Jump to contents

Researcher Information

last modified:2017/06/08

Professor TANAKA Yasunori

Mail Laboratory Website

Faculty, Affiliation

Faculty of Electrical and Computer Engineering, Institute of Science and Engineering

College and School Educational Field

Division of Electrical Engineering and Computer Science, Graduate School of Natural Science and Technology
Division of Electrical Engineering and Computer Science, Graduate School of Natural Science and Technology
School of Electrical and Computer Engineering, College of Science and Engineering

Laboratory

Electric Power and Environment Laboratory TEL:076-234-4846 FAX:076-234-4846

Academic Background

【Academic background(Doctoral/Master's Degree)】
Nagoya University Doctor Electrical Engineering 199503 Completed
Nagoya University Doctor Electrical Engineering 199803 Completed
【Academic background(Bachelor's Degree)】
Nagoya University Department of Electrical Engineering 199303
【Degree】
Doctor of Engineering

Career

Kanazawa University Faculty of Engineering(1998/04/01-2000/03/31)
Kanazawa University Natural Science and Technology(2000/04/01-2002/07/31)
Kanazawa University Faculty of Engineering(2002/08/01-2004/03/31)
Kanazawa University Div. of Natural Science and Technology(2004/04/01-2008/03/31)
University of California at San Diego Dept. of Mechanical and Aerospace Eng. Visiting Scholar(2005/06/24-2005/08/07)
University of California at San Diego Dept. Mechanical and Aerospace Eng. Visiting Scholar(2006/09/22-2006/10/22)
University of Toronto Centre for Advanced Coating Technologies Visiting Scientist(2007/07/01-2008/01/15)
Kanazawa University Faculty of Electrical and Computer Eng.(2008/04/01-2010/03/31)
Kanazawa University Faculty of Electrical and Computer Eng.(2010/04/01-)

Year & Month of Birth

1970/11

Academic Society

IEEJ
JSPS-153 committee
IEEJ
The Japan Society of Plasma Science and Nuclear Fusion Research
JSME
IEEJ
IEEJ
IEEJ
IEEJ
IEEJ
IEEJ
IEEJ
JSME
JPFR
IEEJ

Award

○ISPlasma2015/IC-PLANTS2015 Best Presentation Award (Oral)(2015/03/28)
○ISPlasma2015/IC-PLANTS2015 Best Presentation Award (Oral)(2015/03/28)
○ISPlasma2015/IC-PLANTS2015 Best Presentation Award (Oral)(2015/03/28)
○ISPlasma2015/IC-PLANTS2015 Best Presentation Award (Oral)(2015/03/28)
○The leading paper published in Journal of Physics D: Applied Physics in 2004(2005/06/01)
○Paper Award of 7th Asia-Pacific Conf. on Plasma Sci. & Tech.(2004/07/02)
○Paper Presentation Award of IEEJ(2003/05/05)
○Paper Presentation Award of IEEJ(2003/05/05)
○Paper Presentation Award of IEEJ(2001/08/01)
○Paper Presentation Award of IEEJ(2001/04/01)
○Paper Presentation Award of IEEJ(2001/05/01)
○Paper Presentation Award of IEEJ(1997/05/01)
○Paper Presentation Award of IEEJ(1995/05/10)
○Paper Presentation Award of IEEJ(1994/05/10)
○Paper Presentation Award of IEEJ(1994/05/10)
○Paper Presentation Award of IEEJ(1994/05/10)
○Paper Presentation Award of IEEJ(1994/05/10)
○Paper Presentation Award of IEEJ(1994/05/10)
○Paper Presentation Award of IEEJ(1994/05/10)
○Paper Presentation Award of IEEJ(1994/05/10)
○Paper Presentation Award of IEEJ(1994/05/10)
○Research Foundation for the Electrotechnology of Chubu(2009/04)
○Research Grants in the Natural Sciences, The Mitsubishi Foundation(2008/09/10)
○Financial support for research by Naitou-zaidan(2006/04/01)
○Financial support for research by Seki-zaidan(2003/01/31)
○Financial support for research by tanigawa-zaidan(2003/10/01)
○Financial support for research by Saneyoshi-zaidan(2002/10/01)
○Financial support for research by Yazaki-zaidan(2002/04/01)

Specialities

Power engineering/Power conversion/Electric machinery、Plasma science

Speciality Keywords

Thermal Plasma, Arc, Arc Interruption, Circuit Breaker, Induction Thermal Plasma, Numerical Simulation, Nanoparticle Synthesis

Research Themes

Developlment of High-Speed High-Efficient Technique of Nanoparticle Synthesis using Modulated Induction Thermal Plasmas

Development of high-speed non-equilibrium prcessings using PMITP

Development of Loop/Planar type of High-Pressure High-Temperature Modulated Plasmas

Study on High Current Arc Interruption Phenomena

Books

  •  Innovative materials processing by controlling chemical reaction field 2004/01
  •  Fundamental technologies of arc and glow discharges ? investigations on recent technologies over whole fields of these discharges- IEEJ 2006/09
  •   Investigating R&D Committee on application technologies of arc and glow discharges  IEEJ 2012/12

Papers

  •  Numerical simulation on dynamics and thermal decomposition of spallation polymer particles flying in polymer ablated arcs  T.Nakagawa, T. Nakano, Y.Tanaka, Y.Uesugi, T.Ishijima Trans.IEEJ PE 135 11 2015/11
  •  Analysis of the three-dimensional trajectories of dusts observed with a stereoscopic fast framing camera in the Large Helical Device  M. Shoji, S. Masuzaki, Y. Tanaka, A.Yu. Pigarov, R.D. Smirnov, G. Kawamura, Y. Uesugi, H. Yamada, The LHD Experiment Group J. Nuclear Materials 463 861-864 2015/08
  •  Thomson scattering diagnostics of SF6 gas-blasted arcs confined by a nozzle under free-recovery conditions  K.Tomita, D.Gojima, T.Shimizu, K.Uchino, T.Nakano, Y.Tanaka, K.Suzuki, T.Iijima, and T.Shinkai J. Phys. D: Appl. Phys. 48 26 265201 2015/05
  •  Fundamental Investigation Technique on Gas-Blast Arc Behaviors in Decaying and Re-ignition Processes using Power Semiconductors  Y.Tanaka, T.Nakano, H.Shimizu, K.Tomita, K.Suzuki Trans. IEEJ PE 135 11 2015/11
  •  Characteristic Analysis of low Pressure Dielectric Barrier Discharges Generated by Using Silicon Diode for Alternating Current  Y.Heira, Y.Uesugi, Y.Tanaka, T.Ishijima Trans.IEEJ 135-A 3 182-188 2015/03

show all

  •  Two-dimensional spectroscopic observation of a pulse-modulated induction thermal plasma torch for nanopowder synthesis  N. Kodama, K. Kita, Y. Tanaka, Y. Uesugi, T. Ishijima, S.Watanabe, K. Nakamura J. Phys.: Conf. Ser. 550 012026 2014/12
  •  A method for large-scale synthesis of Al-doped TiO2 nanopowder using pulse-modulated induction thermal plasmas with time-controlled feedstock feeding  N. Kodama, Y. Tanaka, K. Kita, Y. Uesugi, T. Ishijima, S. Watanabe and K. Nakamura  J. Phys. D: Appl. Phys. 47 195304 2014/04
  •  Development of a quasi-direct temperature control system of modulated induction thermal plasmas for advanced materials processings  Y.Tanaka, Y.Tsubokawa, Y.Uesaka, Y.Uesugi Plasma Sources Sci. Technol 22 065016 2013/11
  •  Numerical simulation on quenching process of carbon dioxide arcs with hydrogen gas inclusion in different nozzle shapes  Y.Tanaka, X.Song, Y.Uesugi, S.Kaneko, S.Okabe Trans. IEE of Japan 133-PE 11 895-902 2013/11
  •  A high-speed photoresist removal process using multibubble microwave plasma under a mixture of multiphase plasma environment  T. Ishijima, K. Nosaka, Y. Tanaka, Y. Uesugi, Y. Goto, H. Horibe  Appl. Phys. Lett. 103 142101 2013/09
  •  Evaluation of extra- and intracellular OH radical generation, cancer cell injury, and apoptosis induced by a non-thermal atmospheric pressure plasma jet  K. Ninomiya, T. Ishijima, M. Imamura, T.Yamahara, H. Enomoto, K.Takahashi, Y. Tanaka, Y.Uesugi, N. Shimizu J. Phys. D: Appl. Phys. 46 425401 2013/09
  •  Experimental Study of Magnetic Arc Blow for Plasma Arc Cutting  Y.Yamaguchi, Y.Katada,Y.Ito, Y.Uesugi,Y.Tanaka, T.Ishijima J. Jpn. Welding Soc. 31 3 193-200 2013/09
  •  Thomson scattering diagnostics of decay processes of Ar/SF6 gas-blast arcs confined by a nozzle  K. Tomita, D. Gojima, K. Nagai, K.Uchino, R. Kamimae, Y.Tanaka, K.Suzuki, T.Iijima, T. Uchii, T.Shinkai J. Phys. D: Appl. Phys. 46 382001 2013/09
  •  Development of a chemically non-equilibrium model on decaying SF6 arc plasmas Y.Tanaka, K.Suzuki IEEE Trans. Power Delivery 28 4 2623-2629 2013/09
  •  Removal of carbon deposited film and hydrogen retention control by low temperature H-C-N reactive plasmas A. Sasaki, Y. Takai, Y. Uesugi, Y.Tanaka, T. Ishijima  J.Nuclear.Materials 438 S1092-S1095 2013/06
  •  Time evolution in radiation intensities of C2 and H spectra in Ar/CH4/H2 modulated induction thermal plasmas for diamond film deposition Y.Haruta, K.Fujimoto, S.Horita, Y.Tanaka, Y.Uesugi, T.Ishijima  J.Phys.Conf.Ser. 441 012017(6pp) 2013/06
  •  Temperature behavior in a tandem type of modulated induction thermal plasma for materials processings K. Kuraishi, M. Akao,Y.Tanaka, Y.Uesugi, T.Ishijima J.Phys.Conf.Ser. 441 012016(6pp) 2013/06
  •  Prompt response and durability of polymer ablation from synthetic fibers irradiated by thermal plasmas for arc resistant clothes M. Ishida, N.Shinsei,Y.Tanaka, Y. Uesugi, T. Ishijima, W. Mio, H. Hagi, K. Uchibori  J.Phys.Conf.Ser. 441 012037(6pp) 2013/06
  •  Enhancement of non-equilibrium atmospheric pressure He plasma discharges by using silicon diode for alternating current Y. Sumiishi, Y. Uesugi, Y. Tanaka, T. Ishijima J.Phys.Conf.Ser. 441 012018(6pp) 2013/06
  •  Numerical investigation of the effect of cathode holder shape on hafnium cathode evaporation for oxygen plasma cutting arc N.P.Long, Y.Tanaka, Y.Uesugi, Y.Yamaguchi  JOURNAL OF PHYSICS D-APPLIED PHYSICS 46 224012 2013/06
  •  A large amount synthesis of nanopowder using modulated induction thermal plasmas synchronized with intermittent feeding of raw materials Y. Tanaka, T. Tsuke, W. Guo, Y. Uesugi, T. Ishijima, S.Watanabe, K.Nakamura J.Phys.Conf.Ser. 406 012001(10pp) 2012/11
  •  Effect of cathode diameter and operating parameters on behavior of hafnium cathode evaporation for oxygen plasma cutting arc N.P. Long, Y. Katada, Y. Tanaka, Y. Uesugi, Y. Yamaguchi J.Phys.D:Appl.Physics 45 435203(14pp) 2012/10
  •  Simulation of arc root fluctuation in a dc non-transferred plasma torch with three dimensional modeling R.Huang, H.Fukanuma, Y.Uesugi, Y.Tanaka J. Thermal Spray Technol. 21 3-4 636-643 2012/06
  •  Numerical investigation of the swirl gas angle and arc current dependence on evaporation of hafnium cathode in a plasma cutting arc N.P.Long, Y.Tanaka, Y.Uesugi, Y.Yamaguchi IEEE Trans Plasma Sci. 40 2 497-504 2012/02
  •  Computational simulation of reactive species production by methane-air DBD at high pressure and high temperature H.Takana, Y.Tanaka, H.Nishiyama Europhysics Letters 27 25001(4pp) 2012/01
  •  Spallation particle ejection from polymer surface irradiated by thermal plasmas Y.Tanaka, N.Shinsei, K. Amitani, J. Wada, S. Okabe IEEE Trans. Plasma Sci. 39 11 2776-2777 2011/11
  •  An improved local thermal equilibrium model of dc arc plasma torch R.Huang, H.Fukanuma, Y.Uesugi, Y.Tanaka IEEE Trans. Plasma Sci., 39 10 1974-1982 2011/10
  •  Suppression of carbon agglomeration and volatile molecular formation in C-H-N reactive molecular system Y.Uesugi, M.Kyo, Y.Takeguchi, Y.Takai, Y.Tanaka, S.Masuzaki  J. Nuclear Materials 415 1 S1081-S1084 2011/08
  •  Simulation of dynamics of carbon dust particles in JT-60U tokamak Y.Tanaka, R.D.Smirnov, A.Y.Pigarov, H.Takenaga, N.Asakura, Y.Uesugi, N.Ohno J. Nuclear Materials 415 1 S1106-S1110 2011/08
  •  Influence of coil current modulation on TiO2 nanoparticle synthesis using pulse-modulated induction thermal plasmas  Y.Tanaka, H.Sakai, T.Tsuke, Y.Uesugi, Y.Sakai, K.Nakamura Thin solid films 519 20 7100-7105 2011/08
  •  Arc quenching effect of polymer ablation on arc properties around current zero T.Onchi, Y.Tanaka, Y.Uesugi 電気学会論文誌IEEJ Trans. PE 131 7 609-620 2011/07
  •  Evaluation of hydrogen isotope oxidation process in an atmospheric pressure plasma  K. Akahane, N. Ezumi, Y. Uesugi, Y. Tanaka, M. Tanaka, K. Nishimura Fusion Science and Technology 60 4 1343-1346 2011/04
  •  Thermofluid simulation of arc plasmas confined by a polymer hollow cylinder T.Onchi, K.Kawasaki, Y.Tanaka, Y.Uesugi IEEJ Trans. PE 131-B 2 196-204 2011/02
  •  Experimental study of phenomena on electrode for oxygen plasma arc cutting torch Y.Yamaguchi, K.Yoshida, Y.Katada, Y.Uesugi, Y.Tanaka  溶接学会論文集J. Jpn. Welding Soc. 29 1 10-27 2011/01
  •  Experimental study of erosion of hafnium electrodes for oxygen plasma arc cutting Y.Yamaguchi, K.Yoshida, Y.Uesugi, Y.Tanaka, S.Morimoto, M.Minonishi, K.Saio  溶接学会論文集 J. Jpn Welding Soc. 28 3 311-318 2010/09
  •  Nanoparticle synthesis using high-powered pulse-modulated induction thermal plasma Y.Tanaka, T.Nagumo,H.Sakai,Y.Uesugi, Y.Sakai,K.Nakamura JOURNAL OF PHYSICS D-APPLIED PHYSICS 43 265201 2010/07
  •  Two-temperature non-chemical equilibrium analysis of Ar-CH4-O2 ICTP at reduced pressure S.A.Al-Mamun,Y.Tanaka, Y.Uesugi THIN SOLID FILMS 518 13,3535-3540 2010/04
  •  Two-temperature two-dimensional non chemical equilibrium modeling of Ar-CO2-H2 induction thermal plasmas at atmospheric pressure S.A.Al-Mamun, Y.Tanaka, Y.Uesugi PLASMA CHEMISTRY AND PLASMA PROCESSING 30 1,141-172 2010/02
  •  Chemical erosion of diamond coated graphite Y. Takeguchi,, M. Kyo, Y. Uesugi Y. Tanaka, S. Masuzaki Plasma & Fusion Research:Rapid Communications 5  003 2010/01
  •  Suppression of carbon dust formation by nitrogen injection into hydrogen plasmas in detached plasma conditions M. Kyo, Y. Takeguchi, Y. Uesugi, Y. Tanaka, S. Masuzaki Plasma & Fusion Research: Rapid Communications Vol 5, 004, 2010 (3pp) 5 004 2010/01
  •  Observation of non-chemical equilibrium effect on Ar-CO2-H2 thermal plasma model by changing pressure S.A.Al-Mamun, Y.Tanaka, Y.Uesugi THIN SOLID FILMS 518 3, 943-951 2009/12
  •  Thermally and chemically non-equilibrium modeling of Ar-N2-H2 inductively coupled plasmas at reduced pressure Y.Tanaka THIN SOLID FILMS 518 3, 936-942 2009/12
  •  Erosion and dust formation of graphite materials under low-energy and high-flux atomic hydrogen irradiation Y.Takeguchi, M.Kyo, Y.Uesugi, Y.Tanaka, S.Masuzaki Physica Scripta T138  0145056 2009/12
  •  Carbon erosion under heavy atomic hydrogen irradiation Y.Takeguchi, M.Kyo, Y.Tanaka, Y.Uesugi J. Plasma and Fusion Research Series 8  366-370 2009/09
  •  Carbon dust formation under heavy atomic hydrogen irradiation M.Kyo, Y.Takeguchi, Y.Tanaka, Y.Uesugi J. Plasma and Fusion Research Series 8  371-375 2009/09
  •  Dynamic behavior of hydrogen and nitrogen radicals in pulse modulated induction thermal plasmas T.Ito,Y.Tanaka,K.Hayashi, Y.Uesugi J. Plasma and Fusion Research Series 8  728-731 2009/09
  •  Mathematical modeling and numerical simulation of splat cooling in plasma spray coatings H.Fukanuma,R.Huang, Y.Tanaka, Y.Uesugi JOURNAL OF THERMAL SPRAY TECHNOLOGY 18 5-6  965-974 2009/09
  •  Investigation on temperature decay of thermal plasma with ablation of polymer materials T.Sakuyama,Y.Tanaka, Y.Uesugi, S.Kaneko, S.Okabe J. Plasma and Fusion Research Series 8  728-731 2009/09
  •  Chemically non-equilibrium modelling of Ar inductively coupled thermal plasma with C-H-O systems S.A.Al-Mamun,Y.Tanaka,Y.Uesugi J. Plasma and Fusion Research Series 8  1243-1247 2009/09
  •  Control of induction thermal plasmas by coil current modulation in arbitrary-waveform Y.Tsubokawa, Y.Tanaka, Y.Uesugi J. Plasma and Fusion Research Series 8  1353-1357 2009/09
  •  Numerical simulation on ablation process of a solid particle in thermal plasmas using CIP-VOF method Y.Tanaka, J.Mostaghimi Trans. Electrical & Electronic Eng 4 4 488-496 2009/06
  •  Study of carbon dust formation and their structure using inductively coupled plasmas under heavy atomic hydrogen irradiation Y.Takeguchi,M.Kyo, Y.Tanaka,Y.Uesugi J.Nuclear Material 390-391 15 188-191 2009/06
  •  Plasma-Quenching Efficiency of Ablated Vapor of Polymer Containing Nitrogen Atoms using Inductively Coupled Thermal Plasma Technique T.Sakuyama, Y.Tanaka, Y.Uesugi, S.Kaneko, S.Okabe T.IEE of Japan 29-PE 3 461-463 2009/03
  •  Recent progress in understanding the behavior of dust in fusion devices S.I.Krasheninnikov, A.Yu Pigarov, R.D.Smirnov, M.Rosenberg, Y.Tanaka et al. Plasma Phys. Control. Fusion 50 12 124054 2008/12
  •  Spatial distribution of C2 spectra from induction thermal plasmas with polymer powder injection Y.Tanaka,T.Sakuyama,Y.Takeuchi,Y.Uesugi,S.Kaneko,S.Okabe IEEE TRANSACTIONS ON PLASMA SCIENCE 36 4 1058-1059 2008/09
  •  Influence of ontime on increased number density of excited nitrogen atom in pulse modulated induction thermal plasmas Y.Tanaka, K.Hayashi, T.Nakamura, Y.Uesugi JOURNAL OF PHYSICS D-APPLIED PHYSICS 41 185203 2008/09
  •  Influence of emissivity on behavior of metallic dust particles in plasmas Y.Tanaka, R.D.Smirnov,A.Y.Pigarov, M.Rosenberg PHYSICS OF PLASMAS 15 073704 2008/07
  •  Carbon erosion and dust formation under heavy atomic hydrogen irradiation Y.Takeguchi,M.Kyo,Y.Uesugi,Y.Tanaka Journal of Plasma Fusion Research 3 025 2008/06
  •  Measurement of plasma properties of the atmospheric oxy-combustion flame by using double probe method Y.Osaka, N.Kobayashi, N.Ohno, S.Takamura, Y.Tanaka, Y.Uesugi Contrib. Plasma Phys. 48 5-7 485-490 2008/06
  •  Numerical modelling of dust behaviour made of different materials Y.Tanaka,A.Y.Pigarov,R.D.Smirnov,S.I.Krasheninnikov,N.Ono,Y.Uesugi CONTRIBUTIONS TO PLASMA PHYSICS 48 1-3 295-299 2008/03
  •  CO2 and H2 gas mixture inclusion effect on shrinkage of Ar induction thermal plasmas S.A.Al-Mamun,Y.Tanaka,Y.Uesugi IEEJ Transaction on Power and Energy 128 2-476-485 2008/02
  •  Comparison of Vibrational-Rotational Temperature and Excitation Temperature in Ar-Molecular Gas Induction Thermal Plasmas T.Uchida, Y.Tanaka, Y.Uesugi IEEJ Transaction on Power and Energy 127 8 936-942 2007/08
  •  Numerical simulation of thermal interaction between polymer and Ar induction thermal plasma Y.Takeuchi, Y.Tanaka, Y.Uesugi, S.Kaneko, S.Okabe Trans. IEE of Japan 127-PE 6 739-746 2007/06
  •  Modeling of dust transport for different materials in plasmas Y.Tanaka, A.Y.Pigarov, R.D.Smirnov, S.I.Krasheninnikov, N.Ohno, Y.Uesugi PHYSICS OF PLASMAS 14 052504 2007/05
  •  Control of nitrogen atomic density and enthalpy flow into reaction chamber in Ar-N2 pulse-modulated induction thermal plasmas Y.Tanaka, T.Muroya, K.Hayashi, Y.Uesugi IEEE TRANSACTIONS ON PLASMA SCIENCE 35 2 197-203 2007/04
  •  Controlling the number of excited atoms flowing into the reaction chamber using pulse-modulated induction thermal plasmas at atmospheric pressure Y.Tanaka, Y.Uesugi, T.Sakuta Plasma Sources Sci. Technol. 16 281-289 2007/03
  •  Generation of high-power arbitrary-waveform modulated inductively coupled plasmas for materials processing Y.Tanaka, Y.Morishita, K.Okunaga, S.Fushie, Y.Uesugi APPLIED PHYSICS LETTERS 90 071502 2007/02
  •  Simultaneous control of numerical enhancement of N atom and decrease in heat flux into reaction chamber using Ar-N2 pulse-modulated induction thermal plasmas Y.Tanaka, T.Muroya, K.Hayashi, Y.Uesugi APPLIED PHYSICS LETTERS 89 3 031501 2006/07
  •  The 3D simulation of dust particle transport S.I.Krasheninnikov, A.Y.Pigarov, Y.Tanaka, I.H.Hutchinson, T.D.Rognlien, T.K.Soboleva CONTRIBUTIONS TO PLASMA PHYSICS 40 7_9 136-141 2006/07
  •  Time-dependent two-temperature chemically non-equilibrium modelling of high-power Ar-N2 pulse-modulated inductively coupled plasmas at atmospheric pressure Y.Tanaka JOURNAL OF PHYSICS D-APPLIED PHYSICS 39 2 307-319 2006/01
  •  Thermodynamic and transport properties of CO2, CO2-O2, CO2-H2 mixtures at temperatures of 300-30000 K and at pressures of 0.1-10 MPa Y.Tanaka, et al. IEEJ Transaction on Power and Energy 126PE 1 80-90 2006/01
  •  Influence of polymer vapor concentration on temperature of Ar induction thermal plasmas during polymer solid powder Y.Tanaka, T.Numada, Y.Uesugi, S.Okabe, S.Kaneko IEEJ Transaction on Power and Energy 125PE 11 1077-1083 2005/11
  •  Gas flow simulation with cotact moving in GCB considering high-pressure and high-temperature transport properties of SF6 gas T.Mori, H.Kawano,K.Iwamoto,E.Kaneko,Y.Tanaka IEEE TRANSACTIONS ON POWER DELIVERY 20 4 2466-2472 2005/10
  •  Thermodynamic and transport properties of polymer ablated vapors and influence of their inclusions on Ar induction thermal plasma temperature Y.Tanaka, T.Numada, S.Kaneko, S.Okada JSME INTERNATIONAL JOURNAL SERIES B-FLUIDS AND THERMAL ENGINEERING 48 3 417-424 2005/08
  •  Transient response simulation of downstream thermofluid field in a gas circuit breaker during current interruption H.Nishiyama, K.Hamada, T.Uchii, H.Kawano, Y.Tanaka JSME INTERNATIONAL JOURNAL SERIES B-FLUIDS AND THERMAL ENGINEERING 48 3 381-388 2005/08
  •  Gas flow simulation in GCB chambers featuring hot gas energy T.Mori,H.Kawano, K.Iwamoto IEEJ Transaction on Power and Energy 125 8 771-776 2005/08
  •  Influence of copper vapor contamination on dielectric properties of hot air in temperature range of 300-3500K at atmospheric pressure IEEE TRANSACTIONS ON DIELECTRICS AND ELECTRICAL INSULATION 12 3 504-512 2005/06
  •  Time evolution in visible light emission from high-power Ar pulse-modulated induction thermal plasmas IEEE TRANSACTIONS ON PLASMA SCIENCE 33 2 406-407 2005/04
  •  Hydrodynamic chemical non-equilibrium model of a pulsed arc discharge in dry air at atmospheric pressure PLASMA SOURCES SCIENCE & TECHNOLOGY 14 1 134-151 2005/01
  •  Time-dependent two-dimensional chemical non-equilibrium modeling of Ar-N2 pulse-modulated induction thermal plasma at atmospheric pressure for material processing Y.Tanaka, T.Sakuta Trans. MRS-J 37 8 3403-3406 2004/12
  •  Two-temperature chemically non-equilibrium modelling of high-power Ar-N2 inductively coupled plasmas at atmospheric pressure JOURNAL OF PHYSICS D-APPLIED PHYSICS 37 8 1190-1205 2004/04
  •  Modeling of Ar induction thermal plasma with an injection of PTFE powder Transaction of IEE of Japan 124-PE 3 440-446 2004/03
  •  Prediction of dielectric properties of N2/O2 mixtures in temperature range of 300-3500 K JOURNAL OF PHYSICS D-APPLIED PHYSICS 37 6 851-859 2004/03
  •  Transienet nature of argon and molecular gas-seeded argon induction thermal plasmas in pulse modulation approach 123-B (in press) 2003/11
  •  Investigation on effective ionization coefficient and critical electric field strength in air in temperature range of 300-3500K by solving Boltzmann equation 123-B (in press) 2003/11
  •  Dynamic responses of Ar-CO2 and Ar-N2 induction thermal plasmas in pulse modulation approach: a numerical analysis THIN SOLID FILMS 435 19-26 2003/06
  •  Extinguishing phenomenon and critical discharge boundaries of argon and molecular gas-seeded argon pulse modulated induction thermal plasmas PLASMA SOURCES SCIENCE & TECHNOLOGY 12 22-29 2003/02
  •  Temperature control of Ar induction thermal plasma with diatomic molecular gases by pulse-amplitude modulation of coil-current PLASMA SOURCES SCIENCE & TECHNOLOGY 12 2 69-77 2003/02
  •  Effect of ambient gas and pressure on fullerene synthesis in induction thermal plasma THIN SOLID FILMS 425 1-2 42-49 2003/01
  •  Time dependent analysis of electromagnetic fields in inductively coupled thermal plasma 14 121-128 2003/01
  •  Investigation of plasma-quenching efficiency of vairous gases using induction thermal plasma technique: effect of various gas injection on Ar thermal ICP JOURNAL OF PHYSICS D-APPLIED PHYSICS 35 17 2149-2158 2002/09
  •  Stable operation region and dynamic behavior of pulse modulated Ar thermal plasma with different molecular gases 123-A 5 469-478 2002/05
  •  Silicon inclusion effect on fullerene formation under induction thermal plasma condition THIN SOLID FILMS 407 1-2 72-78 2002/03
  •  Chemically non-equilibrium modelling of N2 thermal ICP at atmospheric pressure using reaction kinetics Journal of Physics D: Applied Physics 35 5 468-476 2002/03
  •  Particle concentrations and transport properties of a partially ionised argon plasma in two-temperature reaction kinetic approach Journal of Physics D: Applied Physics 35 6 529-535 2002/03
  •  A comparative study of transient characteristics of argon and argon-hydrogen pulse modulated induction thermal plasma IEEE TRANSACTIONS ON PLASMA SCIENCE 3 1 327-337 2002/02
  •  Synthesis of fullerenes from carbon powder by using high power induction thermal plasma Thin Solid Film 390 1-2 31-36 2001/05
  •  Responses of a long-coil pulse-modulated induction plasma IEEE Transaction on Plasma Science 29 2 326-334 2001/04
  •  Prediction of operating region of pulse modulated rf inductively coupled thermal plasma Journal of Physics D: Applied Physics 33 15 1843-1853 2000/08
  •  Measurement of dynamic response time in pulse modulated thermal plasma Transaction of MRS of Japan 25 1 293-296 2000/03
  •  Non-equilibrium effects in pulse modulated induction thermal plasma for advanced processing Transaction of MRS of Japan 25 1 35-38 2000/03
  •  Thermodynamic and transport properties of N2/O2 mixtures at different admixture ratios Transaction of IEE of Japan 120-B 1 24-30 2000/01
  •  Modelling of a pulsed discharge in N2 gas at atmospheric pressure using reaction kinetics Journal of Physics D: Applied Physics 32 24 3199-3207 1999/12
  •  On the determination of the multi-temperature SF6 plasma composition Journal of Physics D: Applied Physics 32 15 1851-1856 1999/08
  •  Dominant spectra of background radiation in an SF6 post-arc channel IEEE TRANSACTIONS ON PLASMA SCIENCE 25 5 986-990 1997/10
  •  Particle composition of high-pressure SF6 plasma with electron temperature greater than gas temperature IEEE TRANSACTIONS ON PLASMA SCIENCE 25 5 991-995 1997/10
  •  The opening process of thermal plasma contacts in a post-arc channel after current zero in a flat-type SF6 gas-blast quenching chamber JOURNAL OF PHYSICS D-APPLIED PHYSICS 30 3 407-416 1997/02
  •  Background radiation in an SF6 gas thermal plasma 5 10-16 1997/01
  •  Opening process of fictitious contacts made of thermal plasma after current zero in a flat-type SF6 gas-blast quenching chamber 116-B 10 1204-1211 1996/10
  •  Transient distribution of metallic vapour concentration in post-arc channel after current zero along nozzle axis in a flat-type SF6 gas-blast quenching chamber JOURNAL OF PHYSICS D-APPLIED PHYSICS 29 6 1540-1550 1996/06
  •  Transient distribution of arc temperature along nozzle throat axis around current zero in a flat-type SF6 arc chamber 3 21-24 1995/12
  •  Transient behaviour of axial temperature distribution in post-arc channel after current zero around nozzle throat in flat-type SF6 gas-blast quenching chamber JOURNAL OF PHYSICS D-APPLIED PHYSICS 28 10 2095-2103 1995/10
  •  Development of a Loop-Type of Inductively Coupled Thermal Plasmas with Molecular Gas Injection for Large-Area Uniform Materials Processings  Y Tanaka*, H. Irie, Y. Maruyama, Mai Kai Suan Tial, Y. Uesugi, T. Ishijima, T. Yukimoto, and H. Kawaura 22nd Int. Symp. Plasma Chem.(ISPC-22) O-21-3 2015/07
  •  Spectroscopic study on evaporation of Ti feedstock intermittently supplied and formation of precursor TiO in TiO2 nanopowder synthesis in the induction thermal plasma torch  N.Kodama*, K.Kita, Y.Tanaka, Y.Uesugi, T.Ishijima, S.Watanabe, K.Nakamura(Poster) 22nd Int. Sym. Plasma Chem. (ISPC-22) P-II-12-10 2015/07
  •  Gas Species Influence on OH Radical Generation in Liquid using Low Frequency Atmospheric Pressure Plasma Jet  Y.Imazawa*,Y.Otaki,T. Inomata, T.Ishijima,Y.Tanaka,Y.Uesugi(Oral) ISPlasma/IC-PLANTS 2015 D4-O-05 2015/03
  •  Chemical Non-Equilibrium Modelling of Induction Thermal Plasmas with CH4/H2 Gas Injection for Carbon Film Deposition  Y. Tanaka*, S. Horita, M.Fukuzawa, T.Ishijima,Y.Uesugi(Oral) ISPlasma/IC-PLANTS 2015 2015/03
  •  Uniform Formation of Thermal Plasmas using a Loop-type of Ar Inductively Thermal Plasma on a Substrate  H.Irie*, Y.Maruyama, Y.Tanaka,Y.Uesugi, T.Ishijima,T.Yukimoto, H.Kawaura(Poster) ISPlasma/IC-PLANTS 2015 A1-P-03 2015/03
  •  Feedstock evaporation and precursor formation in TiO2 nanoparticle synthesis processes in pulse-modulated induction thermal plasmas torch  N.Kodama*, K.Kita, Y.Tanaka, Y.Uesugi,T.Ishijima, S.Watanabe, K.Nakamura (Oral) ISPlasma/IC-PLANTS 2015 2015/03
  •  Visualization of the Plasma Arc and the Surface Temperature of Hafnium Cathode in Oxygen Plasma Arc Cutting  Y.Tanaka, N.P. Long, K.Yoshida, Y.Uesugi, Y.Yamaguchi (Plenary invited lecture), Visual-JW2014 2014/11
  •  Polycrystalline Diamond Film Deposition using Induction Thermal Plasmas Modulated into Sawtooth Waveform  S.Horita*, M.Fukuzawa, Y.Tanaka,Y.Uesugi, T.Ishijima  12th Asia Pacific Conf. Plasma Technol. & 27th Symp.Plasma Sci. for Materials (APCPST12/SPSM27) 2014/09
  •  High Production Rate Synthesis of Fe-doped TiO2 nanopowder using Pulse-Modulated Induction Thermal Plasmas with Time-Controlled Feedstock Feeding  K. Kita, N. Kodama, Y.Tanaka, Y.Uesugi, T. Ishijima, S.Watanabe, K. Nakamura 12th Asia Pacific Conf. Plasma Technol. & 27th Symp.Plasma Sci. for Materials (APCPST12/SPSM27 2014/09
  •  New Development of Planar/Loop Types of Inductively Coupled Thermal Plasma Torches for Large-Area Processings  Y. Tanaka*, H. Irie, M.Akao,T.Ishijima, Y.Uesugi, T.Yukimoto, H.Kawaura 12th Asia Pacific Conf. Plasma Technol. & 27th Symp.Plasma Sci. for Materials (APCPST12/SPSM27) 2014/09
  •  Heat-Shield Effect of Polymer Ablation from Synthetic-Fiber Fabrics due to Thermal Plasma Contact for Arc-Resistant Clothes  Y. Tanaka*,M.Ishida,Y.Utsunomiya,T.Ishijima, Y.Uesugi, H.Hagi, A.Mizobuchi, W.Mio, K.Uchibori 12th Asia Pacific Conf. Plasma Technol. & 27th Symp.Plasma Sci. for Materials (APCPST12/SPSM27) 2014/09
  •  Optical Diagnostics of Decay Processes of Ar/SF6 Gas Blast Arcs Confined by a Nozzle  K. Tomita*, D.Gojima, K.Nagai, T.Shimizu, K.Uchino, Y.Tanaka,K.Suzuki, T.Iijima, T.Uchii, T.Shikai Int. Conf. Gas Discharges and Their Appl. GD2014 1 187-190 2014/06
  •  Spallation Occurrence Control by Mixing Phthalate Esters in Polyamide Material for Polymer Ablation Assisted Circuit Breakers  T.Nakano*, Y.Tanaka, Y.Goto, H.Horibe,T.Ishijima, Y.Uesugi Int. Conf. Gas Discharges and Their Appl. GD2014 1 215-218 2014/06
  •  Numerical Simulation on Two-Temperature Chemically Non-Equilibrium States in Decaying SF6 Arcs after Application of Recovery Voltage  Y. Tanaka*, K.Suzuki Int. Conf. Gas Discharges and Their Appl. GD2014 1 179-182 2014/06
  •  Adoption of Pulse-Modulated Induction Thermal Plasmas with Time-Controlled Feedstock Feeding to High Production Rate Synthesis of Metallic Ion Doped TiO2 Nanopowder  Y. Tanaka*, N.Kodama, K.Kita, Y.Uesugi, T.Ishijima, S.Watanabe, K.Nakamura High-Tech Plasma Processes HTTP-2014 2014/06
  •  Suppression of hydrogenated carbon film deposition and hydrogen isotope retention by nitrogen addition into cold remote H/D and CH4 mixture plasmas,  K. Iida, A. Sasaki, M. Notani, Y. Uesugi, Y. Tanaka, T. Ishijima,  21st Int. Conf. on Plasma Surface Interactions in Controlled Fusion Devices (21st PSI)  PI-052 2014/05
  •  Investigation of Chemical Species Production Rates in Aqueous Solution Irradiated by Non-equilibrium Atmospheric Pressure Jet  T. Ishijima, Y. Imazawa, T. Ito, M. Imamura, K.Ninomiya, K. Takahashi, Y. Tanaka, and Y. Uesugi 5th Int. Conf. on Plasma Medicine (ICPM5) 19-P11-04 2014/05
  •  Control of radical flow from induction thermal plasmas by current modulation for carbon film deposition Y.Tanaka*, Y.Haruta, S.Horita, Y.Uesugi, T.Ishijima FLUCOME2013 OS13-01-1 2013/11
  •  Effect of N2/O2 Inclusion on Polymer Ablation and Spallation Phenomena from Polyamide During Thermal Plasma Irradiation  T. Nakano, N.Shinsei, M. Ishida, Y.Tanaka, Y.Uesugi, T.Ishijima  2nd Int. Conf. Electric Power Equip.ICEPE2013 2-p2-P-1 2013/10
  •  Development of a thermally and chemically non-equilibrium model for decaying SF6 arc plasmas  Y. Tanaka, K.Suzuki, T.Iijima, T.Shinkai  2nd Int. Conf. Electric Power Equip.ICEPE2013
  •  Al-doped TiO2 Nanopowder Synthesized with High Production Rate using Modulated Induction Thermal Plasmas with Intermittent Feedstock Injection  Yasunori Tanaka*, N.Kodama, W. Guo, Y.Uesugi, T.Ishijima, S.Watanabe, K.Nakamura Symp.Plasma Sci. Mater.25
  •  Novel photoresist removal method using slot-antenna excited microwave plasma in ultrapure water  T.Ishijima*, K.Nosaka, Y. Goto, H.Horibe, Y.Tanaka, Y.Uesugi Int. Dry Process Symp.2013
  •  Fabrication of polycrystalline diamond films using modulated induction thermal plasmas into reverse-sawtooth-waveform  S. Horita*, Y.Haruta, Y. Tanaka, Y. Uesugi, T. Ishijima (Poster) Int. Dry Process Symp. 2013/08
  •  A Novel Approach for Large Amount Synthesis of TiO2 Nanopowder using Modulated Induction Thermal Plasmas with Time-Controlled Feeding of Feedstock -Effect of Quenching Gas Conditions-  Y. Tanaka, W. Guo, N. Kodama, Y. Uesugi, T. Ishijima, S. Watanabe, K. Nakamura Int. Symp. Plasma Chem. ISPC-21 No.52(4pp)  2013/08
  •  Reduction of heat flux on the hafnium cathode surface by changing the cathode holder shape in plasma arc cutting torch Nguyen Phi Long, Y. Tanaka, Y. Uesugi, and Y. Yamaguchi Int. Symp. Plasma Chem. ISPC-21 No.441(4pp) 2013/08
  •  Development of Large Amount Synthesis Method of Al-doped TiO2 Nanopowder using Modulated Induction Thermal Plasmas N. Kodama, W. Guo, Y. Tanaka, Y. Uesugi, T. Ishijima, S. Watanabe, K. Nakamura Int. Symp. Plasma Chem. ISPC-21 No.56(4pp),  2013/08
  •  Understanding and Suppression of Magnetic Arc Blow in Plasma Arc Cutting Torch Takeru Ito, Yusuke Katada, Yoshihiko Uesugi, Yasunori Tanaka, Tatsuo Ishijima, and Yoshihiro Yamaguchi Int. Symp. Plasma Chem. ISPC-21 No.70(4pp),  2013/08
  •  Reduction of a heat transfer due to polymer ablation from synthetic fibers irradiated by thermal plasmas for arc resistant clothes M. Ishida, N. Shinsei, Y. Tanaka, Y. Uesugi, T. Ishijima, H. Hagi, W. Mio, K. Uchibori Int. Symp. Plasma Chem. ISPC-21 No.54(4pp),  2013/08
  •  Temperature Evolution in a Large Volume Planar Type of Modulated Induction Thermal Plasmas M. Akao, K. Kuraishi, Y. Tanaka, Y. Uesugi, T. Ishijima, T. Yoshida Int. Symp. Plasma Chem. ISPC-21 No.247(4pp) 2013/08
  •  Detection of OH radicals in the liquid produced by nonthermal atmospheric pressure jet irradiation T. Yamahara, T. Ishijima, M. Imamura, K. Ninomiya, K. Takahashi, Y. Tanaka, Y. Uesugi  The 6th Int.Conf. Plasma Nanotechnol. & Sci.(IC-PLANTS2013), P-A03 2013/02
  •  A large amount synthesis of Al-doped TiO2 nanopowder using pulse-modulated induction thermal plasmas with time-controlled feeding of feedstock Y. Tanaka, N. Kodama, W. Guo, Y. Uesugi, T. Ishijima, S. Watanabe, and K. Nakamura The 6th Int.Conf. Plasma Nanotechnol. & Sci.(IC-PLANTS2013), P-C2 2013/02
  •  Investigation of chemical reactions in aqueous solution irradiated by atmospheric pressure low frequency plasma jet using chemical probe T. Ishijima, T. Yamahara, M. Imamura, K. Ninomiya, K. Takahashi, Y. Tanaka, Y. Uesugi The 13th International Symposium on Biomimetic Materials Processing (BMMP-13 J-16 2013/01
  •  Fundamental study of dissolved OH radicals in the liquid produced by atmospheric pressure plasma jet T.Yamahara, T.Ishijima, M.Imamura, K.Ninomiya, K.Takahashi, Y.Tanaka, Y.Uesugi The 5th Int.Symp.Adv. Plasma Sci. & its Appl. Nitrides and Nanomater.(ISPlasma2013) P3047A 2013/01
  •  Temperature evolution in a large volume planar type of modulated induction thermal plasmas M.Akao, K.Kuraishi, Y.Tanaka, Y.Uesugi,T.Ishijima, T.Yoshida  The 5th Int.Symp.Adv. Plasma Sci. & its Appl. Nitrides and Nanomater.(ISPlasma2013) P1011A 2013/01
  •  Enhancement of Non-Equilibrium Atmospheric Pressure He Plasma Discharges by Using Silicon Diode for Alternating Current Y. Sumiishi, Y. Uesugi, Y. Tanaka, T. Ishijima Asia-Pacific Conf. Plasma & Technol. Symp. Plasma Sci. Mater. APCPST-11 & SPSM-25 1-P40 2012/10
  •  Prompt response and durability of polymer ablation from synthetic fibers irradiated by thermal plasmas for arc resistant clothes M. Ishida, N.Shinsei,Y.Tanaka, Y. Uesugi, T. Ishijima, W. Mio, H. Hagi, K. Uchibori  Asia-Pacific Conf. Plasma & Technol. Symp. Plasma Sci. Mater. APCPST-11 & SPSM-25 3-P97 2012/10
  •  Temperature Behavior in a Tandem Type of Modulated Induction Thermal Plasma for Materials Processings K. Kuraishi, M. Akao, Y.Tanaka, Y.Uesugi, T.Ishijima Asia-Pacific Conf. Plasma & Technol. Symp. Plasma Sci. Mater. APCPST-11 & SPSM-25 1-P71 2012/10
  •  Time Evolution in Radiation Intensities of C2 and H Spectra in Ar/CH4/H2 Modulated Induction Thermal Plasmas for Diamond Film Deposition Y.Haruta, K.Fujimoto, S.Horita, Y.Tanaka, Y.Uesugi, T.Ishijima Asia-Pacific Conf. Plasma & Technol. Symp. Plasma Sci. Mater. APCPST-11 & SPSM-25 2-P111 2012/10
  •  Size Control and Heavy Rate Production Method of Nanoparticles using Modulated Induction Thermal Plasma with Time-Controlled Powder Injection Y.Tanaka, W.Guo, T.Tsuke, N. Kodama, Y.Uesugi, T.Ishijima, S.Watanabe, K.Nakamura Asia-Pacific Conf. Plasma & Technol. Symp. Plasma Sci. Mater. APCPST-11 & SPSM-25 4G-O07 2012/10
  •  Nanopowder Synthesis using High-Power Modulated Induction Thermal Plasmas with Heavy Rate Intermittent Feeding of Raw Material Powder Y.Tanaka, W. Guo, T.Tsuke, Y.Uesugi, T.Ishijima, S.Watanabe, K.Nakamura nt. Union Mater. Res. Soc. ?Int. Conf. Electronic Mater. IUMRS-ICEM2012 D-4-O25-014 (1p) 2012/09
  •  Innovative Applications of Modulated Induction Thermal Plasma Flow for Materials Processings Y.Tanaka 9th Int.Conf. Flow Dynamics ICFD2012 pp. 694-695 2012/09
  •  Numerical study on particle composition variation in decaying SF6 arc plasmas using a 2D chemically non-equilibrium model Y.Tanaka, T.Shinkai Proc. 19th Int.Conf. Gas Discharges & their Appl., GD2012 pp.66-69 2012/09
  •  Generation of spallation particles from polyamide materials with water irradiated by thermal plasmas Y.Tanaka, N.Shinsei, Y.Uesugi, J.Wada, S.Okabe Proc. 19th Int.Conf. Gas Discharges & their Appl., GD2012 pp.210-213 2012/09
  •  Direct observation of cathode spot behaviour in an oxygen plasma arc cutting torch Y.Tanaka, Y.Katada, T.Ito,Y.Uesugi, Y.Yamaguchi Proc. 19th Int.Conf. Gas Discharges & their Appl., GD2012 pp.122-125 2012/09
  •  Numerical simulation on transient analysis of hafnium cathode evaporation in plasma arc cutting during switching off N.P.Long, Y.Tanaka, Y.Uesugi Proc. 19th Int.Conf. Gas Discharges & their Appl., GD2012 pp.166-169 2012/09
  •  Effect of gas flow on decay process in SF6 arcs predicted by a chemically non-equilibrium model Y.Tanaka, T.Shinkai Int.Conf. Electrical Engineering, ICEE2012 P-PS1-1 (4pp),  2012/07
  •  A large amount synthesis of nanopowder using modulated induction thermal plasmas synchronized with intermittent feeding of raw materials Y. Tanaka, T. Tsuke, W. Guo, Y. Uesugi, T. Ishijima, S.Watanabe, K.Nakamura High-Temperature Plasma Processes, HTPP2012 Oral3 2012/06
  •  Removal of carbon deposited film and hydrogen retention control by low temperature H-C-N reactive plasmas A. Sasaki, Y. Takai, Y. Uesugi, Y.Tanaka T. Ishijima  Plasma Surface Interaction PSI-2012 P3-051 2012/05
  •  Dynamic Behavior of Multi-Phase Structure Plasmas in a Cathode Arc Spot Y.Uesugi, Y. Katada, T. Ito, Y. Tanaka, T. Ishijima, Y. Yamaguchi Plasma Surface Interaction PSI-2012 P3-103 2012/05
  •  Numerical simulation on dynamics of spallation particles ejected from polyamide materials during irradiation of Ar thermal plasma N.Shinsei, Y.Tanaka, Y.Uesugi, J.Wada, S.Okabe Proc. the First Int. Conf. Electric Power Equip. Switching Technol., ICEPE2011 555-558 2011/10
  •  Development of a chemically non-equilibrium model on decaying SF6 arc plasmas Y.Tanaka, K.Suzuki Proc. the First Int. Conf. Electric Power Equip. Switching Technol., ICEPE2011 492-495 2011/10
  •  Simulation of arc root fluctuation in a dc non-transferred plasma torch with three dimensional modeling  R. Huang, H. Fukanuma, Y. Uesugi, Y. Tanaka Int.Thermal Spray Conference and Exposition (ITSC 2011) 1278-1283 2011/09
  •  Physicochemical characteristics of methane-air dielectric barrier discharge at high pressure H.Takana, Y.Tanaka, H.Nishiyama Proc. 20th Int. Symp. Plasma Chem. ISPC-20 No.76(4pp) 2011/07
  •  Fundamental study of metane-air plasma flow at high pressure H.Takana, Y.Tanaka, H.Nishiyama  Int. Conf. Fluid Dynamics ICFD2010 No.1204 2010/11
  •  Nanoparticle synthesis using high-power modulated induction thermal plasmas with intermittent synchronized feeding of raw materials Y.Tanaka, H.Sakai, T.Tsuke, W.Guo, Y.Uesugi, Y.Sakai, K.Nakamura Proc. 20th Int. Symp. Plasma Chem. ISPC-20 No.346(4pp) 2011/07
  •  Development of the quasi-direct temperature control type of modulated induction thermal plasma and its application to plasma temperature recovery after molecular gas injection Y.Tanaka, Y.Uesaka, Y.Tsubokawa, Y.Uesugi Proc. 20th Int. Symp. Plasma Chem. ISPC-20 No.32(4pp) 2011/07
  •  Numerical prediction on dependence of the arc current and swirl gas angle on evaporation of hafnium cathode in a plasma cutting arc N.P.Long, Y.Tanaka, Y.Uesugi, Y.Yamaguchi Proc. 20th Int. Symp. Plasma Chem. ISPC-20 No.147(4pp) 2011/07
  •  Dynamic response of refractory metal electrode to ~GW/m2 plasma heat load in the stabilized arc discharges Rosenheim, Germany  Y.Uesugi, K.Yoshida, Y.Katada, Y.Yamaguchi, Y.Tanaka 13th Int. Workshop Plasma-Facing Mater. & Comp. Fusion Appl. P72B,198 2011/05
  •  Computational Simulation of Highly Reactive Air Plasma Jet under High Pressure Conditions H.Takana, Y.Tanaka, H. Nishiyama Proc. of the 10th Int. Symp. on Advanced Fluid Information and Transdisciplinary Fluid Integration 42-43 2010/11
  •  Effect of Polymer Ablation Gas on Arc Quenching Properties Around Current Zero Onchi, Toshiyuki;Tanaka, Yasunori;Uesugi, Yoshihiko ELECTRICAL ENGINEERING IN JAPAN 180 3 32-45 2012
  •  Comparisons of Two Models for the Simulation of a DC Arc Plasma Torch Huang, Renzhong;Fukanuma, Hirotaka;Uesugi, Yoshihiko;Tanaka, Yasunori JOURNAL OF THERMAL SPRAY TECHNOLOGY 22 42038 183-191 2013 
  •  Time-dependent two-temperature chemical non-equilibrium modelling of high-power Ar-N2 pulse-modulated induction plasma at atmospheric pressure Y.Tanaka Abstracts of 7th Asia-Pacific Conf. Plasma Sci. Technol. 29P105 176 2004/07
  •  Temperature decay of Ar inductively coupled thermal plasmas at atmospheric pressure by injection of polymer powder Y.Tanaka, T.Numada, S.Kaneko, S.Okabe Abstracts of First Int. Conf. Flow Dynamics 2004/11
  •  Modulated induction thermal plasmas –fundamentals and applications-  Y.Tanaka, Y.Uesugi Trans. Electrical & Electronic Eng. 4 465-475 2009/06
  •  Transient distributions of arc temperature and tis electrical resistivity along nozzle throat axis around current zero in a flat-type SF6 gas chamber Y.Yokomizu, T.Matsumura, Y.Kito Proc. 11th Int. Conf. Gas Discharges and their Applications 1 1 42-45 1995/09
  •  Electrical and thermal conductivities and enthalpy of air plasma contaminated with Fe, Ca, Mg or H2O vapour Y.Yokomizu, M.Kato, T.Matsumura,K.Shimizu,S.Takayama, T.Okada Proc. 4th Thermal Plasma Processes Conf. 587 1996/07
  •  Diagnosis of temperature and metallic vapour concentration in post-arc at nozzle throat in flat-type gas-blast quenching chamber Y.Yokomizu, T.Matsumura, Y.Kito Proc. 7th Annual Conf. Power Energy Soc.of IEEJ 345 1996/08
  •  Quenching effect of SF6 injection on Ar thermal ICP at atmospheric pressure Proceeding of 13th International Conference on Gas Discharges and their Applications 1 170-173 2000/09
  •  Synthesis of fullerenes from carbon powder by using high power induction thermal plasma Proceeding of 5th Asia-Pacific Conference on Plasma Science and Technology and 13th Symposium on Plasma Science for Materials 51 2000/09
  •  Transient responses of mixed-gas induction thermal plasma in pulse modulated mode Proceeding of 13th International Conference on Gas Discharges and their Applications 2 567-570 2000/09
  •  Two-dimensional model for particle density distribution calculation in N2 thermal ICP using reaction rates Proceeding of 13th International Conference on Gas Discharges and their Applications 2 559-562 2000/09
  •  Particle concentration of a partially ionised atmospheric pressure argon plasma in two-temperature reaction kinetic approach Proceeding of 25th International Conference on Phenomena in Ionized Gas 3 19-24 2001/07
  •  Synthesis of fullerene with C-Si mixed particles by using induction thermal plasma Proceeding of 15th International Symposium on Plasma Chemistry 7 2817-2822 2001/07
  •  Time-dependent analysis of electromagnetic fields in inductively coupled thermal plasma Proc. Int. Japan-Australia-New Zealand Joint Seminar 57 2002/01
  •  Effect of ambient gas and pressure on fullerene synthesis in induction thermal plasma Proc. Joint Int. Plasma Symp. 6th APCPST, 15th SPSM, OS2002 & 11th KAPRA PW_058 2002/07
  •  Self-consistent chemically non-equilibrium model of Ar-N2 induction thermal plasma with reactor chamber Proc. Joint Int.Plasma Symp. 6th APCPST, 15th SPSM, OS2002 & 11th KAPRA PW-058 2002/07
  •  Enhancement of excited particle density in reactor chamber by pulse-modulation of induction thermal plasma Proc. Joint Int. Plasma Symp. 6th APCPST, 15th SPSM, OS2002, 11th KAPRA PW-057 2002/07
  •  Dynamic Responses of Ar-CO2 and Ar-N2 induction thermal plasmas in pulse modulation approach: A numerical analysis Proc. Joint Int. Plasma Symp. 6th APCPST, 15th SPSM, OS2002, 11th KAPRA 218 2002/07
  •  Chemical non-equilibrium modelling of transient N2 induction thermal plasma after step current disturbance Prc. 14th Int. Conf. on Gas Discharges and their Applications 2 44-47 2002/09
  •  Dynamic aspect of high-pressure pulsed induction thermal plasma including molecular gases as arc-quenching medium Proc. 14th Int. Conf. on Gas Dicharges and their Applications 1 63-66 2002/09
  •  Influence of various gas inclusion in Ar thermal ICP at atmospheric pressure upon plasma temperature and impedance Proc. IEEE/PES Transmission & Distribution Conf. and Exhibit. 2002 2 898-903 2002/10
  •  Fullerenes synthesis by evaporating Si-C powder in high temperature field of ICTP Proc. Int. Symp. on Innov. Mater. Process. Controlling Chem. Reac. Field 267-270 2002/11
  •  Transient axial distribution of excited particle number in pulse-modulated induction thermal plasma Proc. Int. Symp. on Innov. Mater. Process. Controlling Chem. Reac. Field 255-258 2002/11
  •  Self-consistent chemical and thermal non-equilibrium modelling of Ar-N2 induction thermal plasma with a reaction chamber Processing of 16th Int. Symp. on Plasma Chem. ISPC-16 CD-ROM 329 2003/06
  •  Enhancement of excited-atom flux in downstream portion of pulse-modulated induction thermal plasma Proc. 16th Int. Symp. on Plasma Chem. ISPC-16 CD-ROM 729 2003/06
  •  Time-dependent two-dimensional chemical non-equilibrium modelling of Ar-N2 induction thermal plasma at atmospheric pressure for material processing Proceeding of IUMRS-ICAM2003 D4-09-O4 204 2003/10
  •  Transient behaviour of a pulsed arc discharge in air at atmospheric pressure Y.Tanaka, T.Michishita Abstracts of 7th Asia-Pacific Conf. Plasma Sci. Technol. B3 55 2004/07
  •  Prediction of dielectric strengths of hot air contaminated with copper in temperature range of 300-3500K Proc. 15th Int. Conf. Gas Discharges and their Applications GD2004 1 1 109-112 2004/09
  •  Self-consistent chemically non-equilibrium model of pulsed-arc discharge in air at atmospheric pressure Y.Tanaka, T.Michishita Proc. 15th Int. Conf. Gas Discharges and their Applications 1 101-104 2004/09
  •  Transient response simulation of downstream thermofluid field in a gas circuit breaker at current interruption H.Nishiyama, K.Hamada, T.Uchii, Y.Tanaka Proc. 15th Int. Conf. Gas Discharges and their Applications 1 5-8 2004/09
  •  Time-dependent two-dimensional two-temperature chemically non-equilibrium model of Ar-N2 pulse-modulated induction thermal plasmas Y.Tanaka Proc. 17th Int. Symp. Plasma Chem. ID86 2005/08
  •  High-speed surface nitridation of titanium using Ar-N2 pulse modulated induction thermal plasmas Y.Tanaka, T.Muroya, Y.Uesugi Proc. 17th Int. Symp. Plasma Chem. ID85 2005/08
  •  Prediction on temperature decay of Ar induction thermal plasma by injection of PTFE powders Y.Tanaka, Y.Takeuchi, Y.Uesugi, S.Kaneko, S.Okabe Abstracts of Second Int. Conf. Flow Dynamics OS6_3 2005/11
  •  Simulation of charging and dynamics of dust particles in the tokamak plasma environment with DUSTT code Y.Tanaka, A.Y.Pigarov, S.I.Krasheninnikov, T.K.Soboleva Abstracts of 47th Annual Meeting of the Division of Plasma Phys. CP1_00029 2005/12
  •  Control of number of nitrogen atom and enthalpy flow into reaction chamber using pulse-modulated induction thermal plasmas Y.Tanaka, T.Muroya, K.Hayashi, Y.Uesugi Abstracts of 2006 IEEE Int. Conf. Plasma Sci. 4D1_2 276 2006/06
  •  Reduction of heat flux and enhancement of nitrogen atomic flux into metal surface using Ar-N2 pulse-modulated induction thermal plasmas Y.Tanaka, T.Muroya, K.Hayashi, Y.Uesugi Abstracts of 8th Asia-Pacific Conf. Plasma Sci. & 19th Symp. Plasma Sci. Mater. 24 2006/07
  •  Modeling of high-power Ar-N2-H2 and Ar-N2-O2 induction thermal plasmas considering non-equilibrium effects Y.Tanaka Abstracts of 8th Asia-Pacific Conf. Plasma Sci. Technol. & 19th Symp. Plasma Sci 25 2006/07
  •  Calorimetric measurements for power flow analysis in high pressure inductively coupled plasmas Y.Uesgui, Y.Tanaka Abstracts of 8th APCPST and 19th SPSM 47 2006/07
  •  Investigation on polymer ablated vapor effect on temperature of thermal plasmas using inductively coupled plasma technique Y.Tanaka, Y.Takeuchi, Y.Uesugi, S.Kaneko, S.Okabe Proc. 16th Int. Conf. Gas Dischrges and their Applications 1 137-140 2006/09
  •  Numerical modelling of dust particle behaviour made of different materials in plasmas Y.Tanaka, A.Y.Pigarov, R.D.Smirnov, S.I.Krasheninnikov, N.Ohno, Y.Uesugi Abstracts of 11th Int. Conf. Plasma Edge Theory 2007/05
  •  New development of 10 kW-class arbitrary-waveform modulated induction thermal plasmas 'AMITP' Y.Tanaka, Y.Morishita, Y.Tanaka Proc. 18th Int.Symp. Plasma Chem. ISPC-18 28C-a8  ID=29 2007/08
  •  Influence of 'on-time'on increase in the excited nitrogen atom density in Ar-N2 pulse-modulated induction thermal plasmas Y.Tanaka, K.Hayashi, Y.Uesugi Proc.18th Int. Symp. Plasma Chem. ISPC-18 30P11-20  ID=344 2007/08
  •  Measurement of dynamic property of pulse modulated induction thermal plasmas using Langmuir probe Y.Takecguchi,Y.Kawashita, Y.Uesugi, Y.Tanaka Proc.18th Int. Symp. Plasma Chem ISPC-18 28P3-17  ID=443 2007/08
  •  Estimation of thermo-chemical properties of Ar plasmas with CxHyOz molecular gas for two-temperature chemically non-equilibrium modeling S.A.Al-Mamun, Y.Tanaka, Y.Uesugi Proc. 18th Int. Symp. Plasma Chem. ISPC-18 28P3-6 ID=555 2007/08
  •  Application of high power ICP to fusion oriented experiments of erosion and dust formation using graphite and refractory metal materials Y.Uesugi, Y.Fushie, Y.Tanaka Proc. 18th Int.Symp. Plasma Chem. ISPC-18 28P1-4  ID=407 2007/08
  •  Thermally and chemically non-equilibrium modelling of high-power Ar-N2-H2 Inductively coupled plasmas Y.Tanaka Proc. 18th Int.Symp. Plasma Chem. ISPC-18 30P11-23  ID=30 2007/08
  •  Study of carbon dust formation and their structure using inductively coupled plasmas under heavy atomic hydrogen irradiation Y.Takeguchi, M.Kyo, Y.Tanaka, Y.Uesugi Proc. 18th Plasma Surface Interaction Conf. PSI-18 P3-10 2008/05
  •  Assessment of dust dynamics and transport in tokamak edge plasmas R.D.Smirnov, Y.Tanaka et al Proc. 18th Int. Plasma Surface Interactions Conf. PSI-18 P1-23 2008/05
  •  Modeling on rapid ablation/sublimation from the surface of solid particles injected into thermal plasmas Y.Tanaka, J.Mostaghimi IEEE Int. Conf. Plasma Sci. ICOPS2008 1 321-321 2008/06
  •  Behaviors of excited N, N2+ and NH in modulated induction thermal plasmas Y.Tanaka, K.Hayashi.Y.Uesugi IEEE Int.Conf. Plasma Sci. ICOPS2008 1 246-246 2008/06
  •  Investigation on temperature decay of thermal plasma with ablation of polymer materials T.Sakuyama, Y.Tanaka, Y.Uesugi, S.Kaneko,S.Okabe Int. Congress on Plasma Phys. ICPP2008 FI-P2-247  308-308 2008/09
  •  Carbon Dust Formation under Heavy Atomic Hydrogen Irradiation M.Kyo, Y.Takeguchi, Y.Uesugi, Y.Tanaka Int. Congress on Plasma Phys. ICPP2008 F-P2-061  215-215 2008/09
  •  Chemically non-equilibrium modelling of Ar inductively coupled thermal plasma with C-H-O systems S.A.Al-Mamum,Y.Tanaka, Y.Uesugi nt. Congress on Plasma Phys. ICPP2008 CFR-P3-140 379-379 2008/09
  •  Carbon Erosion under Heavy Atomic Hydrogen Irradiation Y.Takeguchi, M.Kyo, Y.Uesugi, Y.Tanaka Int. Congress on Plasma Phys. ICPP2008 FF-P2-062  215 2008/09
  •  Dynamic behavior of hydrogen and nitrogen radicals in pulse modulated induction thermal plasmas T.Ito, Y.Tanaka, K.Hayashi, Y.Uesugi Int. Congress on Plasma Phys. ICPP2008 FI-P2-246  308-308 2008/09
  •  Numerical investigation on behaviour of ablation arcs confined with different polymer materials Y.Tanaka, K.Kawasaki, T.Onchi, Y.Uesugi Proc. 28th Int. Conf. Gas Discharges and their Applications GD2008 1 161-164 2008/09
  •  Control of induction thermal plasmas by coil current modulation in arbitrary-waveform Y.Tsubokawa, Y.Tanaka, Y.Uesugi Int. Congress on Plasma Phys. ICPP2008 EAP-P3-158  388-388 2008/09
  •  Effect of polymer ablation on temperature decay of thermal plasmas using induction thermal Plasma Irradiation technique Y.Tanaka, T.Sakuyama, D.Yamada, Y.Uesugi, S.Kaneko, S.Okabe Proc. 27th Int. Conf. Gas Discharges and their Applications GD2008 1 89-92 2008/09
  •  Influence of polymer and metallic vapour on low voltage arc T.Onchi, M.Isozaki, S.Sugiyama, Y.Tanaka, Y.Uesugi Proc. 27th Int. Conf. Gas Discharges and their Applications GD2008 1 101-104 2008/09
  •  Establishment of two-dimensional chemically non-equilibrium model of Ar-CO2-H2 inductively coupled thermal plasmas at atmospheric pressure S.A.Al-Mamun,Y.Tanaka,Y.Uesugi Asia-Pacific Conf. Plasma Sci. & Technol. HP101 2008/10
  •  Dust in fusion plasmas: Theory and modeling R.D.Smirnov, A.Yu. Pigarov , Y.Tanaka, et al. AIP Conference Proceedings 1041 59-62 2008/12
  •  Plasma temperature decay due to polymer ablation by thermal plasma irradiation Y.Tanaka, T.Sakuyama, K.Amitani, Y.Uesugi, S.Kaneko, S.Okabe 36th IEEE Int. Conf. on Plasma Sci., ICOPS2009 IO1B-8 2009/06
  •  Temperature control of modulated thermal plasmas with molecular gases Y.Tanaka, Y.Tsubokawa, F. Ezwan, Y.Uesugi Proc. of 19th Int. Sym. Plasma Chem. P2.11 16 2009/07
  •  Characterization of carbon dust particles formed under low energy and high flux atomic hydrogen irradiation M.Kyo, Y.Takeguchi, Y.Uesugi, Y.Tanaka, S.Masuzaki Proc. of 19th Int. Sym. Plasma Chem. P1.1 11 2009/07
  •  Estimation of two-temperature field of Ar-CH4-O2 ICPs with non-chemical and non-thermal equilibrium approach S.A.Almamun, Y.Tanaka, Y.Uesugi Proc. of 19th Int. Sym. Plasma Chem. P1.3 19 2009/07
  •  Effect of current modulation on nanopowder synthesis using induction thermal plasmas Y.Tanaka, T.Nagumo, H.Sakai, Y.Uesugi, Y.Sakai, K.Nakamura Proc. of 19th Int. Sym. Plasma Chem. O11 02 2009/07
  •  Chemical erosion of carbon material irradiated with low energy atomic hydrogen neutrals Y.Takeguchi, M.Kyo, Y.Uesugi, Y.Tanaka, S.Masuzaki Proc. of 19th Int. Sym. Plasma Chem. O1 01 2009/07
  •  Spectroscopic and Langmuir probe measurement of butane combustion with electrostatic discharges Y.Kawashita, S.Ono, Y.Uesugi, Y.Tanaka Proc. of 19th Int. Sym. Plasma Chem. P3.12 11 2009/07
  •  Suppression of carbon dust formation by nitrogen gas injection into argon/hydrogen plasmas M.Kyo,Y.Takeguchi, Y.Uesugi, Y.Tanaka, S.Masuzaki 7th General Scientific Assembly of the Asia Plasma & Fusion Assoc.(APFA09)  P27p1-39 2009/10
  •  Erosion properties of polycrystalline diamond under extremely high flux atomic hydrogen bombardment Y.Takeguchi, M.Kyo, Y.Uesugi, Y.Tanaka, S.Masuzaki 7th General Scientific Assembly of the Asia Plasma & Fusion Assoc.(APFA09)  P27p2-36 2009/10
  •  Erosion Properties of Polycrystalline Diamond Film under Low Energy and High Flux Atomic Hydrogen Irradiation Y.Takeguchi, M.Kyo, Y.Uesugi, Y.Tanaka, S.Masuzaki Plasma Surface Interaction PSI-2010  P2-53 2010/05
  •  Suppression of Carbon Agglomeration and Volatile Molecular Formation in C-H-N Reactive Molecular System Y.Uesugi, M.Kyo, Y.Takeguchi, Plasma Surface Interaction PSI-2010  P2-87 2010/05
  •  Simulation of dynamics of carbon dust particles in JT-60U tokamak Y.Tanaka, R.D.Smirnov, A.Y.Pigarov, H.Takenaga, N.Asakura, Y.Uesugi, N.Ohno Plasma Surface Interaction PSI-2010  P2-86 2010/05
  •  New development of the feedback control type of modulated induction thermal plasma (FBC-MITP) Y.Tanaka, Y. Tsubokawa, Y. Uesaka, Y. Uesugi Asia Pacific Conf. Plasma Sci. Technol. APCPST-10  ,OCC-08  2010-039 2010/07
  •  Frequency dependence for temperature modulation control of the feedback control type of modulated induction thermal plasma (FBC-MITP) Y.Tanaka, Y. Tsubokawa, Y. Uesaka*, Y. Uesugi Asia Pacific Conf. Plasma Sci. Technol. APCPST-10 2010039 2010/07
  •  Time variation in rotational and vibrational temperature of TiO during TiO2 nanoparticle synthesis using PMITP Y.Tanaka,H.Sakai,T.Tsuke,Y.Uesugi,Y.Sakai,K.Nakamura Asia Pacific Conf. Plasma Sci. Technol.APCPST-10  , OEM31 2010041 2010/07
  •  Particle composition of two-temperature SF6 plasma in pressure range from 0.1 to 1 MPa Proceeding of 12th International Conference on Gas Discharges and their Applications 2 566-569 1997/09
  •  Numerical investigation of O2/CO2 admixing effects upon the stability and dynamic responses of argon induction thermal plasma Proceeding of 15th International Symposium on Plasma Chemistry 3 1115-1120 2001/07
  •  Numerical approach for analysing transient behaviour of SF6 induction thermal plasma using reaction kinetics Proceeding of 14th International Symposium on Plasma Chemistry 1 245-250 1999/08
  •  Non-chemical equilibrium modelling of a N2 impulse arc at atmospheric pressure Proceeding of 14th International Symposium on Plasma Chemistry 1 891-896 1999/08
  •  Introduction of pulse modulation into induction thermal plasma for processing under non-equilibrium condition Proceeding of International Japan-China Bilateral Symposium on Advanced Materials Engineering 50-57 1999/03
  •  Influence of various gas inclusions upon response time of pulse modulated induction thermal plasma Proceeding of 15th International Symposium on Plasma Chemistry 1 141-146 2001/07
  •  Influence of gas flow rate and pressure upon non-chemical equilibrium composition in N2 thermal ICP Proceeding of 15th International Symposium on Plasma Chemistry 1 19-24 2001/07
  •  Electrical conductivity and enthalpy of two-temperature SF6 plasma at a pressure of 0.1 MPa Proceeding of International Conference on Electrical Engineering '97 726-729 1997/07
  •  Electrical conductivity and enthalpy of SF6 plasma in two-temperature state Proceeding of 12th International Conference on Gas Discharges and their Applications 1 94-97 1997/09
  •  Dynamic current-zero behaviour of wall-stabilised arcs in different arc-quenching media friendly to the environment Proceeding of 13th International Conference on Gas Discharges and their Applications 1 82-85 2000/09
  •  Deviation from local thermal equilibrium in SF6 post-arc channel exposed to transient recovery voltage 1998 IEEE International Conference on Plasma Science 150 1998/05
  •  Calculation of SF6 plasma composition in two-temperature steady state using reaction kinetics Proceeding of International Conference on Electrical Engineering '98 583-586 1998/07
  •  Fundamentals and applications of high-pressure induction thermal plasmas with coil current modulation Y.Tanaka The Open Plasma Physics Journal 2 120-132 2009/09

Conference Presentations

Arts and Fieldwork

Patent

Theme to the desired joint research

○Fundamental study on gas and materials used in circuit breakers using ICP
○Calculation of thermodynamic and transport properties of thermal plasma
○Numerical Simulation of Thermofluid Field in Induction Thermal Plasmas
○Nanopowder sythesis using induction thermal plasmas
○Numerical simulation of MHD dynamics of arc discharges
○Development of new materials processings using modulated induction thermal plasmas

Grant-in-Aid for Scientific Research

○「原料間歇同期投入を伴う任意波形変調熱プラズマを用いた高純度ナノ粒子の革新量産技術」(2014-2016) 
○「マイクロスポレーションポリマ粒子の直接噴出・溶発による直流アーク遮断の新技術創出」(2013-2014)
○「スマート変調制御高熱流メゾプラズマシステム開発による革新的高効率ナノ材料生成」(2011-2013) 
○「ナノ・マイクロ/スポレーションポリマ粒子分散系による大電流アーク遮断の新技術創出」(2011-2012) 
○「高次時間制御高熱流メゾプラズマによる革新的熱流・反応場制御とナノ材料生成応用」(2009-2010) 
○「ナノポリマ混合エアロゾルによる大電流プラズマ高速クエンチング革新技術の検討」(2009-2010) 
○「インテリジェント高周波誘導プラズマ源の開発」(2008-) 
○「電磁場時間軸任意制御による大電力誘導メゾプラズマ内反応場の協奏増幅」(2006-) 
○「周期変動型誘導熱プラズマを用いた高密度ラジカル流束制御と金属高速表面改質への応用」(2005-) 
○「電力用遮断器におけるノズル高分子材料の誘導熱プラズマ式選定手法の確立」(2003-) 
○「誘導熱プラズマ発生装置による高気圧遮断器消弧媒体プラズマの過渡特性診断」(2000-) 

Classes (Bachelors)

○High Voltage and Plasma Engineering(2017)
○Safety Engineering and Ethics(2017)
○Electrical Machinery(2017)
○Electric Power System Engineering(2017)
○Rules and Laws on Electrical Engineering(2017)
○Electrical and Electronic Engineering Laboratory I(2017)
○Rules and Laws on Electrical Engineering(2016)
○Electrical and Electronic Engineering Laboratory I(2016)
○High Voltage and Plasma Engineering(2016)
○Electric Power System Engineering(2016)
○Safety Engineering and Ethics(2016)
○Electrical Machinery(2016)

Classes (Graduate Schools)

○Numerical Simulation Method for Plasmas(2017)
○Numerical Simulation Method for Plasmas(2017)
○Advanced Seminar(2017)
○Numerical Simulation Method for Plasmas(2017)
○Introduction to Numerical Analysis of Plasma Flow(2017)
○Introduction to Electric Power Conversion Engineering A(2017)
○Numerical Simulation Method for Plasmas(2017)
○Introduction to Electric Power Conversion Engineering B(2017)
○Introduction to Numerical Analysis of Plasma Flow(2016)
○Introduction to Electric Power Conversion Engineering A(2016)
○Numerical Simulation Method for Plasmas(2016)
○Introduction to Electric Power Conversion Engineering B(2016)

International Project

International Students

Lecture themes

Others (Social Activities)

To Page Top