Jump to contents

Researcher Information

last modified:2024/11/27

Professor FURUMOTO Tatsuaki

Mail Laboratory Website

Faculty, Affiliation

Advanced Manufacturing Technology Institute

College and School Educational Field

Division of Mechanical Science and Engineering, Graduate School of Natural Science and Technology
Division of Mechanical Science and Engineering, Graduate School of Natural Science and Technology
Course in Mechanical Creation Engineering, School of Mechanical Engineering, College of Science and Engineering

Laboratory

Manufacturing Systems Laboratory TEL:076-234-4723 FAX:076-234-4723

Academic Background

【Academic background(Doctoral/Master's Degree)】
Kanazawa University Doctor System Design and Planning 200603 Completed
【Academic background(Bachelor's Degree)】
Kanazawa University Mechanical System Engineering 199803
【Degree】
Ph.D.(Engineering)

Career

Engineering Industrial research institute of ishikaw Engineering(1998/04/01-2006/03/31)

Year & Month of Birth

1974/02

Academic Society

Japan Society for Precision Engineering
JSPE
The Japan Society of Mechanical Engineers

Japan Society for Abrasibe Technology
Japan Society of Electrical Machining Engineers
Japan Laser Processing Society
Japanese Society for Laser Dentistry
Journal of Japan Society of Powder and Powder Metallurgy
Japan Society for Design Engineering
CIRP

Award

○JSPE_HSBO Encouragement prize(2006/03/20)
○JSME_HSBO Technical prize(2006/03/08)
○LEM21 Best Paper(2007/11/09)
○JSPE Affiliate(2009/03/10)
○Best presentation(2009/11/23)
○Best presentation(2009/11/23)
○Best presentation(2009/11/23)
○Best presentation(2009/11/23)
○Best Poster Award (2016/11/20)
○Best Poster Award (2016/11/20)
○Best Poster Award (2016/11/20)
○Best Poster Award (2016/11/20)

Specialities

Production engineering/Processing studies、Conservative dentistry

Speciality Keywords

laser processing, SLS rapid prototyping, dental treatment

Research Themes

Study on the dental treatment with laser beam

In dental treatment, laser beam is not only used as a substitute of a rotary cutting instrument, but also applied to various surgical treatment of the hard and soft tissues. Laser irradiation to the human tooth is effective for the sterilization of the bacteria which causes caries and periodontosis. The purpose of our study is to solve the mechanism of bactericidal effects induced by a laser irradiation. A temperature measurement on the human tooth is performed with two color pyrometer. In addition, a measurement of the impulse force induced by a laser irradiation on the human tooth is measured.

Study on the layered manufacturing with metal powder

This study describes the consolidation characteristics of chromium molybdenum steel (SCM) based powder used for rapid tooling. The laser beam used was a Yb:fiber laser with a wavelength of 0.1mm. In order to investigate the influence of irradiation conditions on the maximum temperature at the focal area, a two-color pyrometer developed by the authors was used. In addition, the cross section of the consolidated structure was analyzed with an electron probe micro analysis, and the cutting force was measured with a dynamometer.

Study on Reduction of Residual Stress Induced during Rapid Tooling Process

This paper deals with the reduction of residual stress induced during the layered manufacturing processes. The powder used is a mixture of ferrous based metal powder. To evaluate the residual stresses induced during layered manufacturing processes, a strain gauge is attached on the bottom face of the consolidation plate. The residual stress within consolidated structure is calculated from the amount of change measured by the strain gauge when the consolidated structure is cut with an end mill. The influences of the thickness and the height of consolidated structure on the residual stresses are investigated. In addition, the effect of the pre-heating by a laser beam irradiation and the laser condition for the layered manufacturing are evaluated.

Study on the micro fabrication with laser beam

Books

  •  - - 2009/10

Papers

  •  Study on dental treatment with YAG laser (1st report) -Temperature of dental tissue irradiated with laser beam T. UEDA, K.YAMADA, T. FURUMOTO 66 9 1388-1393 2000/09
  •  Cutting-off characteristic of super abrasive stone with pulsed YAG laser T. FURUMOTO, Y. FUNADA, T. UEDA 47 1 39-43 2003/01
  •  Cutting Characteristics of CBN Stone and Diamond Stone with Pulsed Nd:YAG Laser- Laser Cutting of Super Abrasive Stones - T. FURUMOTO, T. UEDA et al. 71 4 501-505 2005/04
  •  Tip Processing of Optical Fiber for Dental Treatment with TiO2 Powder (2nd report) -Removal Characteristics of the Enamel by TiO2 Processed Fiber - T. FURUMOTO, T.UEDA, N. SUGIHARA et al. 16 2 86-92 2005/10
  •  Improvement of drilling of super abrasive stone by pulsed Nd:YAG laser beam -Application of laser drilling to mounted wheels T. FURUMOTO, T. UEDA, H. OGURA 53 1 34-38 2006/01

show all

  •  Study on the Measurement of Physical Properties in the Metal Powder for Rapid Prototyping T. FURUMOTO, T. UEDA, A. HOSOKAWA, et al. 73 5 558-562 2007/05
  •  Tip Processing of Optical Fiber for Dental Treatment with TiO2 Powder (3rd report)- Energy Partition at the Tip of TiO2 Processed Fiber - T. FURUMOTO, T. UEDA, N. SUGIHARA et al. 18 1 34-41 2007/04
  •  Tip Processing of Optical Fiber for Dental Treatment with TiO2 Powder (4th report)- Measurement of the Temperature at the TP Fiber Tip - T. FURUMOTO, T. UEDA, A. HOSOKAWA, et al. 18 2 103-110 2007/10
  •  Tip processing of quartz optical fiber for dental therapy N. SUGIHARA, T. FURUMOTO, T. UEDA 52 3 164-169 2008/03
  •  Combined Effect of Nd:YAG Laser and TiO2 on Bactericidal Action in vitro M. WAGA, T. UEDA, T. FURUMOTO, N. SUGIHARA 19 1 10-16 2008/04
  •  Study on the Sintering Characteristics of the Mixed Metal Powder with Yb Fiber Laser T. FURUMOTO, T. UEDA, A. HOSOKAWA, et al. 72 8 836-840 2008/08
  •  Study on Laser Consolidation of Metal Powder with Yb fiber laser T.FURUMOTO, T. UEDA, et al. 55 8 561-567 2008/08
  •  Study on cutting characteristics of sintered material with Yb:Fiber laser Abdullah YASSIN, T. UEDA, A. HOSOKAWA, T. FURUMOTO, et al. 2 5 833-843 2008/08
  •  Effect of Minimum Quantity Lubrication on Turning Characteristics A. HOSOKAWA, T. FURUMOTO, et al. 74 10 1080-1085 2008/10
  •  Tip processing of quartz optical fiber for dental therapy T.FURUMOTO, T. UEDA et al. 52 10 595-600 2008/10
  •  Cutting Performances of Small Ball Endmill in Milling-combined Laser Metal Sintering T. UEDA, A. YASSIN, T. FURUMOTO et al. 52 12 718-723 2008/12
  •  Effect of Minimum Quantity Lubrication in Turning M.OZAWA, A. HOSOKAWA, T. FURUMOTO et al. 53 2 88-93 2009/02
  •  Cutting Tool Edge Temperature in Finish Hard Turning of Case Hardened Steel R.TANAKA, T. FURUMOTO et al. 407-708 672-675 2009/02
  •  Prevention of Burr Formation in Face Milling of Carbon Steel by Laser Hardening R. TANAKA, T. FURUMOTO, et al. 407-408 672-675 2009/02
  •  Influence of On-the-machine Laser Hardening on Machinability of Carbon Steel in Turning R. TANAKA, T. FURUMOTO, et al. 407-408 690-693 2009/02
  •  Study on Laser Consolidation of Metal Powder with Yb fiber laser -Temperature Measurement of Laser Irradiation Spot- T. UEDA, et al. 4 1 22-27 2009/02
  •  Effect of Laser Heat Treatment for Workpiece on Prevention of Burr Formation in Face Milling of Carbon Steel R. TANAKA, T. FURUMOTO, et al. 53 6 379-384 2009/06
  •  Fabrication of the Quartz Optical Fiber for Dental Treatment with Nd:YAG Laser - Proposal of the New Process with TiO2 powder T. FURUMOTO, T. UEDA, et al. 49 9 941-947 2009/06
  •  Experimental Investigation on Cutting Mechanism of Sintered Material Using Small Ball End Mill Abdullah YASSIN, T. FURUMOTO et al. 209 5680-5689 2009/07
  •  Study on Laser Consolidation of Metal Powder with Yb:fiber laser - Evaluation of Line Consolidation Structure - T. FURUMOTO, T. UEDA et al. 209 5973-5980 2009/07
  •  Measurement of Impulse Stress Induced with Nd:YAG Laser Beam Irradiation T. FURUMOTO, T. UEDA et al. 20 2  67-73 2009/08
  •  Measurement of Impulse Stress Takashi UEDA et al. 75 758  2810-2815 2009/10
  •  Dental Treatment with Laser Beam, Monitoring Methods to Realize Safety Removal of Hard Tooth Tissues Keiji YAMADA, Tatsuaki FURUMOTO et al. 3 5  494-501 2009/11
  •  Control of Machined Workpiece Edge Shape by Laser Hardening R. Tanaka, T. Furumoto et al. 4 1  21-25 2010/01
  •  Study on the Sintering Characteristics of the Mixed Metal Powder with Yb:fiber laser (2nd Report), Proposal of the Evaluation Method of Sintered Structure T. Furumoto, T. Ueda et al. 76 2  173-177 2010/02
  •  Study on Laser Assisted Milling of Ferrous Based Consolidated Material T. Furumoto, T. Ueda et al. 24 1  127-130 2010/03
  •  Study on Wear Mechanism in Milling Sintered Material A. Yassin, T. Furumoto et al. 24 1  77-80 2010/03
  •  Study on Measurement of Dynamic Force Induced by Nd:YAG Laser Beam T. Furumoto, T. Ueda et al. 5 1  59-63 2010/02
  •  Turning of Difficult-to-Machine Materials with Actively Driven Rotary Tools A. Hosokawa, T. Ueda, R. Onishi, R. Tanaka and T. Furumoto 59 1 89-92 2010/06
  •  Study on Elucidation of Bactericidal Effects Induced by Laser Beam Irradiation, Measurement of Dynamic Stress on Laser Irradiated Surface T. Furumoto, A. Kasai, et al. 48 9 827-833 2010/09
  •  Study on Reduction of Residual Stress Induced in Rapid Tooling Process, Influence of Heating Conditions on Residual Stress T. Furumoto, T. Ueda, et al. 447-448 785-789 2010/10
  •  Experimental Investigation on Laser Flattening of Sheet Metal T. Ueda, T. Furumoto, et al. 49 1 137-144 2011/01
  •  Surface Temperature during Cavity Preparation on Human Tooth by Er:YAG Laser Irradiation T. Furumoto, T. Ueda, et al. 60 1 555-558 2011/06
  •  Study on Internal Face Finishing of Cooling Channel in Injection Mold with Free Abrasive Grains T. Furumoto, T. Ueda, et al. 211 11 1742-1748 2011/07
  •  Prevision of Cutting Burr at Face Milling of Stainless Steels Using Laser Heat Treatment R.Tanaka, et al. 77 783 4318-4323 2011/11
  •  Study on Laser Cleaving of Brittle Materials with Two-Types Laser Beam, Precise Cleaving of the Thick Glass Materials with CO2 Laser and Er:YAG Laser T. Ueda, et al. 78 788 1295-1304 2012/04
  •  Study on Thermal and Strain Behavior in Selective Laser Sintering Process Mohd Sanusi Abdul Aziz, et al. 516 203-208 2012/06
  •  Development of tool edge temperature measurement method in wet cutting, Application for CBN and poly crystalline diamond tools H. Nishimoto, et al. 6 6 916-922 2012/09
  •  Pre-Groove Development for Laser Cleaving of Brittle Materials by Using Micro-Lens T. Ishikawa, et al. 6 6 841-848 2012/09
  •  Finishing Performance of Cooling Channel with Face Protuberance inside the Molding Die T. Furumoto, et al.  212 10 2154-2160 2012/10
  •  Internal finishing of cooling channel in molding die with free abrasive grain T. Furumoto, et al. 56 10 698-702 2012/10
  •  Thermal Conductivity of Metal Powder and Consolidated Material fabricated via Selective Laser Melting Mohd Rizal Alkahari, et al. 523-524 244-249 2012/11
  •  Cutting Performance of Ceramic Tools in Turning of Mild Steel R. Tanaka, et al. 523-524 493-496 2012/11
  •  Removal Characteristics of Dental Tissue with Er:YAG Laser Irradiation, Effect of Laser Induced Bubble on Cavity Preparation T. Furumoto, et al. 78 794 3594-3604 2012/10
  •  Creation of Modified Surface Layer with Superior Roughness by Combination Machining R. Tanaka, et al. 78 794 3605-3614 2012/10
  •  Consolidation Characteristics of SCM Based Metal Powder M. R. Alkahari, T. Furumoto, et al. Journal of Advanced Mechanical Design, Systems, and Manufacturing 8 1 1-16 2014/04
  •  Melt Pool and Single Track Formation in Selective Laser Sintering/ Selective Laser Melting M. R. Alkahari, T. Furumoto, et al. Advanced Materials Research 933 196-201 2014/05
  •  Thermal Stress Cleaving of Si-Wafer, Investigation of Fracture Initiation during Laser Beam Irradiation A. M. Saman, T. Furumoto, et al Advanced Materials Research 1101 412-418 2015/01
  •  Permeability and strength of a porous metal structure fabricated by additive manufacturing T. Furumoto, et al. Journal of Materials Processing Technology 219 10-16 2015/01
  •  A Study on Separating of a Silicon Wafer with Moving Laser Beam by Using Thermal Stress Cleaving A. M. Saman, T. Furumoto, et al. Journal of Materials Processing Technology 223 252-261 2015/04
  •  Influence of Cutting Fluid on Tool Edge Temperature in End Milling Titanium Alloy R. Tanaka, A. Hosokawa, T. Furumoto, M. Okada, T. Ueda Journal of Advanced Mechanical Design, Systems, and Manufacturing 9 5 1-10 2015/12
  •  Mechanisms and Characteristics of Direct Cutting of Tungsten Carbide Using a Diamond-coated Carbide End Mill M. Okada, A. Yoshida, T. Furumoto, H. Watanabe, N. Asakawa, M. Otsu  International Journal of Advanced Manufacturing Technology 86 1827-1839 2016/01
  •  Cutting performance of CBN and diamond tools in dry turning of cemented carbide A. M. N. A. Kamaruddin, A. Hosokawa, T. Ueda, T. Furumoto, T. Koyano Mechanical Engineering Journal 3 1 115-124 2016/01
  •  High speed cutting of Ti-6Al-4V with diamond tools A. M. N. A. Kamaruddin, A. Hosokawa, T. Ueda, T. Furumoto International Journal of Automation Technology 10 3 411-419 2016/05
  •  High-quality End Milling of CFRP, Inclination milling with high helix end mill A. Hosokawa, N. Hirose, T. Ueda, T. Koyano, T. Furumoto International Journal of Automation Technology 10 3 372-380 2016/05
  •  Micro Electrical Discharge Machining Using High Electric Resistance Electrodes T. Koyano, Y. Sugata, A. Hosokawa, T. Furumoto Precision Engineering 47 480-486 2017/01
  •  Thermal Cleavage of Laminated Wafer by Laser Beam Irradiation, Crack Propagation Mechanism in Glass/Silicon Laminated Wafer  T. Furumoto, K. Fujisawa, A. Hosokawa, T. Koyano, T. Ueda 83 2 167-172 2017/02
  •  Study on Deformation Restraining of Metal Powder Fabricated by Selective Laser Melting T. Furumoto, et al. Materials Processing Technology 245  2017/07/01
  •  Evaluation of the Minimum Quantity Lubrication in Orthogonal Cutting with the Application of Finite Element Method A. S. Jamaludin, A. Hosokawa, T. Furumoto, T. Koyano, Y. Hashimoto International Journal of Mechanical and Mechatronics Engineering 17  1 104-109 2017/01
  •  Development of Highly Accurate Simulation Model of Wafer Behavior Considering Contact Between Wafer and Carrier During Double-sided Lapping Y. Hashimoto, R. Kondo, T. Furumoto, A. Hosokawa 83 5 433-438 2017/05/05
  •  Investigation of Wafer Behavior Based on Simulation of Double-Sided Lapping Y. Hashimoto, T. Sano, T. Furumoto, A. Hosokawa 84 2 188-193 2018/02/05
  •  Design and development of a low-cost 3D metal printer Nor Ana Rosli, Mohd Rizal Alkahari, Faiz Redza Ramli, Shajahan Maidin, Mohd Nizam Sudin, Sivarao Subramoniam, Tatuaki Furumoto Journal of Mechanical Engineering Research and Developments 41 3 47-54 2018/09
  •  Analysis of Electrochemical Machining Process with Ultrashort Pulses Considering Stray Inductance of Pulse Power Supply T. Koyano, A. Hosokawa, T. Furumoto Journal of Advanced Mechanical Design, Systems, and Manufacturing 12 5 18-00169 2018/07
  •  Turning of Difficult-to-Machine Materials with an Actively Driven Rotary Tool (ADRT) —Proposition of reciprocating turning contingent on fundamental cutting characteristics— A. Hosokawa, H. Yoshimatsu, T. Koyano, T. Furumoto, et al. Journal of Advanced Mechanical Design, Systems, and Manufacturing 12 5 18-00175 2018/07
  •  Evaluation of separating process for different materials by thermal stress cleaving technique Alias Mohd Saman, Tatsuaki Furumoto International Journal of Engineering and Technology 7 4 158-161 2018
  •  Micro-Electrical Discharge Machining of Micro-Rods Using Tool Electrodes with High Electrical Resistivity T. Koyano, Y. Sugata, A. Hosokawa, T. Furumoto Precision Engineering 55 95-100 2018/09
  •  Formation mechanism of pores inside built structure obtained by metal-based additive manufacturing K. Egashira, T. Furumoto, et al. International Journal of Automation Technology 13 3 330-337 2019/03
  •  Estimation of material removal rate distribution considering workpiece attitude in double-sided polishing Y. Hashimjoto, T. Sano, T. Furumoto, A. Hosokawa Journal of Advanced Mechanical Design, Systems, and Manufacturing 13 1 JAMDSM0020 2019/02
  •  Development an identification method of friction coefficient between wafer and carrier in double-sided lapping Y. Hashimjoto, T. Sano, T. Furumoto, A. Hosokawa Precision Engineering 56  364-369 2019/02
  •  Microstructure of Built Part Obtained by Powder Bed Fusion Process with Metal T. Furumoto, et al.  Key Engineering Materials 825 1-6 2019/10
  •  Study on high quality thermal stress cleavage of thick sapphire wafer T. Kawabe, T. Furumoto, et al. Key Engineering Materials 825 39-44 2019/10
  •  Studies on Eco-friendly Grinding with Extremely Small Amount of Coolant, Applicability of contact type flexible blush nozzle A. Hosokawa, R. Shimizu, T. Kiwata, T. Koyano, T. Furumoto, Y. Hashimoto International Journal of Automation Technology 13 5 648-656 2019/09
  •  Studies on high-efficiency and high-precision orthogonal turn-milling-The effects of relative cutting speed and tool axis offset on tool flank temperature K. Shimanuki. A. Hosokawa, T. Koyano, T. Furumoto, Y. Hashimoto Precision Engineering 66 180-187 2020/07/22
  •  Fundamental investigation of gyro finishing experimental investigation of contact force between cylindrical workpiece and abrasive media under dry condition Y. Hashimoto, T. Ito, Y. Nakayama, T. Furumoto, A. Hosokawa Precision Engineering 67 123-136 2020/09/20
  •  CO2 laser cleavage of chemically strengthened glass T. Furumoto, Y. Hashimoto, H. Ogi, T. Kawabe, M. Yamaguchi, T. Koyano, A. Hosokawa Journal of Materials Processing Technology 289 116961 2020/11/05
  •  Experimental investigation into the spatter particle behavior of maraging steel during selective laser melting T. Furumoto, K. Egashira, K. Oishi, S. Abe, M. Yamaguchi, Y. Hashimoto, T. Koyano, A. Hosokawa Journal of Advanced Mechanical Design, Systems, and Manufacturing 15 4 jamdsm0039 2020/11/11
  •  Investigation of orthogonal turn-milling for higher machining efficiency and accuracy, Relationship between material removal rate and tool flank temperature K. Shimanuki. A. Hosokawa, T. Koyano, T. Furumoto, Y. Hashimoto Journal of Advanced Mechanical Design, Systems, and Manufacturing 15 4 jamdsm0043 2020/11/19
  •  Internal face finishing for a cooling channel using a fluid containing free abrasive grains M. Yamaguchi, T. Furumoto, S. Inagaki, M. Tsuji, Y. Ochiai, Y. Hashimoto, T. Koyano, A. Hosokawa The International Journal of Advanced Manufacturing Technology 114  497-507 2021/03/17
  •  Electrochemical milling using a parallel mechanism for high-speed translation of tool electrodes T. Koyano, et al. International Journal of Electrical Machining 26 25-32 2021/03/26
  •  Thermal stress cleavage of a single-crystal round sapphire bar by carbon dioxide laser T. Furumoto et al.,  Journal of Materials Processing Technology 287 117237 2021/05/26
  •  Effects of the powder morphology, size distribution, and characteristics on the wettability of selective laser melted H13 steel M. Yamaguchi, T. Furumoto, et al. Journal of Advanced Mechanical Design, Systems, and Manufacturing 15 3 1-13 2021/06/03
  •  Fabrication of release agent supply die with porous structure by using metal-based AM H. Chiba, T. Furumoto et al. International Journal of Automation Technology 15 6 2021/11/05
  •  Improving surface quality using laser scanning and machining strategy combining powder bed fusion and machining processes T. Furumoto, S. Abe, et al. The International Journal of Advanced Manufacturing Technology 117 11 3405-3413 2021/08/28
  •  A novel measurement method for the torque acting on the upper platen in a three-way double-sided lapping/polishing machine Y. Hashimoto, R. Ozaki, T. Furumoto, A. Hosokawa Precision Engineering 72 891-898 2021/08/12
  •  Evaluating the thermal characteristics of laser powder bed fusion T. Furumoto, K. Oishi, et al. Journal of Materials Processing Technology 299 117384 2021/09/24
  •  A calculation method for workpiece profile variation during double-sided lapping by considering workpiece elastic deformation Y. Hashimoto, R. Ozaki, T. Furumoto, A. Hosokawa Precision Engineering 73 457-469 2021/10/05
  •  Influence of metal transfer behavior under Ar and CO2 shielding gases on geometry and surface roughness of single and multi-layer structures in GMAW-based wire arc additive manufacturing of mild steel M. Yamaguchi, R. Komata, T. Furumoto, et al. The International Journal of Advanced Manufacturing Technology 119 911-926 2021/11/11
  •  Improving finishing efficiency using a cover plate in gyro finishing Y. Hashimoto, Y. Nakayama, T. Furumoto, A. Hosokawa Precision Engineering 74 140-146 2021/11/05
  •  Evaluation of spatter particles, metal vapour jets, and depressions considering influence of laser incident angle on melt pool behaviour K. Tsubouchi, T. Furumoto, et al. The International Journal of Advanced Manufacturing Technology 120 1821-1830 2022/02/15
  •  Influence of process parameters on the geometry and surface defects of the single-line track in the directed energy deposition of pure copper onto 304 stainless-steel using a blue laser M. Yamaguchi, M. Yamazaki,Y. Funada, T. Yachi, A. Saikai, T. Furumoto  The International Journal of Advanced Manufacturing Technology 121 1191-1100 2022/05/25
  •  Bold Approach in Finite Element Simulation on Minimum Quantity Lubrication Effect during Machining Ainur Munira Rosli, Ahmad Shahir Jamaludin, Mohd Nizar Mhd Razali, Hosokawa Akira, Tatsuaki Furumoto, Mohd Shahril Osman Journal of Modern Manufacturing Systems and Technology 2 33-41 2019/03/15
  •  Finishing speed improvement using side cover plates in gyro finishing Y. Hashimjoto, Y. Nakayama, T. Furumoto, A. Sekiya T. Yamada, T. Kawahara, A. Hosokawa International Journal of Automation Technology 17 1 47-54 2023/01
  •  Novel method to visualize Preston's coefficient distribution for chemical mechanical polishing process Y, Hashimoto, T. Furumoto, T. Sato, N. Suzuki, H. Yasuda, S. Yamaki, Y. Mochizuki Japanese Journal of Applied Physics 61 116502 2022/10
  •  Humidity control in laser powder bed fusion using titanium alloy powder for quality assurance of built parts and reusability of metal powder M. Yamaguchi, K. Kushima, Y. Ono, T. Sugai, T. Oyama, T. Furumoto Journal of Materials Processing Technology 311 117817 2023/01
  •  Finishing characteristics with free abrasive grains and cooling performance of internal channels with different cross-sectional geometries International Journal of Automation Technology 18 2 216-224 2024/03
  •  Cut-off characteristics of CBN and diamond stick stone with pulse YAG laser -Laser cutting of super abrasive stone T. FURUMOTO, T. UEDA, et al. 5662 2004/05
  •  Tip Processing of Quartz Optical Fiber for Dental Treatment with TiO2 Powder -Irradiation Characteristics of TiO2-processed(TP) Fiber T. FURUMOTO, T. UEDA, et al. 6 25 2006/05
  •  Minimum Quantity Lubrication Turning of Ferrous Metals - Measurement of tool temperature using fibercoupled two-color pyrometer - A. HOSOKAWA, T. FURUMOTO, et al. 07 205 339-342 2007/11
  •  Study on Laser Consolidation of Metal Powder with Yb fiber laser -Temperature Measurement of Laser Irradiation Spot- T. FURUMOTO, T. UEDA, et al. 2008/06
  •  Minimum Quantity Lubrication Turning Using Tools with oil Holes A. HOSOKAWA, T. FURUMOTO, et al. 221-224 2008/10
  •  Improvement of Chip Controllability of Carbon Steel in Turning by Laser Heat R. TANAKA, T. FURUMOTO, et al 229-232 2008/10
  •  Cutting Tool Edge Temperature in Finish Hard Turning of Case Hardened Steel R. TANAKA, T. FURUMOTO, et al ICPMT2009 (Progress of Machining Technology) 538-541 2009/04
  •  Prevention of Burr Formation in Face Milling of Carbon Steel by Laser Hardening R. TANAKA, T. FURUMOTO, et al Proc. of ICPMT2009 672-675 2009/04
  •  Influence of On-the-machine Laser Hardening on Machinability of Carbon Steel in Turning R. TANAKA, T. FURUMOTO, et al Proc. of ICPMT2009 690-693 2009/04
  •  Study on Laser Assisted Milling of Ferrous Based Consolidated Material T. FURUMOTO, T. UEDA, et al. Proc. of ICMDT 47 2009/06
  •  Study on Wear Mechanism in Milling Sintered Material A. YASSIN, T. UEDA, T. FURUMOTO, et al. Proc. of ICMDT 46 2009/06
  •  Study on Measurement of Impulse Force Induced by Nd:YAG Laser Beam T. FURUMOTO, T. UEDA , et al. Proc. of LAMP2009 327 2009/06
  •  Study on Mechanism of Bactericidal Effect Induced by Nd:YAG Laser, Irradiation, Variation of Impulse Stress with Absorbent Takashi UEDA et al. 33 2009/10
  •  Laser Sintering Characteristics of Metallic Powder with Yb Fiber Laser, Optimization of Processing Conditions about Laser irradiation Naoto KOBAYASHI, Tatsuaki FURUMOTO et al. 593-596 2009/12
  •  Finishing of Inner Wall of Cooling Channel in Mold by High Speed Flowing Yasuhiro KANO, Tatsuaki FURUMOTO et al. 401-404 2009/12
  •  Study on Cleaving Mechanism of Silicon Wafer By Laser Beam Irradiation Reiko TAKEDA, Tatsuaki FURUMOTO et al. 589292 2009/12
  •  Study on Reduction of Residual Stress Induced in Rapid Tooling Process, Influence of Heating Conditions on Residual Stress T. Furumoto, T. Ueda, et al. Proc. of ICPE2010 49-50 2010/07
  •  Study on Optimization of Cnsolidation Conditions by the Monitoring ofCutting Force, Application to Rapid Tooling Processes  T. Furumoto, T. Ueda, et al. Proc. of ISFA 50 2010/07
  •  Study on Inner Face Polishing of Cooling Channel within Molding Die with Flowing Slurry, Polishing Characteristics of Cooling Channel Obtained by Layered Manufacturing Process T. Furumoto, T. Ueda, et al.  Proc. of CIRP HPC 389-392 2010/10
  •  Measurement of Dynamic Stress Generated in TiO2 Solution, Induced by Nd:YAG Laser Beam Irradiation A. Kasai, T. Furumoto, et al. Proc. of ICMT2010 337-341 2010/11
  •  Study on temperature measurement during Er:YAG laser irradiation with two-color pyrometer T. Furumoto, T. Ueda, et al. Proc. of WFLD-ED2010 2011/06
  •  Combined Effect of Nd:YAG laser and TiO₂ on Bactericidal Action M. Waga, T. furumoto, T. Ueda Proc. of  WFLD-ED 2011/06
  •  Studies on Effective Parameters for FEM Analysis of MQL Cutting A. S. Jamaludin, A. Hosokawa, T. Furumoto, T. Koyano Proc. of iDECON2015 23-32 2015/09
  •  Cutting performance of CBN and diamond tools in dry turning of cemented carbide A. M. N. A. Kamaruddin, A. Hosokawa, T. Ueda, T. Furumoto, T. Koyano Proc. of LEM21 No.0508 2015/10
  •  Miniaturization of micro EDM using high electric resistance electrode Y. Sugata, T. Koyano, A. Hosokawa, T. Furumoto Proc. of LEM21 No.1105 2015/10
  •  Study on the Effect of External Hydrostatic Pressure on Electrical Discharge Machining T. Koyano, S. Suzuki, A. Hosokawa, T. Furumoto  Procedia CIRP 42 46-50 2016/04
  •  Study on Thermal Stress Cleavage of Chemically Strengthened Glass by CO2 Laser Beam H. Ogi, T. Furumoto, T. Koyano, A. Hosokawa Procedia CIRP 42 460-463 2016/04
  •  Study on High Quality Laser Cleavage of Chemically Strengthened Glass H. Ogi, T. Furumoto, T. Koyano, A. Hosokawa Proc. of IC3MT2016 41 2016/11
  •  Electrochemical Machining with Porous Electrode Fabricated by Additive Manufacturing R. Igusa, Tomohiro Koyano, T. Furumoto, A. Hosokawa, Y. Hashimoto Proc. of ICPE2016 B107-8174 2016/10
  •  Study on High Efficiency Cutting of SiC-based Ceramic Matrix Composites, Application of Diamond Coated Carbide End Mill T. Tanabe, T. Furumoto, S. Mori, Y. Hashimoto, T. Koyano, A. Hosokawa, M. Yano Proc. of ICPE2016 P43-8194 2016/10
  •  Machining of Difficult-to-Machine Materials by PVD Coated End Mills, Application of high smooth coated film deposited by filtered arc deposition (FAD) method G. Hoshino, Tetsuo Fujimoto, A. Hosokawa, T. Furumoto, T. Koyano Proc. of ICPE2016 A210-8136 2016/10
  •  Study on formation mechanism of pores inside built structure by metal-based additive manufacturing K. Egashira, T. Furumoto, et al. Proc. of ISAAT2017 R304 2017/12
  •  Thermophysical properties of SKD61 powder for additive manufacturing, Measurement of thermal conductivity and laser absorption Y. Tanabe, T. Furumoto, et al. Proceedings of the 9th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2017 100 2017/11/13
  •  Investigation of friction coefficient between wafer and carrier during double-sided lapping Y. Hashimoto, T. Sano, T. Furumoto, et al. Proceedings of the 9th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2017 124 2017/11/13
  •  Analytical investigation of workpiece attitude during double-sided polishing Y. Hashimoto, T. Sano, T. Furumoto, et al. Proceedings of the 9th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2017 147 2017/11/13
  •  Hard turning of difficult-to-machine materials with actively driven rotary tool (ADRT)-proposition of reciprocating turning based on the fundamental cutting characteristics A. Hosokawa, H. Yoshimatsu, T. Koyano, T. Furumoto, et al. Proceedings of the 9th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2017 053 2017/11/13
  •  Analysis of electrochemical machining process with ultrashort pulses considering stray inductance of pulse power supply T. Koyano, A. Hosokawa, T. Furumoto, Y. Hashimoto Proceedings of the 9th International Conference on Leading Edge Manufacturing in 21st Century, LEM 2017 148 2017/11/13
  •  Formation of pores inside the built structure obtained by metal-based powder bed fusion process T. Furumoto, et al. Proc. of ICMT2017 2017/10/21
  •  Study on the effectiveness of Extreme Cold Mist MQL system on turning process of stainless steel AISI 316 A. S. Jamaludin, A. Hosokawa, T. Furumoto, T. Koyano, Y. Hashimoto Materials Science and Engineering 319 012054 2018/01
  •  Temperature Measurement of Wire Electrode in Wire EDM by Two-color Pyrometer  T. Koyano, A. Hosokawa, T. Furumoto, Y. Hashimoto Procedia CIRP 68 96-99 2018/04
  •  Study on laser cleavage of thick sapphire wafer with CO2 laser beam, Reduction of waviness in cleavage surface T. Kawabe, T. Furumoto, et al. Proc. of ISFA2018 S049 2018/07
  •  Properties of structure with negative poisson's ratio built by metal powder bed fusion additive manufacturing S. Matsuura, T. Furumoto, et al. Proc. of ISFA2018 S048 2018/07
  •  Microstructure of built part obtained by powder bed fusion process with metal T. Furumoto, et al. Proc. of IC3MT2018 2367 2018/09
  •  Study on high quality thermal stress cleavage of thick sapphire wafer T. Kawabe, T. Furumoto, et al. Proc. of IC3MT2018 2367 2018/09
  •  High-quality machining of CFRP with dDLC-coated and diamond-coated end mills S. Tanaka, A. Hosokawa, G. Hoshino, T. Koyano, T. Furumoto, Y. Hashimoto Proc. of IC3MT2018 2356 2018/09
  •  Turning of Difficult-to-machine Materials with High Pressure Coolant A. Hosokawa, Y. Nomura, T. Koyano, T. Furumoto, Y. Hashimoto Proc. of ICPE2018 B-1-12 2018/11
  •  Study on Removal Characteristics of Soft Tissue by Er:YAG Laser Irradiation H. Okudomi, T. Furumoto, et al. Proc. of ICPE2018 G-1-4 2018/11
  •  Micro Texturing by Electrochemical Machining with Short Voltage Pulses  T. Takahashi, T. Koyano, A. Hosokawa, T. Furumoto, Y. Hashimoto Proc. of ICPE2018 B-5-12 2018/11
  •  Electrical Discharge Machining of Micro-rods Using High Electric Resistance Electrodes and Piezoelectric Positioning Stage R. Hayashi, T. Koyano, A. Hosokawa, T. Furumoto, Y. Hashimoto Proc. of ICPE2018 B-5-19 2018/11
  •  Permeability of Release Agent inside the Porous Structure Built by Metal-based Additive Manufacturing T. Furumoto, et al. Proc. of ICMDT2019 FR-D-2-1 2019/04
  •  Relashionship between spatter particle behavior and volume specific energy density in SLM process K. Oishi, T. Furumoto, et al. Proc. of ICMDT2019 FR-D-2-2 2019/04
  •  Surface Texturing of Tungsten Carbide Cutting Tools by Electrochemical Machining T. Koyano, M. Takabatake, A. Hosokawa, T. Furumoto, Y. Hashimoto Proc. of ASPEN2019 B31 2019/11
  •  Investigation on force acting on workpiece with respect to actual amount of abrasive media on the workpiece in dry gyro barrel finishing Y. Hashimoto, T. Ito, Y. Nakayama, T. Furumoto, et al. Proc. of ASPEN2019 A07 2019/11
  •  Study on material property of dental hard tissue:Evaluation of non-carious lesion H. Ohura, T. Furumoto, et al. Proc. of ASPEN2019 P05 2019/11
  •  Investigation of Contact Force between Cylindrical Workpiece and Abrasive Media in Gyro Finishing Process T. Ito, Y. Hashimoto, Y. Nakayama, T. Furumoto, et al.  Proc. of ISAAT2019 2019/12
  •  Mechanical and Tribological Characteristics of VN and VN/AlCrN Multilayer PVD Coating Films for Cutting Tools R. Saito, A. Hosokawa, T. Koyano, T. Furumoto, Y. Hashimoto Proc. of ISAAT2019 2019/12
  •  Experimental Investigation Into the Spatter Particle Behaviour of Maraging Steel During Selective Laser Melting  T. Furumoto, K. Egashira, K. Oishi, S. Abe, M. Yamaguchi, Y. Hashimoto, T. Koyano, A. Hosokawa Proc. of LEMP2020 2020/06
  •  Investigation of Orthogonal Turn-Milling for Higher Machining Efficiency and Accuracy: Relationship Between Material Removal Rate and Measured Tool Flank Temperature K. Shimanuki, A. Hosokawa, T. Koyano, T. Furumoto, Y. Hashimoto Proc. of LEMP2020 2020/06
  •  Experimental investigation of torques acting on upper and lower platens in double-sided lapping R. Ozaki, Y. Hashimoto, H. Hashimoto, T. Furumoto, T. Koyano, A. Hosokawa Proc. of ICPE2020 116-117 2020/11
  •  Influence of laser power on spatter particle generation in Powder Bed Fusion process K. Oishi, T. Furumoto, S. Abe, Y. Hashimoto, T. Koyano, A. Hosokawa Proc. of ICPE2020 148-149 2020/11
  •  Improvement of processing time by utilizing cover plate in gyro barrel finishing Y. Nakayama, Y. Hashimoto, T. Ito, T. Furumoto, T. Koyano, A. Hosokawa Proc. of ICPE2020 124-125 2020/11
  •  Turning of Difficult-to-machine Materials with High Pressure Coolant A. Hosokawa, K. Kuwabara, K. Kosugi, T. Koyano, T. Furumoro, Y. Hashimoto Proc. of ICPE2020 399-400 2020/11
  •  Laser scan strategy for isotropic residual stress distribution and reduction of warpage in powder bed fusion A. Ezura, S. Abe, T. Furumoto, et al. Proc. of the 16th CHINA-JAPAN International Conference on Ultra-Precision Machining Process (CJUMP) 2021/11
  •  Study on finishing characteristics with free abrasive grains and cooling performance of channels with various cross-sectional shapes K. Kushima, T. Furumoto, et al. Proc. of LEM21 2021/11
  •  Melt pool behaviour during laser powder bed fusion process, Influence of laser incident angle on the scattering of spatter particles K. Tsubouchi, T. Furumoto, et al. Proc. of LEM21 2021/11
  •  Improvement of Finishing Speed by Using Side Cover Plates in Gyro Finishing Y. Nakayama, Y. Hashimoto, T. Furumoto, et al. Proc. of ISAAT2021 2021/11
  •  Observation of slurry behavior between workpiece and upper platen in Double-sided Lapping T. Sasaki, Y. Hashimoto, T. Furumoto, et al. Proc. of ISAAT2021 2021/11
  •  Overhang shape in metal addition manufacturing of molds with topology-optimized cooling channels A. Ezura, H. Suzuki, S. Abe, T. Furumoto, J. Sakamoto Proc. of ACSMO2022 2022/04
  •  Development of multi-layer PVD coating film with high-temperature lubricity and heat resistance and their application to cutting tools A. Hosokawa, T. Uno, T. Koyano, T. Furumoto, Y. Hashimoto Proc. of ICPE2022 C277 2022/11/30
  •  Temperature Measurement of Wire Electrode during Wire Electrical Discharge Machining Using Two-color Pyrometer with Optical Fiber T. Hinata, T. Koyano, A. Hosokawa, T. Furumoto, Y. Hashimoto, M. Yamaguchi, S. Abe Proc. of ICPE2022 C264 2022/11/30
  •  Effects of Voltage Pulse Conditions on Electrochemical Machining of Cemented Carbide T. Koyano, T. Hokin, A. Hosokawa, T. Furumoto, Y. Hashimoto, M. Yamaguchi, S. Abe Proc. of ICPE2022 C271 2022/11/30
  •  Effect of laser wet remelting on surface roughness and tribology behavior of maraging steel built by powder bed fusion A. Ezura, S. Abe, T. Furumoto, J. Sakamoto Proc. of ICPE2022 C130 2022/11/30
  •  Effective removal of support structures constructed by PBF process using gyro finishing K. Yamaya, Y. Hashimoto, T. Furumoto, M. Yamaguchi, T. Koyano, A. Ezura, A. Hosokawa Proc. of ICPE2022 C140 2022/11/30
  •  Novel drag finishing machine for less variation in finishing speed A. Kutsuna, Y. Hashimoto, T. Furumoto, M. Yamaguchi, T. Koyano, A. Ezura, T. Kawahara, A. Sekiya, A. Hosokawa Proc. of ICPE2022 C149 2022/11/30
  •  The effect of oxygen in the shielding gas on building properties for laser powder bed fusion of aluminum alloy K. Kushima, T. Furumoto, Y. Ono, T. Oyama Proc. of ICMDT2023 28 2023/03/08
  •  Simulation of wire electrode temperature in wire electrical discharge machining based on temperature measurement resulted byteo-color pyrometer with optical fiber T. Hinata, T. Koyano, T. Furumoto, Y. Hashimoto, M. Yamaguchi 28 2023/11
  •  Multiphysics Simulation of Micro Electrochemical Machining Including Circuit Analysis of Pulse Power Supply T. Koyano, T. Furumoto Proc.of ASPEN2023 95 2023/11
  •  Droplet control for development of spatterless building technology in powder bed fusion S. Kajimoto, T. Furumoto, S. Abe, M. Yamaguchi, Y. Hashimoto, T. Koyano Proc. of ISAAT2023 115 2023/11
  •  Surface Modification of Cooling Channel inside the Die Casting Dies with Free Abrasive Grains, Evaluation of Spot Cooling Channel T. Furumoto, Y. Ochiai, M. Tsuji, S. Inagaki 2016 Japan Die Casting Congress Transactions 29-34 2016/11
  •  Building and Improvement of High Performance Mold by Metal-based Additive Manufacturing T. Furumoto Journal of the Japan Society of Polymer Processing  29 9 316-319 2017/08/20
  •  レーザを用いた硬脆材料の熱応力割断 60 6 16-21 2019/06

Conference Presentations

  • Study on Laser Assisted Milling of Consolidated Structure with the Layered Manufacturing Process(conference:The 33rd Rapid Prototyping Symposium in Japan)(2009)
  • Study on Milling-combined Laser Consolidation System, For the Advanced Injection Mold by Additive Manufacturing(conference:ISUPEN2013)(2013)
  • Visualization of additive manufacturing processes(conference:7th Industrial Laser Application Symposium)(2021/03/24)
  • Fabrication of release agent supply die with porous structure using metal-based additive manufacturing with laser beam(conference:37th International Conference of the Polymer Processing Society)(2022/04/14)
  • Distinctive gas solutions for sustainable metal additive manufacturing(conference:FORMNEXT 2022, TCT conference)(2022/11/15)

show all

  • 金属3Dプリンタがもたらす「ものづくり」の変革に向けて (2023/02/16)
  • 金属AMの現在地と金型製作への展開 (2023/11/24)

Others

  •  Advanced Dental Treatment with Nd:YAG Laser T. UEDA, T. FURUMOTO Japan Laser Processing Society 15 1 22-27 2008/01
  •  Study on Laser Assisted Milling of Consolidated Structure with the Layered Manufacturing Process T. FURUMOTO, T. UEDA 107-112 2009/06
  •  Study on Laser Assisted Milling of Consolidated Structure with T. Furumoto, T. Ueda 107-112 2009/07

Arts and Fieldwork

Patent

Theme to the desired joint research

Grant-in-Aid for Scientific Research

○「レーザ歯科治療における酸化チタン粉末の殺菌とその作用メカニズムに関する研究」(2007-2008) 
○「レーザー光と酸化チタン粉末の併用による殺菌効果発現のメカニズム解明に関する研究」(2009-2010) 
○「粉末による細菌の凝集システム構築とレーザー照射に起因した殺菌機序解明に関する研究」(2011-2013) 
○「レーザー照射部温度のインプロセスモニタリングによるハイブリッド歯冠形成法の確立」(2014-2016)
○「非う蝕性歯質欠損のin vitroによる発生機序解明に関する研究」(2017-2019) 
○「粉末の溶融凝固現象の把握に基づく品質を保証する造形条件設定指針の構築」(2021-2023) 
○「砥石作業面のレーザコンディショニングを併用した研削焼入れの実現」(2006-2007) 
○「レーザによる摺動面のマイクロパターニングに関する研究」(2006-2008) 
○「フリーカーボンを含有させた低摩擦コーティング膜の開発とその難削材加工への適用」(2010-2011) 
○「ホロカソード放電型スパッタ装置によるフリーカーボン含有高潤滑コーティング膜の創成」(2012-2014) 
○「強ねじれエンドミルによる傾斜切削と発生ガス分析によるCFRPの高品位加工」(2013-2014)
○「窒化バナジウムを含有する高温潤滑複合コーティング膜の開発とその難削材加工への適用」(2018-2020) 

Competitive research funding,Contribution

Collaborative research,Consignment study

Classes (Bachelors)

○Lecture on Life in Campus and Society(2017)
○Laser Technology(2017)
○Machining Exercise(2017)
○Manufacturing Systems Engineering(2017)
○Problem-Based Learning in Mechanical Systems Engineering(2017)
○Laser Technology(2017)
○Lecture on Life in Campus and Society(2016)
○Manufacturing Systems Engineering(2016)
○Machining Exercise(2016)
○Problem-Based Learning in Mechanical Systems Engineering(2016)
○Laser Technology(2016)

Classes (Graduate Schools)

○High Energy Beam Machining A(2017)
○Manufacturing Technology(2017)
○Manufacturing Technology(2017)
○Manufacturing Technology(2017)
○Manufacturing Technology(2017)
○High Energy Beam Machining A(2017)
○High Energy Beam Machining B(2017)
○High Energy Beam Machining B(2017)
○Machining Technology(2017)
○High Energy Beam Machining B(2016)
○High Energy Beam Machining A(2016)
○Machining Technology(2016)
○Manufacturing Technology(2016)

International Project

International Students

Lecture themes

Others (Social Activities)

To Page Top