデミアからのアプローチ (会議名:精密工学会 難削材加工専門委員会 第105回委員会)(2019/06/12)
  • 金属AMを用いた金型製作とアカデミアからのアプローチ (会議名:インターモールド 「3D プリンティングパビリオン」)(2019/06/19)
  • 金属AMを用いた金型製作の現状と課題(会議名:金型・精密加工技術研究会 講習会)(2020/02/06)
  • 金属AMを用いた金型製作とアカデミアからのアプローチ (会議名:一般社団法人 日本3Dプリンティング産業技術協会 第7回技術セミナー 「高性能金型・砂型と3Dプリンティング」)(2020/09/18)
  • 金属3Dプリンタがもたらす「ものづくり」の変革に向けて (会議名:日本海イノベーション会議 スマートものづくりの最先端 ~夢の生産システムに挑む~)(2020/09/26)
  • 金属3Dプリンタがもたらす「ものづくり」の変革に向けて (会議名:燕三条ものづくりメッセ 2020 技術講演会 「中小企業での金属3Dプリンタの活用」)(2020/10/23)
  • 粉末床溶融結合法で得られた造形物の高精度化を目指した取り組み (会議名:日本機械学会 第4回RC288分科会)(2020/12/11)
  • レーザ照射部の可視化による粉末溶融・凝固現象の解明 (会議名:電気加工学会 第229回研究会)(2021/02/05)
  • Visualization of additive manufacturing processes(会議名:7th Industrial Laser Application Symposium)(2021/03/24)
  • 金属AMを用いた金型製作とアカデミアからのアプローチ(会議名:一般社団法人日本金型工業会西部支部 WEBセミナ)(2021/04/08)
  • 金属AMを用いた高機能金型の製作 (会議名:公益社団法人砥粒加工学会北陸信越地区部会 令和3年度地区部会大会・第1回研究会)(2021/06/17)
  • 第1部:金属Additive Manufacturing(AM)がもたらす「ものづくり」の変革に向けて 第2部:金属 AM を用いた金型製作とアカデミアからのアプローチ (会議名:京都大学精密計測加工研究コンソーシアム 第3回特別セミナー)(2021/08/31)
  • レーザ照射部の可視化による金属AMの現象解明に関する研究 (会議名:(一社)プラスチック成形加工学会  第29回秋季大会)(2021/11/30)
  • Fabrication of release agent supply die with porous structure using metal-based additive manufacturing with laser beam(会議名:37th International Conference of the Polymer Processing Society)(2022/04/14)
  • 金属3Dプリンタがもたらす「ものづくり」の変革に向けて (会議名:MEX金沢2022)(2022/05/20)
  • 金属AM部品の高精度化に向けたアカデミアからのアプローチ(会議名:精密加工研究会 第110回例会)(2022/05/27)
  • 金属3Dプリンタがもたらす「ものづくり」の変革に向けて(会議名:令和4年度「新たな金属積層造形技術研究会」第4回)(2022/06/08)
  • 金属AM部品の高精度化に向けたアカデミアからのアプローチ(会議名:Formnext Forum Tokyo 2022)(2022/09/28)
  • 3 D プリンタの金型への応用に関する研究について (会議名:日本3Dプリンティング産業技術協会 第16回技術セミナ 「型技術と3Dプリンティング」)(2022/10/21)
  • 金属Additive Manufacturingがもたらす「ものづくり」の変革に向けて(会議名:Additive Manufacturing エリアin JIMTOF2022 特別基調講演)(2022/11/08)
  • Distinctive gas solutions for sustainable metal additive manufacturing(会議名:FORMNEXT 2022, TCT conference)(2022/11/15)
  • 金属3Dプリンタがもたらす「ものづくり」の変革に向けて (会議名:金沢市 第126回 異業種ビジネスサロン(2月))(2023/02/16)
  • 金属AMを使いこなすために知っておきたいこと (会議名:岐阜大学 次世代3次元積層技術研究会 第3回勉強会)(2023/08/28)
  • 金属3Dプリンタがもたらす「ものづくり」の変革に向けて (会議名:令和5年度 東海・北陸地区 国立大学法人等技術職員合同研修(機械コース))(2023/08/31)
  • 金属AMの現状と革新ツールとしての可能性 (会議名:(一社)溶接学会 令和5年度 秋季全国大会 ワークショップ)(2023/09/14)
  • 金属AMの現状と革新ツールとしての可能性 (会議名:中部経済産業局 「デジタルものづくり研究会」)(2023/10/12)
  • 金属AMの現在地と金型製作への展開 (会議名:金属3Dプリンタ活用セミナ5, 量産金型への適用事例と新たな材料開発)(2023/11/24)
  • 金属AMの現在地と普及に向けてアカデミアができること (会議名:日本3Dプリンティング産業技術協会 金属AM研究会)(2024/03/01)

その他(報告書など)

  • レーザによる歯の治療 上田隆司,古本達明,他2名 先端加工学会 16巻 1号 22-24頁 1997/04 ⑫書評・文献紹介等
  • コンクリートU字溝自動反転装置の開発支援-コンカレントエンジニアリングの活用事例- 古本達明,他2名 石川県工業試験場 49頁 2000/11 ⑬会議報告書等
  • 視覚障害者向け携帯型色識別装置の開発-福祉機器産業育成のための支援について 前川満良,古本達明,他5名 石川県工業試験場 50頁 2001/12 ⑬会議報告書等
  • 電動車いすの軽量化設計 古本達明,他4名 養賢堂 53巻 1号 163-168頁 2001/01
  • セラミックスの3次元微細加工技術 坂谷勝明,舟田義則,古本達明 セラミックス誌 39巻 12号 994-997頁 2004/12 ⑫書評・文献紹介等

全て表示

  • 微粒超砥粒砥石のレーザ切断 古本達明,上田隆司 砥粒加工学会誌 49巻 4号 24-27頁 2005/04 ⑫書評・文献紹介等
  • 能登栗の皮むき省力化機器の開発 多加充彦,古本達明,嶺蔭士朗 石川県工業試験場 54頁 2005/12 ⑬会議報告書等
  • 3次元微細加工技術の開発 坂谷勝明,古本達明,他3名 石川県工業試験場 54頁 2005/12 ⑬会議報告書等
  • Nd:YAGレーザによる先進レーザ歯科治療 上田隆司,古本達明 レーザ加工学会 15巻 1号 22-27頁 2008/01 ⑫書評・文献紹介等
  • レーザ光を用いた金属粉末の焼結技術 古本達明,上田隆司 日本工業出版 20巻 5号 5-8頁 2009/05 ⑫書評・文献紹介等
  • レーザ光を用いたハイブリッド歯科治療 古本達明,上田隆司 日本工業出版 20巻 7号 11-15頁 2009/07 ⑫書評・文献紹介等
  • Study on Laser Assisted Milling of Consolidated Structure with the Layered Manufacturing Process 古本達明,上田隆司 RP産業協会 107-112頁 2009/06 ⑫書評・文献紹介等
  • Study on Laser Assisted Milling of Consolidated Structure with 古本達明,上田隆司 RP産業協会 107-112頁 2009/07 ⑮その他
  • 遊離砥粒を用いた金型水管内面のクリーニング 古本達明,他2名 44-45頁 2009/12 ⑭その他記事
  • 金属光造形用粉末のレーザ焼結特性に関する研究,ファイバ導光型2色温度計によるレーザ照射部の温度測定 古本達明,他2名 2011/06 ⑭その他記事
  • 遊離砥粒を用いた金型水管内面のクリーニング(第2報),表面突起付加による研磨効率の改善 古本達明,他 型技術ワークショップ2011 in 岐阜講演論文集 23-24頁 2011/11/16 ⑬会議報告書等
  • 遊離砥粒を用いたダイカスト金型冷却穴の表面改質 古本達明,他5名 日本ダイカスト会議論文集 25-29頁 2014/11/13 ⑨総説・解説(商業誌)
  • 積層造形で得られた金型の高精度化に向けて 古本達明 北陸経済研究 427巻 52-53頁 2014/10/25 ⑨総説・解説(商業誌)
  • 金属粉末積層造形で得られた金型の高機能化 古本達明 計測と制御 54巻 6号 1-7頁 2015/06 ⑥総説・解説(学術雑誌)
  • 3Dプリンタが拓くモノづくりの可能性をさぐる,金属AMを用いた金型製作の現状と課題 古本達明 機械技術 64巻 1号 2016/01 ⑨総説・解説(商業誌)
  • Additive Manufacturingによる金型製作 古本達明 機械の研究 69巻 2号 114-118頁 2017/02/01 ⑨総説・解説(商業誌)
  • レーザ照射による歯質除去と殺菌効果発現 古本達明,杉原成良,和賀正明 砥粒加工学会誌 61巻 4号 191-194頁 2017/04 ⑥総説・解説(学術雑誌)
  • 積層造形法を活用した金型製作 古本達明 塑性と加工 58巻 675号 273-277頁 2017/04/27 ⑥総説・解説(学術雑誌)
  • 遊離砥粒を用いたダイカスト金型用冷却穴の表面加工 古本達明 型技術 32巻 6号 40-43頁 2017/05/01 ⑨総説・解説(商業誌)
  • 金属AMを用いた金型製作の現状と課題 古本達明 成形加工 29巻 9号 316-319頁 2017/08/20 ⑥総説・解説(学術雑誌)
  • 内部配置水管の表面加工による3Dプリンタ製金型の高精度化 古本達明 プラスチック 68巻 12号 28-31頁 2017/12 ⑨総説・解説(商業誌)
  • 金属Additive Manufacturingで製作した金型内部水管の表面加工 古本達明 ケミカルエンジニアリング 2018/06 ⑨総説・解説(商業誌)
  • 金属Additive Manufacturingで製作した金型の高精度化に向けた内部配置水管の表面加工 古本達明 機械技術 2018/10 ⑨総説・解説(商業誌)
  • 金属AM製金型内部水管の表面加工 古本達明 油空圧技術 2019/01 ⑨総説・解説(商業誌)
  • レーザを用いた硬脆材料の熱応力割断 古本達明 素形材 60巻 6号 16-21頁 2019/06 ⑨総説・解説(商業誌)
  • レーザ照射部の可視化による粉末溶融・凝固現象の解明 古本達明,阿部諭,山口貢 ぷらすとす 3巻 34号 12-16頁 2020/10/25 ⑥総説・解説(学術雑誌)
  • 金属を用いた粉末床溶融結合時の溶融池温度測定 古本達明 型技術 37巻 6号 22-25頁 2022/05 ⑨総説・解説(商業誌)
  • レーザを用いる粉末床溶融結合法の造形現象 古本達明 機械技術 71巻 9号 24-27頁 2023/09 ⑨総説・解説(商業誌)
  • cosα法を用いた金属積層体の異方的な残留応力分布測定 江面篤志,阿部諭,古本達明,坂本二郎,佐々木敏彦 非破壊検査 73巻 1号 10-14頁 2024/01 ⑥総説・解説(学術雑誌)

芸術・フィールドワーク

特許

○栗の皮剥き機(公開年月:2009/06/01)(出願国名:日本)(特許番号:4318144)
○研磨材混合流体研磨装置及び研磨方法(出願国名:日本)
○正面フライス加工方法及び正面フライス加工用被削材(出願国名:日本)
○らせん状突起を有する内面を持った金型冷却用水管
○セラミックマトリックス複合材の加工方法(出願国名:日本)
○金型,成型システムおよび金型製造方法(出願国名:日本)(特許番号:6811454)
○レーザー割断方法(特許番号:7164136)
○金型,成型システムおよび金型製造方法(出願国名:中国)(特許番号:2022090500069340)

共同研究希望テーマ

科研費

○若手研究(B)「レーザ歯科治療における酸化チタン粉末の殺菌とその作用メカニズムに関する研究」(2007-2008) 代表者
○若手研究(B)「レーザー光と酸化チタン粉末の併用による殺菌効果発現のメカニズム解明に関する研究」(2009-2010) 代表者
○若手研究(B)「粉末による細菌の凝集システム構築とレーザー照射に起因した殺菌機序解明に関する研究」(2011-2013) 代表者
○基盤研究(C)(一般)「レーザー照射部温度のインプロセスモニタリングによるハイブリッド歯冠形成法の確立」(2014-2016)
○基盤研究(C)(一般)「非う蝕性歯質欠損のin vitroによる発生機序解明に関する研究」(2017-2019) 代表者
○基盤研究(C)(一般)「粉末の溶融凝固現象の把握に基づく品質を保証する造形条件設定指針の構築」(2021-2023) 代表者
○基盤研究(C)「砥石作業面のレーザコンディショニングを併用した研削焼入れの実現」(2006-2007) 分担者
○基盤研究(B)「レーザによる摺動面のマイクロパターニングに関する研究」(2006-2008) 分担者
○挑戦的萌芽研究「フリーカーボンを含有させた低摩擦コーティング膜の開発とその難削材加工への適用」(2010-2011) 分担者
○基盤研究(B)「ホロカソード放電型スパッタ装置によるフリーカーボン含有高潤滑コーティング膜の創成」(2012-2014) 分担者
○挑戦的萌芽研究「強ねじれエンドミルによる傾斜切削と発生ガス分析によるCFRPの高品位加工」(2013-2014)
○基盤研究(B)(一般)「窒化バナジウムを含有する高温潤滑複合コーティング膜の開発とその難削材加工への適用」(2018-2020) 分担者

競争的資金・寄付金等

○競争的資金(学外) (2004-2004) 研究 レーザによる超砥粒砥石表面の3次元形状加工の研究 FS可能性試験 研究成果活用プラザ石川
○競争的資金(学外) (2006-2007) 研究 金属光造形と成形技術の高度化による企業連携グリッドモデル構築 地域新生コンソーシアム研究開発事業 経済産業省
○競争的資金(学外) (2007-2009) 研究 2波長レーザを用いた石英ガラス板の高品位割断技術の開発 民間助成 財団法人天田金属加工機械技術振興財団
○競争的資金(学外) (2008-2008) 研究 レーザ局所加熱による小径工具の高機能切削技術確立 平成20年度学長戦略経費(重点研究経費) 金沢大学
○競争的資金(学外) (2009-2009) 研究 汎用レーザによる表面周期構造の創成と気体軸受への応用 シーズ発掘試験 JSTイノベーションプラザ石川
○競争的資金(学外) (2010-2010) 研究 ファイバーレーザーによる太陽光発電用シリコンウエハの熱応力割断 研究成果最適展開支援事業(A-STEP) JST
○助成金 (2010-2012) 研究 汎用レーザを用いた微細周期構造の創成と気体軸受への応用 民間助成 財団法人天田金属加工機械技術振興財団
○助成金 (2010-2010) 研究 微細金型製作のための積層構造物内部の残留応力低減に関する研究 民間助成 財団法人マザック財団
○助成金 (2011-2011) 研究 Surface Temperature during Cavity Preparation on Human Tooth by Er:YAG Laser Irradiation 民間助成 公益財団法人三豊化学技術開発等事業
○競争的資金(学外) (2011-2013) 研究 次世代構造部材創製・加工技術(軽量耐熱複合材CMC技術開発) エネルギー使用合理化技術開発等事業 経済産業省
○競争的資金(学外) (2017-2017) 研究 金属粉末積層造形金型の変形抑止を実現する高精度製造技術の研究 平成29年度機械振興補助事業 公益社団法人JKA 
○競争的資金(学外) (2018-2020) 研究 塗布可能なポーラス形状部を金属3Dプリンターで実現する高生産性・長寿命ダイカスト金型の開発 サポイン事業
○助成金 (2020-2022) 研究 粉末床溶融結合法によるスパッタレス造形プロセスの開発 一般研究開発助成(レーザプロセッシング)) 公益財団法人天田財団
○助成金 (2020-2021) 研究 金属AMの高強度・高精度化に向けたスパッタレス造形プロセスの開発 大学の新技術研究に対する奨励 公益財団法人 澁谷学術文化スポーツ振興財団

共同研究・受託研究実績

A-STEP採択課題

学域・学類担当授業科目

○大学・社会生活論(2017)
○レーザー工学(2017)
○機械工作実習(2017)
○生産システム工学(2017)
○機械機能探求(2017)
○レーザー工学(2017)
○大学・社会生活論(2016)
○生産システム工学(2016)
○レーザー工学(2016)
○機械工作実習(2016)
○機械機能探求(2016)
○機械工作実習(2015)
○機械機能探求(2015)
○レーザー工学(2015)
○生産システム工学(2015)
○大学・社会生活論(2015)
○大学・社会生活論(2014)
○機械工作実習(2014)
○機械機能探求(2014)
○生産システム工学(2014)
○レーザー工学(2014)

大学院担当授業科目

○機械加工学(2017)
○生産加工特論(2017)
○生産加工特論(2017)
○生産加工特論(2017)
○生産加工特論(2017)
○High Energy Beam Machining A(2017)
○High Energy Beam Machining B(2017)
○特殊加工学特論A(2017)
○特殊加工学特論B(2017)
○機械加工学(2016)
○生産加工特論(2016)
○特殊加工学特論A(2016)
○特殊加工学特論B(2016)
○特殊加工学特論(2015)
○生産加工特論(2015)
○機械加工学(2015)
○生産加工特論(2014)
○デジタルエンジニアリング特論(2014)
○物理・化学加工特論(2014)
○生産加工特論(2014)
○加工システム特論(2014)
○機械加工学(2014)
○特殊加工学特論(2014)

他大学の客員教授

教育活動(FD)に関する研究

国際事業協力

留学生参加の社会活動

審議会等の参加

講演可能なテーマ

○レーザ加工(キーワード:レーザ,加工,積層造形)

その他公的社会活動

○白山市立北陽小学校育友会(2010-2012) 小学校の育友会役員として活動した.

このページの先頭へ