本文へジャンプ

研究者情報

データ更新日:2024年01月08日

小谷野 智広 (こやの ともひろ) 准教授 KOYANO, Tomohiro

メール 研究室ウェブサイト

所属組織・役職等

理工研究域 機械工学系

教育分野

【学士課程】
理工学域 機械工学類 機械創造コース
【大学院前期課程】
自然科学研究科 機械科学専攻
【大学院後期課程】
自然科学研究科 機械科学専攻

所属研究室等

生産加工システム研究室

学歴

【取得学位】
博士(工学)

職歴

日本学術振興会  特別研究員(2012/04/01-2013/03/31)

生年月

所属学会

精密工学会 アフィリエイト(2013-2021)
CIRP
日本機械学会
砥粒加工学会
電気加工学会

学内委員会委員等

受賞学術賞

○電気加工学会全国大会賞(2020/11/20)
○日本機械学会奨励賞(研究)(2019/04/18)
○Young Researcher Award(2017/11/15)

専門分野

生産工学・加工学

専門分野キーワード

放電加工、電解加工、切削加工

研究課題

著書

論文

  • Electrochemical Milling Using a Parallel Mechanism for High-speed Translation of Tool Electrodes Tomohiro Koyano, Takuto Honda, Akira Hosokawa, Tatsuaki Furumoto International Journal of Electrical Machining 26巻 2021/03 査読有 原著論文 研究論文(学術雑誌)
  • CO2 laser cleavage of chemically strengthened glass TatsuakiFurumoto, Yohei Hashimoto, Hisashi Ogi, Tomoya Kawabe, Mitsugu Yamaguchi, Tomohiro Koyano, Akira Hosokawa Journal of Materials Processing Technology 289巻 2021/03 査読有 原著論文 研究論文(学術雑誌)
  • Studies on high-efficiency and high-precision orthogonal turn-milling -The effects of relative cutting speed and tool axis offset on tool flank temperature- Precision Engineering 66巻 180-187頁 2020/11/01 査読有 原著論文 研究論文(学術雑誌)
  • One-process Surface Texturing of a Large Area by Electrochemical Machining with Short Voltage Pulses Tomohiro Koyano, Akira Hosokawa, Taishi Takahashi, Takashi Ueda CIRP Annals 68巻 1号 181-184頁 2019/08 査読有 原著論文
  • Microstructure of built part obtained by powder bed fusion process with metal Tatsuaki Furumoto, Kyota Egashira, Souta Matsuura, Makoto Nikawa, Masato Okada, Tomohiro Koyano, Yohei Hashimoto, Akira Hosokawa Key Engineering Materials 825巻 1-6頁 2019/10 査読有 原著論文

全て表示

  • Study on high quality thermal stress cleavage of thick sapphire wafer Tomoya Kawabe, Tatsuaki Furumoto, Yohei Hashimoto, Tomohiro Koyano, Yuzo Ochi, Kentaro Oguchi, Yuji Chino, Akira Hosokawa Key Engineering Materials 825巻 39-44頁 2019/10 査読有 原著論文
  • Studies on Eco-Friendly Grinding with an Extremely Small Amount of Coolant – Applicability of Contact-Type Flexible Brush-Nozzle – Akira Hosokawa, Ryosuke Shimizu, Takahiro Kiwata, Tomohiro Koyano, Tatsuaki Furumoto, Yohei Hashimoto International Journal of Automation Technology 13巻 5号 648-656頁 2019/09 査読有 原著論文
  • Formation Mechanism of Pores Inside Structure Fabricated by Metal-Based Additive Manufacturing Kyota Egashira, Tatsuaki Furumoto, Kiichi Hishida, Satoshi Abe, Tomohiro Koyano, Yohei Hashimoto, Akira Hosokawa International Journal of Automation Technology 13巻 3号 330-337頁 2019/05 査読有 原著論文
  • Micro-Electrical Discharge Machining of Micro-Rods Using Tool Electrodes with High Electrical Resistivity Tomohiro Koyano, Yuki Sugata, Akira Hosokawa, Tatsuaki Furumoto Precision Engineering 55巻 95-100頁 2019/01 査読有 原著論文
  • Analysis of electrochemical machining process with ultrashort pulses considering stray inductance of pulse power supply Tomohiro Koyano, Akira Hosokawa, Tatsuaki Furumoto Journal of Advanced Mechanical Design, Systems, and Manufacturing 12巻 5号 10Pages頁 2018/10 査読有 原著論文
  • Turning of difficult-to-machine materials with an actively driven rotary tool (ADRT) -Proposition of reciprocating turning contingent on fundamental cutting characteristics- Akira Hosokawa, Haruki Yoshimatsu, Tomohiro Koyano, Tatsuaki Furumoto, Yohei Hashimoto Journal of Advanced Mechanical Design, Systems, and Manufacturing 12巻 5号 9Pages頁 2018/10 査読有 原著論文
  • Cutting characteristics of PVD-coated tools deposited by filtered arc deposition (FAD) method Akira Hosokawa, Goushi Hoshino, Tomohiro Koyano, Takashi Ueda CIRP Annals 67巻 1号 83-86頁 2018/08 査読有 原著論文
  • Electrochemical machining using porous electrodes fabricated by powder bed fusion additive manufacturing process CIRP Annals 66巻 1号 213-216頁 2017/08 査読有 原著論文
  • レーザを用いた積層ウエハの熱応力割断 -ガラス/シリコン積層ウエハ内部のき裂進展メカニズム-  古本達明,藤澤和人,細川 晃,小谷野智広,上田隆司  精密工学会誌 83巻 2号 167-172頁 2017/02 査読有 原著論文
  • Study on deformation restraining of metal structure fabricated by selective laser melting Journal of Materials Processing Technology 245巻 207-214頁 2017/02 査読有 原著論文
  • Evaluation of the Minimum Quantity Lubrication in Orthogonal Cutting with the Application of Finite Element Method International Journal of Mechanical & Mechatronics Engineering 17巻 1号 104-109頁 2017/02 査読有 原著論文
  • Micro Electrical Discharge Machining Using High Electric Resistance Electrodes Tomohiro KOYANO, Yuki SUGATA, Akira HOSOKAWA, Tatsuaki FURUMOTO Precision Engineering 47巻 480-486頁 2017/01 査読有 原著論文
  • Drastic reduction of grinding fluid flow in cylindrical plunge grinding by means of contact-type flexible brush-nozzle  Akira Hosokawa, Keita Tokunaga, Takashi Ueda, Takahiro Kiwata, Tomohiro Koyano  CIRP Annals 65巻 1号 317-320頁 2016/06 査読有 原著論文
  • High-Quality End Milling of CFRP – Inclination Milling with High-Helix End Mill – Akira Hosokawa, Naoya Hirose, Takashi Ueda, Tomohiro Koyano, Tatsuaki Furumoto International Journal of Automation Technology 10巻 3号 372-378頁 2016/05 査読有 原著論文
  • Cutting performance of CBN and diamond tools in dry turning of cemented carbide  Mechanical Engineering Journal 3巻 1号 1-9頁 2016/01 査読有 原著論文
  • CO2レーザ照射時の歯質除去機構  辺見慎吾, 古本達明, 細川晃, 小谷野智広, 上田隆司 砥粒加工学会誌 59巻 3号 145-147頁 2015 査読有 原著論文
  • Influence of External Hydrostatic Pressure on Machining Characteristics of Electrical Discharge Machining  CIRP Annals 64巻 1号 229-232頁 2015 査読有 原著論文
  • Micro electrochemical machining using electrostatic induction feeding method CIRP Annals 62巻 1号 175-178頁 2013 査読有 原著論文
  • Electrochemical Micromachining Using Electrostatic Induction Feeding Method Tomohiro Koyano, Masanori Kunieda Key Engineering Materials 523-524巻 305-309頁 2012 査読有 原著論文
  • Electrolysis Free Micro EDM in Water Using Electrostatic Induction Feeding Method Tomohiro Koyano, Masanori Kunieda Journal of Advanced Mechanical Design, Systems, and Manufacturing 6巻 6号 800-807頁 2012 査読有 原著論文
  • Micro EDM by Stray-Capacitance-Coupled Electric Feeding Tomohiro Koyano, Masanori Kunieda Key Engineering Materials 516巻 245-250頁 2012 査読有 原著論文
  • Reduction of Tool Wear in Non-contact Electrostatic Induction Feeding EDM Yuna Yahagi, Wataru Natsu, Tomohiro Koyano, Masanori Kunieda  International Journal of Electrical Machining 17巻 23-27頁 2012 査読有 原著論文
  • 静電誘導給電による高速回転電極を用いた微細放電加工 矢萩 優名, 小谷野 智広, 国枝 正典, 楊 暁冬 精密工学会誌 77巻 4号 394-399頁 2011 査読有 原著論文
  • 静電誘導給電法を用いた微細放電加工の加工安定性の向上 小谷野 智広, 国枝 正典 精密工学会誌 76巻 10号 1156-1160頁 2010 査読有 原著論文
  • High Spindle Speed Wire Electrical Discharge Grinding Using Electrostatic Induction Feeding Method Yuna Yahagi, Tomohiro Koyano, Masanori Kunieda, Xiaodong. Yang Key Engineering Materials 447-448巻 268-271頁 2010 査読有 原著論文
  • Achieving High Accuracy and High Removal Rate in Micro-EDM by Electrostatic Induction Feeding Method Tomohiro Koyano, Masanori Kunieda CIRP Annals 59巻 1号 219-222頁 2010 査読有 原著論文
  • Internal face finishing for a cooling channel using a fluid containing free abrasive grains Mitsugu Yamaguchi, Tatsuaki Furumoto, Shuuji Inagaki, Masao Tsuji, Yoshiki Ochiai, Yohei Hashimoto, Tomohiro Koyano, Akira Hosokawa The International Journal of Advanced Manufacturing Technology 2021/03/17 査読有 原著論文 研究論文(学術雑誌)
  • Effects of the powder morphology, size distribution, and characteristics on the single track formation in selective laser melting of H13 steel Mitsugu YAMAGUCHI, Tatsuaki FURUMOTO, Yuuya TANABE, Shinnosuke YAMADA, Mototsugu OSAKI, Yohei HASHIMOTO, Tomohiro KOYANO, Akira HOSOKAWA Journal of Advanced Mechanical Design, Systems, and Manufacturing 15巻 3号 2021/06 査読有 原著論文 研究論文(学術雑誌)
  • Study on the relationship between material removal rate and tool flank temperature in orthogonal turn-milling Koji Shimanuki, Akira Hosokawa, Tomohiro Koyano, Tatsuaki Furumoto, Yohei Hashimoto Journal of Advanced Mechanical Design, Systems, and Manufacturing 15巻 4号 2021/06 査読有 原著論文 研究論文(学術雑誌)
  • Experimental investigation into the spatter particle behavior of maraging steel during selective laser melting Tatsuaki FURUMOTO, Kyota EGASHIRA, Kazushi OISHI, Satoshi ABE, Mitsugu YAMAGUCHI, Yohei HASHIMOTO, Tomohiro KOYANO and Akira HOSOKAWA Journal of Advanced Mechanical Design, Systems, and Manufacturing 15巻 4号 2021/06 査読有 原著論文 研究論文(学術雑誌)
  • Thermal stress cleavage of a single-crystal round sapphire bar by carbon dioxide laser Tatsuaki Furumoto, Ryuya Saito, Kota Watanabe, Yuzo Ochi, Yohei Hashimoto, Mitsugu Yamaguchi, TomohiroKoyano, Akira Hosokawa Journal of Materials Processing Technology 297巻 2021/11 査読有 原著論文 研究論文(学術雑誌)
  • 電解加工を用いた一括表面テクスチャリングにおけるテクスチャの微細化 小谷野 智広, 高橋 克成, 細川 晃, 古本 達明, 橋本 洋平 電気加工学会誌 56巻 141号 2022/03 査読有 原著論文 研究論文(学術雑誌)
  • Analytical Investigation of the Influence of Machining Area in Electrochemical Machining with Short Voltage Pulses Tomohiro Koyano, Yusuke Shibuya, Tatsuaki Furumoto, Akira Hosokawa International Journal of Electrical Machining 28巻 13-19頁 2023/03 査読有 原著論文
  • Improvement of Machining Accuracy by Controlling the Pulse Voltage On-time in Electrochemical Milling with High-speed Scanning Tomohiro Koyano, Shunta Notake, Tatsuaki Furumoto, Akira Hosokawa International Journal of Electrical Machining 28巻 7-12頁 2023/03 査読有 原著論文

講演・口頭発表等

  • Effects of Voltage Pulse Conditions on Electrochemical Machining of Cemented Carbide (会議名:19th International Conference on Precision Engineering (ICPE2022))(2022/11/30)
  • Temperature Measurement of Wire Electrode during Wire Electrical Discharge Machining Using Two-color Pyrometer with Optical Fiber(会議名:19th International Conference on Precision Engineering (ICPE2022))(2022/11/30)
  • Surface quality improvement of electrochemical machining using porous elec-trodes by mixing bubbles into electrolyte(会議名:18th International Symposium on Electrochemical Machining Technology (INSECT))(2022/11/15)
  • Measurement of Wire Electrode Temperature in Wire Electrical Discharge Machining by Two-color Pyrometer with Optical Fiber(会議名:21st CIRP Conference on Electro Physical and Chemical Machining (ISEMXXI))(2022/06/16)
  • 高速パラレルメカニズムを用いたNC電解加工の研究(会議名:第231回電気加工研究会)(2021/05/20)

全て表示

  • 光ファイバ型2色温度計によるワイヤ放電加工中のワイヤ温度計測(会議名:第232回電気加工研究会)(2021/06/30)
  • 切削工具用超硬合金の高精度電解加工の研究(会議名:2021年度精密工学会秋季大会学術講演会)(2021/09/21)
  • 高速パラレルメカニズムを用いたNC電解加工による3次元加工(会議名:2021年度精密工学会秋季大会学術講演会)(2021/09/21)
  • 微細粒子への容量結合給電による多点同時放電加工の試み(会議名:2021年度精密工学会北陸信越支部学術講演会)(2021/11/13)
  • パラレルメカニズムを用いた高速走査NC電解加工による3次元加工(会議名:電気加工学会全国大会(2021))(2021/11/25)
  • パラレルメカニズムを用いたNC電解加工の高精度化(会議名:第29回「精密工学会 学生会員卒業研究発表講演会論文集」)(2022/03/15)
  • 電解加工を用いた大面積一括表面テクスチャリングにおけるテクスチャの微細化(会議名:電気加工学会全国大会(2019))(2019/11/22)
  • Wire Temperature Measurement during Wire Electrical Discharge Machining Using Two-color Pyrometer with Optical Fiber(会議名:電気加工学会全国大会(2019))(2019/11/21)
  • ポーラス電極を用いた電解加工における加工面性状の改善(会議名:2019年度精密工学会北陸信越支部学術講演会)(2019/11/09)
  • 高抵抗電極を用いた微細軸の放電加工(会議名:2019年度精密工学会秋季大会学術講演会)(2019/09/04)
  • ポーラス電極を用いた電解加工—電解液への気泡混入による加工面性状の向上—(会議名:2020年度精密工学会春季大会学術講演会)(2020/03/17)
  • Miniaturization of micro EDM using high electric resistance electrode (2015)
  • Study on Thermal Stress Cleavage of Chemically Strengthened Glass by CO2 Laser Beam(2016/04/20)
  • 金属粉末積層造形によるポーラス電極を用いた放電加工(会議名:2016年度砥粒加工学会学術講演会)(2016/08/31)
  • パラレルメカニズムを用いたNC電解加工(会議名:2016年度精密工学会北陸信越支部学術講演会)(2016/11/12)
  • 極微細軸を工具電極に用いた微細穴の放電加工(会議名:2020年度精密工学会北陸信越支部学術講演会)(2020/11/07)
  • 電解液への気泡混入によるポーラス電極を用いた電解加工特性の向上(会議名:2020年度精密工学会秋季大会)(2020/09/01)
  • 高速パラレルメカニズムを用いたNC電解加工(会議名:電気加工学会全国大会(2020))(2020/11/20)
  • Numerically Controlled Electrochemical Machining Using a Parallel Mechanism(会議名:20th CIRP Conference on Electro Physical and Chemical Machining (ISEM2020))(2021/01/20)
  • Ultra-Short Pulse ECM using Electrostatic Induction Feeding Method (2013/04)
  • Fabrication of Micro Rods by EDM Using High Electric Resistance Electrode(2016/11/16)
  • Study on the Effect of External Hydrostatic Pressure on Electrical Discharge Machining(2016/04/19)
  • Machining of Difficult-to-Machine Materials by PVD coated End Mills(2016/11/15)
  • Study on High Efficiency Cutting of SiC-based Ceramic Matrix Composites -Application of Diamond Coated Carbide End Mill-(2016/11/15)
  • 電解加工による微細表面テクスチャリング(会議名:電気加工学会全国大会(2018))(2018/11/30)
  • 電解加工による大面積微細テクスチャリングの試み(会議名:2018年度精密工学会春季大会)(2018/03/16)
  • 光ファイバ型赤外線輻射温度計によるワイヤ放電加工中のワイヤ電極温度測定の試み(会議名:第221回電気加工研究会)(2017/07/28)
  • Electrochemical Machining with Porous Electrode Fabricated by Additive Manufacturing(2016/11/14)
  • 短パルス電解加工における加工精度の検討(会議名:2017年度精密工学会北陸信越支部学術講演会)(2017/11/25)
  • 微細噴流穴からの電解液供給による電解加工(会議名:電気加工学会全国大会(2017))(2017/11/30)
  • パラレルメカニズムを用いた電極高速走査による電解加工(会議名:第227回電気加工研究会)(2019/07/26)
  • Surface Texturing of Tungsten Carbide Cutting Tools by Electrochemical Machining(会議名:8th International Conference of Asian Society for Precision Engineering and Nanotechnology (ASPEN2019))(2019/11/14)
  • 光ファイバ型2色温度計を用いたワイヤ放電加工におけるワイヤ電極温度計測(会議名:第224回電気加工研究会)(2018/08/03)
  • 電解加工により表面テクスチャを付与した超硬工具による旋削加工(会議名:2018年度精密工学会秋季大会学術講演会)(2018/09/07)
  • ⾼抵抗電極を⽤いた微細放電加⼯ −ピエゾステージと低電源電圧を⽤いた微細化限界の向上−(会議名:2018年度精密工学会北陸信越支部学術講演会)(2018/11/10)
  • Temperature Measurement of Wire Electrode in Wire EDM by Two-color Pyrometer(会議名:19th CIRP Conference on Electro Physical and Chemical Machining(ISEM19))(2018/04/24)
  • Electrical Discharge Machining of Micro-rods Using High Electric Resistance Electrodes and Piezoelectric Positioning Stage (会議名:17th International Conference on Precision Engineering (ICPE2018))(2018/11/15)
  • Micro Texturing by Electrochemical Machining with Short Voltage Pulses(会議名:17th International Conference on Precision Engineering (ICPE2018))(2018/11/14)

その他(報告書など)

  • 第69回CIRP総会報告 小谷野智広 電気加工学会誌 53巻 134号 189-192頁 2019/11 ⑬会議報告書等
  • 短パルス電源を用いた電解加工による大面積一括微細表面テクスチャリング 小谷野智広 精密工学会誌 85巻 11号 961-964頁 2019/11 ⑥総説・解説(学術雑誌)
  • 光ファイバ型2色温度計を用いたワイヤ放電加工中のワイヤ電極温度計測 小谷野智広 電気加工会誌 53巻 133号 112-115頁 2019/07 ⑥総説・解説(学術雑誌)
  • 金属AMにより製作したポーラス電極を用いた電解加工 小谷野智広 砥粒加工学会誌 63巻 7号 361-364頁 2019/07 ⑥総説・解説(学術雑誌)
  • 光ファイバ型2色温度計によるワイヤ放電加工中のワイヤ電極温度計測 小谷野 智広,細川 晃,古本 達明 型技術 33巻 7号 22-25頁 2018/06 ⑨総説・解説(商業誌)

芸術・フィールドワーク

特許

○電解加工用電極及び電解加工用電極の製造方法

共同研究希望テーマ

科研費

○基盤研究(C)(一般)「パラレルメカニズムを用いた高速走査NC電解加工による3次元複雑形状加工」(2022-2024) 代表者
○基盤研究(C)(一般)「電解加工による大面積一括表面テクスチャリングの実現とその切削工具への応用」(2019-2021) 代表者
○若手研究(B)「金属AMを用いた電解加工用ポーラス電極の開発」(2017-2018) 代表者
○若手研究(B)「高抵抗材料を用いたナノ放電加工の実現に関する研究」(2015-2016) 代表者
○研究活動スタート支援「短パルスを用いた微細ワイヤ電解加工の高精度・高能率化」(2013-2014) 代表者

競争的資金・寄付金等

共同研究・受託研究実績

A-STEP採択課題

学域・学類担当授業科目

○生産工学A(2020)
○データサイエンス基礎(2020)
○機械工作実習(2020)

大学院担当授業科目

○電気加工学特論A(2020)
○電気加工学特論B(2020)
○機械加工学(2020)

他大学の客員教授

教育活動(FD)に関する研究

国際事業協力

留学生参加の社会活動

審議会等の参加

講演可能なテーマ

その他公的社会活動

このページの先頭へ